Add support for the Bosto 14WA graphics tablet. This is originally based
off the hanwang.c tablet driver since the chip is similar.
I added what I think are the right entries to quirks to make HID ignore
the tablet - so that this driver can load. I'm still working on getting a
proper kernel dev VM so I've not tested that part. But the change is
trivial.
checkpatch.pl said I may need to edit MAINTAINERS because of the
new file but I don't see anything about that in the SubmittingPatches
doc. Do I need to do that?
I'm a novice, apologies for any mistakes.
Signed-off-by: Leslie Viljoen <leslievilj...@gmail.com>
---
drivers/hid/hid-ids.h | 1 +
drivers/hid/usbhid/hid-quirks.c | 2 +
drivers/input/tablet/bosto_14wa.c | 555 ++++++++++++++++++++++++++++++++++++++
3 files changed, 558 insertions(+)
create mode 100644 drivers/input/tablet/bosto_14wa.c
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index f769208..77ec24a 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -450,6 +450,7 @@
#define USB_VENDOR_ID_HANWANG 0x0b57
#define USB_DEVICE_ID_HANWANG_TABLET_FIRST 0x5000
#define USB_DEVICE_ID_HANWANG_TABLET_LAST 0x8fff
+#define USB_DEVICE_ID_BOSTO14WA_2 0x9018
#define USB_VENDOR_ID_HANVON 0x20b3
#define USB_DEVICE_ID_HANVON_MULTITOUCH 0x0a18
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 1dff8f0..840b5d7 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -132,6 +132,8 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_PI_ENGINEERING,
USB_DEVICE_ID_PI_ENGINEERING_VEC_USB_FOOTPEDAL,
HID_QUIRK_HIDINPUT_FORCE },
+ { USB_VENDOR_ID_HANWANG, USB_DEVICE_ID_BOSTO14WA_2, HID_QUIRK_IGNORE },
+
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_MULTI_TOUCH,
HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_CHICONY, USB_DEVICE_ID_CHICONY_WIRELESS,
HID_QUIRK_MULTI_INPUT },
{ USB_VENDOR_ID_SIGMA_MICRO, USB_DEVICE_ID_SIGMA_MICRO_KEYBOARD,
HID_QUIRK_NO_INIT_REPORTS },
diff --git a/drivers/input/tablet/bosto_14wa.c
b/drivers/input/tablet/bosto_14wa.c
new file mode 100644
index 0000000..64f1d71
--- /dev/null
+++ b/drivers/input/tablet/bosto_14wa.c
@@ -0,0 +1,555 @@
+/*
+ * USB Bosto tablet support
+ *
+ * Original Copyright (c) 2010 Xing Wei <weix...@hanwang.com.cn>
+ *
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/jiffies.h>
+#include <linux/stat.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/usb/input.h>
+#include <linux/fcntl.h>
+#include <linux/unistd.h>
+
+#define DRIVER_DESC "USB Bosto(2nd Gen) tablet driver"
+#define DRIVER_LICENSE "GPL"
+
+MODULE_AUTHOR("Xing Wei <weix...@hanwang.com.cn>");
+MODULE_AUTHOR("Aidan Walton <ai...@wires3.net>");
+MODULE_AUTHOR("Leslie Viljoen <leslievilj...@gmail.com>");
+MODULE_AUTHOR("Tomasz Flis <tfli...@gmail.com>");
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_LICENSE(DRIVER_LICENSE);
+
+#define USB_VENDOR_ID_HANWANG 0x0b57
+#define USB_DEVICE_ID_BOSTO14WA_2 0x9018
+
+#define BOSTO_TABLET_INT_CLASS 0x0003
+#define BOSTO_TABLET_INT_SUB_CLASS 0x0001
+#define BOSTO_TABLET_INT_PROTOCOL 0x0002
+
+/* Delay between TOOL_IN event and first reported pressure > 0 (in ms).
+ * Used to suppress settle time for pen ABS positions.
