On Wed, Dec 02, 2015 at 11:07:14AM +0100, Uwe Kleine-König wrote:
> Signed-off-by: Uwe Kleine-König <u.kleine-koe...@pengutronix.de>
> ---
> .../devicetree/bindings/input/rotary-encoder.txt | 2 +-
For the binding:
Acked-by: Rob Herring <r...@kernel.org>
> arch/arm/mach-pxa/raumfeld.c | 25 +++-
> drivers/input/misc/rotary_encoder.c | 127
> +++++++++------------
> include/linux/rotary_encoder.h | 4 -
> 4 files changed, 79 insertions(+), 79 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/input/rotary-encoder.txt
> b/Documentation/devicetree/bindings/input/rotary-encoder.txt
> index de99cbbbf6da..6c9f0c8a846c 100644
> --- a/Documentation/devicetree/bindings/input/rotary-encoder.txt
> +++ b/Documentation/devicetree/bindings/input/rotary-encoder.txt
> @@ -1,7 +1,7 @@
> Rotary encoder DT bindings
>
> Required properties:
> -- gpios: a spec for two GPIOs to be used
> +- gpios: a spec for at least two GPIOs to be used, most significant first
>
> Optional properties:
> - linux,axis: the input subsystem axis to map to this rotary encoder.
> diff --git a/arch/arm/mach-pxa/raumfeld.c b/arch/arm/mach-pxa/raumfeld.c
> index 36571a9a44fe..f47e59b0efa8 100644
> --- a/arch/arm/mach-pxa/raumfeld.c
> +++ b/arch/arm/mach-pxa/raumfeld.c
> @@ -21,6 +21,7 @@
> #include <linux/platform_device.h>
> #include <linux/interrupt.h>
> #include <linux/gpio.h>
> +#include <linux/gpio/machine.h>
> #include <linux/smsc911x.h>
> #include <linux/input.h>
> #include <linux/rotary_encoder.h>
> @@ -370,10 +371,25 @@ static struct rotary_encoder_platform_data
> raumfeld_rotary_encoder_info = {
> .steps = 24,
> .axis = REL_X,
> .relative_axis = 1,
> - .gpio_a = GPIO_VOLENC_A,
> - .gpio_b = GPIO_VOLENC_B,
> - .inverted_a = 1,
> - .inverted_b = 0,
> +};
> +
> +static struct gpiod_lookup_table raumfeld_rotary_encoder_gpio_lookup = {
> + .dev_id = "rotary_encoder.0",
> + .table = {
> + {
> + .chip_label = "gpio-0",
> + .chip_hwnum = GPIO_VOLENC_A,
> + .idx = 0,
> + .flags = GPIO_ACTIVE_LOW,
> + },
> + {
> + .chip_label = "gpio-0",
> + .chip_hwnum = GPIO_VOLENC_B,
> + .idx = 1,
> + .flags = GPIO_ACTIVE_HIGH,
> + },
> + { /* sentinel */ }
> + },
> };
>
> static struct platform_device rotary_encoder_device = {
> @@ -1051,6 +1067,7 @@ static void __init raumfeld_controller_init(void)
> int ret;
>
> pxa3xx_mfp_config(ARRAY_AND_SIZE(raumfeld_controller_pin_config));
> + gpiod_add_lookup_table(&raumfeld_rotary_encoder_gpio_lookup);
> platform_device_register(&rotary_encoder_device);
> spi_register_board_info(ARRAY_AND_SIZE(controller_spi_devices));
> i2c_register_board_info(0, &raumfeld_controller_i2c_board_info, 1);
> diff --git a/drivers/input/misc/rotary_encoder.c
> b/drivers/input/misc/rotary_encoder.c
> index 0582e851993f..99f19e037370 100644
> --- a/drivers/input/misc/rotary_encoder.c
> +++ b/drivers/input/misc/rotary_encoder.c
> @@ -25,7 +25,6 @@
> #include <linux/slab.h>
> #include <linux/of.h>
> #include <linux/of_platform.h>
> -#include <linux/of_gpio.h>
> #include <linux/pm.h>
>
> #define DRV_NAME "rotary-encoder"
> @@ -36,45 +35,47 @@ struct rotary_encoder {
> /* configuration */
> unsigned int steps;
> unsigned int axis;
> - unsigned int gpio_a;
> - unsigned int gpio_b;
> - unsigned int inverted_a;
> - unsigned int inverted_b;
> unsigned int steps_per_period;
> bool relative_axis;
> bool rollover;
> bool wakeup_source;
>
> - unsigned int irq_a;
