> -----Original Message-----
> From: linux-input-ow...@vger.kernel.org 
> [mailto:linux-input-ow...@vger.kernel.org] On Behalf Of Karsten Merker
> Sent: 09 October, 2015 20:56
> To: Bastien Nocera; Dmitry Torokhov; Tirdea, Irina; Aleksei Mamlin; 
> linux-input@vger.kernel.org; Ian Campbell
> Cc: devicet...@vger.kernel.org; linux-ker...@vger.kernel.org; Chen-Yu Tsai; 
> Karsten Merker
> Subject: [PATCH RFC V2 3/3] Input: goodix - update dt bindings documentation 
> (axis swapping/inversion)
> 
> The goodix touchscreen driver has gained support for the
> optional touchscreen-inverted-x, touchscreen-inverted-y
> and touchscreen-swapped-x-y properties as described in
> Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt.
> 
> Document these properties in the goodix bindings description.
> 
> Signed-off-by: Karsten Merker <mer...@debian.org>

Reviewed-by: Irina Tirdea <irina.tir...@intel.com>

> ---
>  Documentation/devicetree/bindings/input/touchscreen/goodix.txt | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> index 4db3393..4ecd0e1 100644
> --- a/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> +++ b/Documentation/devicetree/bindings/input/touchscreen/goodix.txt
> @@ -14,6 +14,7 @@ Required properties:
>   - interrupts                : Interrupt to which the chip is connected
>   - irq-gpio          : GPIO pin used for IRQ
>   - reset-gpio                : GPIO pin used for reset
> +
>  Optional properties:
> 
>   - esd-recovery-timeout-ms : ESD poll time (in milli seconds) for the driver 
> to
> @@ -21,6 +22,11 @@ Optional properties:
>                              device. ESD is disabled if this property is not 
> set
>                              or is set to 0.
> 
> + - touchscreen-inverted-x  : X axis is inverted (boolean)
> + - touchscreen-inverted-y  : Y axis is inverted (boolean)
> + - touchscreen-swapped-x-y : X and Y axis are swapped (boolean)
> +                             (swapping is done after inverting the axis)
> +
>  Example:
> 
>       i2c@00000000 {
> --
> 2.1.4
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-input" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to