+ */
+#define PEN_WRITE_DELAY 230
+#define PKGLEN_MAX 10
+#define MAX_DEVICE_NAME 64
+#define MAX_PHYS_ADDRESS 32
+#define NO_ERROR 0
+
+/* device IDs */
+#define STYLUS_DEVICE_ID 0x02
+#define TOUCH_DEVICE_ID 0x03
+#define CURSOR_DEVICE_ID 0x06
+#define ERASER_DEVICE_ID 0x0A
+#define PAD_DEVICE_ID 0x0F
+
+enum bosto_tablet_type {
+ BOSTO_14WA
+};
+
+struct bosto {
+ unsigned char *data;
+ dma_addr_t data_dma;
+ struct input_dev *stylus;
+ struct input_dev *eraser;
+ struct usb_device *usbdev;
+ struct urb *urb0;
+ struct urb *urb1;
+ const struct bosto_features *features;
+ unsigned int current_tool;
+ unsigned int current_id;
+ char stylus_name[MAX_DEVICE_NAME];
+ char eraser_name[MAX_DEVICE_NAME];
+ char phys[MAX_PHYS_ADDRESS];
+};
+
+struct bosto_features {
+ unsigned short pid;
+ char *name;
+ enum bosto_tablet_type type;
+ int pkg_len;
+ int max_x;
+ int max_y;
+ int max_tilt_x;
+ int max_tilt_y;
+ int max_pressure;
+};
+
+static const struct bosto_features features_array[] = {
+ { USB_DEVICE_ID_BOSTO14WA_2, "Bosto Kingtee 14WA", BOSTO_14WA, PKGLEN_MAX,
+ 0x27de, 0x1cfe, 0x3f, 0x7f, 2048 },
+};
+
+static const int hw_eventtypes[] = {
+ EV_KEY, EV_ABS, EV_MSC,
+};
+
+static const int hw_absevents[] = {
+ ABS_X, ABS_Y, ABS_PRESSURE, ABS_MISC
+};
+
+static const int hw_btnevents[] = {
+ BTN_DIGI, BTN_TOUCH, BTN_STYLUS, BTN_STYLUS2, BTN_TOOL_PEN,
+ BTN_TOOL_BRUSH, BTN_TOOL_RUBBER, BTN_TOOL_PENCIL, BTN_TOOL_AIRBRUSH,
+ BTN_TOOL_FINGER, BTN_TOOL_MOUSE
+};
+
+static const int hw_mscevents[] = {
+ MSC_SERIAL,
+};
+
+static struct input_dev *get_current_input(struct bosto *bosto)
+{
+ return (bosto->current_id == ERASER_DEVICE_ID) ? bosto->eraser :
bosto->stylus;
+}
+
+static void bosto_tool_out(struct bosto *bosto)
+{
+ struct input_dev *input_dev;
+
+ input_dev = get_current_input(bosto);
+ input_report_key(input_dev, bosto->current_tool, 0);
+ bosto->current_id = 0;
+}
+
+static void bosto_tool_in(struct bosto *bosto, unsigned long *stamp,
u8 pen_end)
+{
+ unsigned int id, tool;
+ struct input_dev *input_dev;
+
+ /* Time stamp the 'TOOL IN' event and add delay. */
+ *stamp = jiffies + PEN_WRITE_DELAY * HZ / 1000;
+
+ switch (pen_end & 0xf0) {
+ /* Stylus Tip in prox */
+ case 0x20:
+ id = STYLUS_DEVICE_ID;
+ tool = BTN_TOOL_PEN;
+ break;
+
+ /* Stylus Eraser in prox */
+ case 0xa0:
+ id = ERASER_DEVICE_ID;
+ tool = BTN_TOOL_RUBBER;
+ break;
+
+ default:
+ id = 0;
+ tool = BTN_TOOL_PEN;
+ break;
+ }
+
+ bosto->current_id = id;
+ bosto->current_tool = tool;
+ input_dev = get_current_input(bosto);
+ input_report_abs(input_dev, ABS_MISC, id);
+ input_report_key(input_dev, tool, 1);
+}
+
+static void bosto_pen_float(struct bosto *bosto, u16 *p, u16 *x, u16 *y,
+ u8 *data)
+{
+ struct input_dev *input_dev;
+ *x = (data[1] << 8) | data[2]; /* Set x ABS */
+ *y = (data[3] << 8) | data[4]; /* Set y ABS */
+ *p = 0;
+
+ input_dev = get_current_input(bosto);
+ input_report_key(input_dev, bosto->current_tool, 1);
+ input_report_key(input_dev, BTN_TOUCH, 0);
+
+ switch (data[0]) {
+ case 0xa0 ... 0xa1:
+ input_report_key(input_dev, BTN_STYLUS, 0);
+ break;
+ case 0xa2 ... 0xa3:
+ input_report_key(input_dev, BTN_STYLUS, 1);
+ break;
+ }
+}
+
+static void bosto_pen_contact(struct bosto *bosto, u16 *p, u16 *x, u16 *y,
+ unsigned long stamp, u8 *data)
+{
+ struct input_dev *input_dev;
+
+ /*
+ * All a little strange; these 4 bytes are always seen whenever the pen
+ * is in contact with the tablet. 'e0 + e1', without the stylus button
+ * pressed and 'e2 + e3' with the stylus button pressed. Either of the
+ * buttons. In either case the byte value jitters between a pair of
+ * either of the two states dependent on the button press.