> - unsigned int irq_b;
> + struct gpio_descs *gpios;
> + unsigned int *irq;
>
> /* state */
> unsigned int pos;
> bool armed;
> - unsigned char dir; /* 0 - clockwise, 1 - CCW */
> + signed char dir; /* 1 - clockwise, -1 - CCW */
> char last_stable;
> };
>
> -static int rotary_encoder_get_state(const struct rotary_encoder *encoder)
> +static unsigned rotary_encoder_get_state(const struct rotary_encoder
> *encoder)
> {
> - int a = !!gpio_get_value(encoder->gpio_a);
> - int b = !!gpio_get_value(encoder->gpio_b);
> + int i;
> + unsigned ret = 0;
>
> - a ^= encoder->inverted_a;
> - b ^= encoder->inverted_b;
> + for (i = 0; i < encoder->gpios->ndescs; ++i) {
> + int val = gpiod_get_value(encoder->gpios->desc[i]);
> + /* convert from gray encoding to normal */
> + if (ret & 1)
> + val = !val;
>
> - return ((a << 1) | b);
> + ret = ret << 1 | val;
> + }
> +
> + return ret & 3;
> }
>
> static void rotary_encoder_report_event(struct rotary_encoder *encoder)
> {
> if (encoder->relative_axis) {
> input_report_rel(encoder->input,
> - encoder->axis, encoder->dir ? -1 : 1);
> + encoder->axis, encoder->dir);
> } else {
> unsigned int pos = encoder->pos;
>
> - if (encoder->dir) {
> + if (encoder->dir < 0) {
> /* turning counter-clockwise */
> if (encoder->rollover)
> pos += encoder->steps;
> @@ -112,12 +113,12 @@ static irqreturn_t rotary_encoder_irq(int irq, void
> *dev_id)
> break;
>
> case 0x1:
> - case 0x2:
> + case 0x3:
> if (encoder->armed)
> - encoder->dir = state - 1;
> + encoder->dir = 2 - state;
> break;
>
> - case 0x3:
> + case 0x2:
> encoder->armed = true;
> break;
> }
> @@ -134,7 +135,7 @@ static irqreturn_t rotary_encoder_half_period_irq(int
> irq, void *dev_id)
>
> switch (state) {
> case 0x00:
> - case 0x03:
> + case 0x02:
> if (state != encoder->last_stable) {
> rotary_encoder_report_event(encoder);
> encoder->last_stable = state;
> @@ -142,8 +143,8 @@ static irqreturn_t rotary_encoder_half_period_irq(int
> irq, void *dev_id)
> break;
>
> case 0x01:
> - case 0x02:
> - encoder->dir = (encoder->last_stable + state) & 0x01;
> + case 0x03:
> + encoder->dir = ((encoder->last_stable - state + 1) % 4) - 1;
> break;
> }
>
> @@ -212,7 +213,6 @@ static int rotary_encoder_parse_dt(struct device *dev,
> const struct of_device_id *of_id =
> of_match_device(rotary_encoder_of_match, dev);
> struct device_node *np = dev->of_node;
> - enum of_gpio_flags flags;
> int error;
>
> if (!of_id || !np)
> @@ -221,12 +221,6 @@ static int rotary_encoder_parse_dt(struct device *dev,
> of_property_read_u32(np, "rotary-encoder,steps", &encoder->steps);
> of_property_read_u32(np, "linux,axis", &encoder->axis);
>
> - encoder->gpio_a = of_get_gpio_flags(np, 0, &flags);
> - encoder->inverted_a = flags & OF_GPIO_ACTIVE_LOW;
> -
> - encoder->gpio_b = of_get_gpio_flags(np, 1, &flags);
> - encoder->inverted_b = flags & OF_GPIO_ACTIVE_LOW;
> -
> encoder->relative_axis =
> of_property_read_bool(np, "rotary-encoder,relative-axis");
> encoder->rollover =
> @@ -273,11 +267,6 @@ static int rotary_encoder_parse_pdata(struct device *dev,
>
> encoder->steps = pdata->steps;
> encoder->axis = pdata->axis;
> - encoder->gpio_a = pdata->gpio_a;
> - encoder->gpio_b = pdata->gpio_b;
> - encoder->inverted_a = pdata->inverted_a;
> - encoder->inverted_b = pdata->inverted_b;
> - encoder->steps_per_period = pdata->steps_per_period;
