On Sat, May 30, 2015 at 02:00:59AM +0300, Dmitry Tunin wrote:
> Focaltech touchpads report finger width in packet[5] of absolute packet.
> Range for width in raw format is 0x10 - 0x70. Second half-byte is always 0.
> 0xff is reported, when a large contact area is detected.
> This can be handled in userspace.
> 
> Signed-off-by: Dmitry Tunin <[email protected]>

Let's add a few people...

> ---
>  drivers/input/mouse/focaltech.c | 20 +++++++++++++++++---
>  1 file changed, 17 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/input/mouse/focaltech.c b/drivers/input/mouse/focaltech.c
> index 23d2594..0c3b698 100644
> --- a/drivers/input/mouse/focaltech.c
> +++ b/drivers/input/mouse/focaltech.c
> @@ -105,6 +105,16 @@ struct focaltech_hw_state {
>  
>       /* True if the clickpad has been pressed. */
>       bool pressed;
> +
> +     /*
> +     * Finger width 0-7 and 15 for a very big contact area.
> +     * 15 value stays until the finger is released.
> +     * Width is reported only in absolute packets.
> +     * Since hardware reports width only for last touching finger,
> +     * there is no need to store width for every specific finger, so 
> +     * we keep only last value reported.
> +     */
> +     unsigned int width;
>  };
>  
>  struct focaltech_data {
> @@ -112,7 +122,7 @@ struct focaltech_data {
>       struct focaltech_hw_state state;
>  };
>  
> -static void focaltech_report_state(struct psmouse *psmouse)
> +static void focaltech_report_state(struct psmouse *psmouse, bool abs)
>  {
>       struct focaltech_data *priv = psmouse->private;
>       struct focaltech_hw_state *state = &priv->state;
> @@ -137,6 +147,7 @@ static void focaltech_report_state(struct psmouse 
> *psmouse)
>                       input_report_abs(dev, ABS_MT_POSITION_X, clamped_x);
>                       input_report_abs(dev, ABS_MT_POSITION_Y,
>                                        priv->y_max - clamped_y);
> +                     if (abs) input_report_abs(dev, ABS_TOOL_WIDTH, 
> state->width);

I am not sure this condition and the change in focaltech_process_packet
are needed. The relative packets augment absolute one and we expect
width not change so we can always report state->width (either updated or
cached) and input core will drop dupes.

>               }
>       }
>       input_mt_report_pointer_emulation(dev, true);
> @@ -187,6 +198,7 @@ static void focaltech_process_abs_packet(struct psmouse 
> *psmouse,
>  
>       state->fingers[finger].x = ((packet[1] & 0xf) << 8) | packet[2];
>       state->fingers[finger].y = (packet[3] << 8) | packet[4];
> +     state->width = packet[5] >> 4;
>       state->fingers[finger].valid = true;
>  }
>  
> @@ -228,22 +240,23 @@ static void focaltech_process_packet(struct psmouse 
> *psmouse)
>       switch (packet[0] & 0xf) {
>       case FOC_TOUCH:
>               focaltech_process_touch_packet(psmouse, packet);
> +             focaltech_report_state(psmouse, false);
>               break;
>  
>       case FOC_ABS:
>               focaltech_process_abs_packet(psmouse, packet);
> +             focaltech_report_state(psmouse, true);
>               break;
>  
>       case FOC_REL:
>               focaltech_process_rel_packet(psmouse, packet);
> +             focaltech_report_state(psmouse, false);
>               break;
>  
>       default:
>               psmouse_err(psmouse, "Unknown packet type: %02x\n", packet[0]);
>               break;
>       }
> -
> -     focaltech_report_state(psmouse);
>  }
>  
>  static psmouse_ret_t focaltech_process_byte(struct psmouse *psmouse)
> @@ -331,6 +344,7 @@ static void focaltech_set_input_params(struct psmouse 
> *psmouse)
>       __set_bit(EV_ABS, dev->evbit);
>       input_set_abs_params(dev, ABS_MT_POSITION_X, 0, priv->x_max, 0, 0);
>       input_set_abs_params(dev, ABS_MT_POSITION_Y, 0, priv->y_max, 0, 0);
> +     input_set_abs_params(dev, ABS_TOOL_WIDTH, 0, 15, 0, 0);
>       input_mt_init_slots(dev, 5, INPUT_MT_POINTER);
>       __set_bit(INPUT_PROP_BUTTONPAD, dev->propbit);
>  }
> -- 
> 1.9.1
> 

Thanks.

-- 
Dmitry
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to