+ */
+
+ input_dev = get_current_input(bosto);
+ input_report_key(input_dev, bosto->current_tool, 1);
+ input_report_key(input_dev, BTN_TOUCH, 1);
+
+ *x = (data[1] << 8) | data[2]; /* Set x ABS */
+ *y = (data[3] << 8) | data[4]; /* Set y ABS */
+
+ /*
+ * Set 2048 Level pressure sensitivity.
+ * NOTE: The pen button magnifies the pressure sensitivity. Bring
+ * the pen in with the button pressed, ignore the right click response
+ * and keep the button held down. Enjoy the pressure magnification.
+ */
+
+ if (time_after(jiffies, stamp))
+ *p = (data[5] << 3) | ((data[6] & 0xc0) >> 5);
+ else
+ *p = 0;
+
+ switch (data[0]) {
+ case 0xe0 ... 0xe1:
+ input_report_key(input_dev, BTN_STYLUS, 0); /* no stylus btn */
+ break;
+ case 0xe2 ... 0xe3:
+ input_report_key(input_dev, BTN_STYLUS, 1); /* stylus btn */
+ break;
+ }
+}
+
+
+static void bosto_parse_packet(struct bosto *bosto)
+{
+ unsigned char *data = bosto->data;
+ struct input_dev *input_dev;
+ struct usb_device *dev = bosto->usbdev;
+ u16 x = 0;
+ u16 y = 0;
+ u16 p = 0;
+ static unsigned long stamp;
+
+ dev_dbg(&dev->dev,
+ "Bosto packet: %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x\n",
+ data[0], data[1], data[2], data[3], data[4], data[5], data[6],
+ data[7], data[8], data[9]);
+
+ switch (data[0]) {
+ /* pen event */
+ case 0x02:
+ switch (data[1]) {
+ case 0x80:
+ bosto_tool_out(bosto);
+ dev_dbg(&dev->dev, "TOOL OUT. PEN ID:Tool %x:%x\n",
+ bosto->current_id, bosto->current_tool);
+ break;
+
+ case 0xc2:
+ bosto_tool_in(bosto, &stamp, data[3]);
+ dev_dbg(&dev->dev, "TOOL IN: ID:Tool %x:%x\n",
+ bosto->current_id, bosto->current_tool);
+ break;
+
+ /* Pen trackable but not in contact with screen */
+ case 0xa0 ... 0xa3:
+ bosto_pen_float(bosto, &p, &x, &y, &data[1]);
+ dev_dbg(&dev->dev, "PEN FLOAT: ID:Tool %x:%x\n",
+ bosto->current_id, bosto->current_tool);
+ break;
+
+ /* Pen contact */
+ case 0xe0 ... 0xe3:
+ bosto_pen_contact(bosto, &p, &x, &y, stamp, &data[1]);
+ dev_dbg(&dev->dev, "PEN TOUCH: ID:Tool %x:%x\n",
+ bosto->current_id, bosto->current_tool);
+ break;
+ }
+ break;
+
+ case 0x0c:
+ dev_dbg(&dev->dev,
+ "Tablet Event. Packet data[0]: %02x\n", data[0]);
+ input_dev = get_current_input(bosto);
+ input_report_abs(input_dev, ABS_MISC, bosto->current_id);
+ input_event(input_dev, EV_MSC, MSC_SERIAL, bosto->features->pid);
+ input_sync(input_dev);
+ break;
+
+ default:
+ dev_dbg(&dev->dev,
+ "Error packet. Packet data[0]: %02x\n", data[0]);
+ break;
+ }
+
+ input_dev = get_current_input(bosto);
+ input_report_abs(input_dev, ABS_X, le16_to_cpup((__le16 *)&x));
+ input_report_abs(input_dev, ABS_Y, le16_to_cpup((__le16 *)&y));
+ input_report_abs(input_dev, ABS_PRESSURE, p);
+ input_event(input_dev, EV_MSC, MSC_SERIAL, bosto->features->pid);
+
+ input_sync(bosto->stylus);
+ input_sync(bosto->eraser);
+}
+
+static void bosto_irq(struct urb *urb)
+{
+ struct bosto *bosto = urb->context;
+ struct usb_device *dev = bosto->usbdev;
+ int retval;
+
+ switch (urb->status) {
+ case 0:
+ /* success */;
+ bosto_parse_packet(bosto);
