On Mon, Nov 2, 2015 at 11:14 PM, Andrew Duggan <adug...@synaptics.com> wrote:
> I have been continuing to work on the synaptics-rmi4 driver and was just > trying to figure out what the next step should be. I recently uploaded my > changes here https://github.com/aduggan/linux. I just tested this patch set on the Ux500 with a TVK UI board. I added this: i2c@80110000 { synaptics@4b { /* Synaptics RMI4 TM1217 touchscreen */ compatible = "syna,rmi-i2c"; #address-cells = <1>; #size-cells = <0>; reg = <0x4b>; pinctrl-names = "default"; pinctrl-0 = <&synaptics_tvk_mode>; interrupt-parent = <&gpio2>; interrupts = <20 IRQ_TYPE_EDGE_FALLING>; syna,sensor-name="TM1217"; rmi-f01@1 { reg = <0x1>; syna,nosleep = <1>; }; rmi-f11@11 { reg = <0x11>; syna,f11-flip-x = <1>; syna,sensor-type = <1>; }; }; }; Bootlog: [ 2.143127] rmi_f01 sensor00.fn01: found RMI device, manufacturer: Synaptics, product: TM1217 [ 2.155242] input: Synaptics RMI4 Touch Sensor as /devices/sensor00/input/input2 [ 2.165466] rmi_i2c 3-004b: registered rmi i2c driver at 0x4b. Doing cat /dev/input/event2 gives noise on screen, yay. Some quick questions I see immediately: - The DT examples in Documentation/devicetree/bindings/input/* omit #address-cells = <1>; #size-cells = <0>; for the I2C device children (i.e. the function nodes), it needs to look like my example above to work. - All things boolean like syna,nosleep and syna,f11-flip-x should just be like: syna,nosleep; syna,f11-flip-x; in the device tree. Use of_property_read_bool() for these. - syna,sensor-name = "FOO"; Why? The bootlog clearly states that f01 can autodetect the sensor type. And f01 is always compiled in, right? So just cut this binding and handling, if the two don't match it's just super-confusing. - /proc/interrupts say this: 206: 114 0 nmk2-64-95 20 Edge sensor00 sensor00? Unhelpful. Why can't it say "TM1217", give take an instance number, with the detected sensor name? But to me the code seems overall pretty mature. It just works. I'll be happy to give a more detailed review if you post it. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-input" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