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ /* this urb is terminated, clean up */
+ dev_err(&dev->dev, "%s - urb shutting down with status: %d",
+ __func__, urb->status);
+ return;
+ default:
+ dev_err(&dev->dev, "%s - nonzero urb status received: %d",
+ __func__, urb->status);
+ break;
+ }
+
+ retval = usb_submit_urb(urb, GFP_ATOMIC);
+ if (retval)
+ dev_err(&dev->dev, "%s - usb_submit_urb failed with result %d",
+ __func__, retval);
+}
+
+static int bosto_stylus_open(struct input_dev *dev)
+{
+ struct bosto *bosto = input_get_drvdata(dev);
+
+ bosto->urb0->dev = bosto->usbdev;
+ if (usb_submit_urb(bosto->urb0, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void bosto_stylus_close(struct input_dev *dev)
+{
+ struct bosto *bosto = input_get_drvdata(dev);
+
+ usb_kill_urb(bosto->urb0);
+}
+
+static int bosto_eraser_open(struct input_dev *dev)
+{
+ struct bosto *bosto = input_get_drvdata(dev);
+
+ bosto->urb1->dev = bosto->usbdev;
+ if (usb_submit_urb(bosto->urb1, GFP_KERNEL))
+ return -EIO;
+
+ return 0;
+}
+
+static void bosto_eraser_close(struct input_dev *dev)
+{
+ struct bosto *bosto = input_get_drvdata(dev);
+
+ usb_kill_urb(bosto->urb1);
+}
+
+static bool get_features(struct usb_device *dev, struct bosto *bosto)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(features_array); i++) {
+ if (le16_to_cpu(dev->descriptor.idProduct) == features_array[i].pid) {
+ bosto->features = &features_array[i];
+ return true;
+ }
+ }
+
+ return false;
+}
+
+static int bosto_create_input_device(struct usb_interface *intf,
+ struct usb_device *dev, struct bosto *bosto, struct urb **urb,
+ struct input_dev **device, const char *device_name,
+ int (*open)(struct input_dev *), void (*close)(struct input_dev *))
+{
+ int i;
+ int status = NO_ERROR;
+ struct usb_endpoint_descriptor *endpoint;
+
+ *urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (*urb) {
+ endpoint = &intf->cur_altsetting->endpoint[0].desc;
+ usb_fill_int_urb(*urb, dev, usb_rcvintpipe(dev,
+ endpoint->bEndpointAddress), bosto->data,
+ bosto->features->pkg_len, bosto_irq, bosto,
+ endpoint->bInterval);
+
+ (*urb)->transfer_dma = bosto->data_dma;
+ (*urb)->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
+
+ *device = input_allocate_device();
+ if (*device) {
+ usb_make_path(dev, bosto->phys, sizeof(bosto->phys));
+ strlcat(bosto->phys, "/input0", sizeof(bosto->phys));
+ (*device)->phys = bosto->phys;
+
+ (*device)->name = device_name;
+ usb_to_input_id(dev, &(*device)->id);
+
+ (*device)->dev.parent = &intf->dev;
+
+ input_set_drvdata(*device, bosto);
+
+ (*device)->open = open;
+ (*device)->close = close;
+
+ for (i = 0; i < ARRAY_SIZE(hw_eventtypes); ++i)
+ __set_bit(hw_eventtypes[i], (*device)->evbit);
+
+ for (i = 0; i < ARRAY_SIZE(hw_absevents); ++i)
+ __set_bit(hw_absevents[i], (*device)->absbit);
+
+ for (i = 0; i < ARRAY_SIZE(hw_btnevents); ++i)
+ __set_bit(hw_btnevents[i], (*device)->keybit);
+
+ for (i = 0; i < ARRAY_SIZE(hw_mscevents); ++i)
+ __set_bit(hw_mscevents[i], (*device)->mscbit);
+
+ input_set_abs_params(*device, ABS_X, 0,
+ bosto->features->max_x, 0, 0);
+ input_set_abs_params(*device, ABS_Y, 0,
+ bosto->features->max_y, 0, 0);
+ input_set_abs_params(*device, ABS_PRESSURE, 0,
+ bosto->features->max_pressure, 0, 0);
+
+ status = input_register_device(*device);
+ if (status != NO_ERROR) {
+ input_free_device(*device);
+ usb_free_urb(*urb);
+ }
+ } else {
+ usb_free_urb(*urb);
+ status = -ENOMEM;
+ }
+ } else {
+ status = -ENOMEM;
+ }
+ return status;
+}
+
+static int bosto_probe(struct usb_interface *intf, const struct
usb_device_id *id)
+{
+ struct bosto *bosto;
+ int status = NO_ERROR;
+ struct usb_device *dev = interface_to_usbdev(intf);
+
+ dev_info(&dev->dev, "Bosto_Probe checking Tablet\n");
+
+ bosto = kzalloc(sizeof(struct bosto), GFP_KERNEL);
+
+ if (bosto && get_features(dev, bosto)) {
+ bosto->data = usb_alloc_coherent(dev, bosto->features->pkg_len,
+ GFP_KERNEL, &bosto->data_dma);
+
+ if (bosto->data != NULL) {
+ bosto->usbdev = dev;
+ strlcpy(bosto->stylus_name, bosto->features->name,
+ sizeof(bosto->stylus_name));
+ strlcat(bosto->stylus_name, " stylus",
+ sizeof(bosto->stylus_name));
+ strlcpy(bosto->eraser_name, bosto->features->name,
+ sizeof(bosto->eraser_name));
+ strlcat(bosto->eraser_name, " eraser",
+ sizeof(bosto->eraser_name));
+
+ status = bosto_create_input_device(intf, dev, bosto,
+ &bosto->urb0, &bosto->stylus,
+ bosto->stylus_name, bosto_stylus_open,
+ bosto_stylus_close);
+
+ if (status == NO_ERROR) {
+ status = bosto_create_input_device(intf, dev,
+ bosto, &bosto->urb1, &bosto->eraser,
+ bosto->eraser_name, bosto_eraser_open,
+ bosto_eraser_close);
+ }
+
+ if (status == NO_ERROR) {
+ usb_set_intfdata(intf, bosto);
+ return status;
+ }
+
+ usb_free_coherent(dev, bosto->features->pkg_len,
+ bosto->data, bosto->data_dma);
+ }
+
+ } else {
+ status = -ENOMEM;
+ }
+
+ kfree(bosto);
+ return status;
+}
+
+static void bosto_disconnect(struct usb_interface *intf)
+{
+ struct bosto *bosto = usb_get_intfdata(intf);
+
+ input_unregister_device(bosto->stylus);
+ input_unregister_device(bosto->eraser);
+ usb_free_urb(bosto->urb1);
+ usb_free_urb(bosto->urb0);
+ usb_free_coherent(interface_to_usbdev(intf), bosto->features->pkg_len,
+ bosto->data, bosto->data_dma);
+ kfree(bosto);
+ usb_set_intfdata(intf, NULL);
+}
+
+static const struct usb_device_id bosto_ids[] = {
+ { USB_DEVICE_AND_INTERFACE_INFO(
+ USB_VENDOR_ID_HANWANG,
+ USB_DEVICE_ID_BOSTO14WA_2,
+ BOSTO_TABLET_INT_CLASS,
+ BOSTO_TABLET_INT_SUB_CLASS,
+ BOSTO_TABLET_INT_PROTOCOL) },
+ {}
+};
+
+
+MODULE_DEVICE_TABLE(usb, bosto_ids);
+
+static struct usb_driver bosto_driver = {
+ .name = "bosto_14wa",
+ .probe = bosto_probe,
+ .disconnect = bosto_disconnect,
+ .id_table = bosto_ids,
+};
+
+static int __init bosto_init(void)
+{
+ printk(KERN_INFO "Bosto 2nd Generation USB Driver module being
initialised\n");
+ return usb_register(&bosto_driver);
+}
+
+static void __exit bosto_exit(void)
+{
+ usb_deregister(&bosto_driver);
+}
+
+module_init(bosto_init);
+module_exit(bosto_exit);
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