> encoder->relative_axis = pdata->relative_axis;
> encoder->rollover = pdata->rollover;
>
> @@ -291,6 +280,7 @@ static int rotary_encoder_probe(struct platform_device
> *pdev)
> struct input_dev *input;
> irq_handler_t handler;
> int err;
> + unsigned int i;
>
> encoder = devm_kzalloc(dev, sizeof(struct rotary_encoder), GFP_KERNEL);
> input = devm_input_allocate_device(&pdev->dev);
> @@ -307,6 +297,16 @@ static int rotary_encoder_probe(struct platform_device
> *pdev)
> if (err < 0)
> return err;
>
> + encoder->gpios = devm_gpiod_get_array(dev, NULL, GPIOD_IN);
> + if (IS_ERR(encoder->gpios)) {
> + dev_err(dev, "unable to get gpios\n");
> + return PTR_ERR(encoder->gpios);
> + }
> + if (encoder->gpios->ndescs < 2) {
> + dev_err(dev, "not enough gpios found\n");
> + return -EINVAL;
> + }
> +
> encoder->input = input;
>
> input->name = pdev->name;
> @@ -322,25 +322,7 @@ static int rotary_encoder_probe(struct platform_device
> *pdev)
> encoder->axis, 0, encoder->steps, 0, 1);
> }
>
> - /* request the GPIOs */
> - err = devm_gpio_request_one(dev, encoder->gpio_a,
> - GPIOF_IN, dev_name(dev));
> - if (err) {
> - dev_err(dev, "unable to request GPIO %d\n", encoder->gpio_a);
> - return err;
> - }
> -
> - err = devm_gpio_request_one(dev, encoder->gpio_b,
> - GPIOF_IN, dev_name(dev));
> - if (err) {
> - dev_err(dev, "unable to request GPIO %d\n", encoder->gpio_b);
> - return err;
> - }
> -
> - encoder->irq_a = gpio_to_irq(encoder->gpio_a);
> - encoder->irq_b = gpio_to_irq(encoder->gpio_b);
> -
> - switch (encoder->steps_per_period) {
> + switch (encoder->steps_per_period >> (encoder->gpios->ndescs - 2)) {
> case 4:
> handler = &rotary_encoder_quarter_period_irq;
> encoder->last_stable = rotary_encoder_get_state(encoder);
> @@ -358,20 +340,23 @@ static int rotary_encoder_probe(struct platform_device
> *pdev)
> return -EINVAL;
> }
>
> - err = devm_request_irq(dev, encoder->irq_a, handler,
> - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> - DRV_NAME, encoder);
> - if (err) {
> - dev_err(dev, "unable to request IRQ %d\n", encoder->irq_a);
> - return err;
> - }
> + encoder->irq =
> + devm_kzalloc(dev,
> + sizeof(*encoder->irq) * encoder->gpios->ndescs,
> + GFP_KERNEL);
> + if (!encoder->irq)
> + return -ENOMEM;
>
> - err = devm_request_irq(dev, encoder->irq_b, handler,
> - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
> - DRV_NAME, encoder);
> - if (err) {
> - dev_err(dev, "unable to request IRQ %d\n", encoder->irq_b);
> - return err;
> + for (i = 0; i < encoder->gpios->ndescs; ++i) {
> + encoder->irq[i] = gpiod_to_irq(encoder->gpios->desc[i]);
> + err = devm_request_irq(dev, encoder->irq[i], handler,
> + IRQF_TRIGGER_RISING |
> IRQF_TRIGGER_FALLING,
> + DRV_NAME, encoder);
> + if (err) {
> + dev_err(dev, "unable to request IRQ %d (gpio#%d)\n",
> + encoder->irq[i], i);
> + return err;
> + }
> }
>
> err = input_register_device(input);
> @@ -399,8 +384,9 @@ static int rotary_encoder_suspend(struct device *dev)
> struct rotary_encoder *encoder = dev_get_drvdata(dev);
>
> if (device_may_wakeup(dev)) {
> - enable_irq_wake(encoder->irq_a);
> - enable_irq_wake(encoder->irq_b);
> + unsigned int i;
> + for (i = 0; i < encoder->gpios->ndescs; ++i)
> + enable_irq_wake(encoder->irq[i]);
> }
>
> return 0;
> @@ -411,8 +397,9 @@ static int rotary_encoder_resume(struct device *dev)
> struct rotary_encoder *encoder = dev_get_drvdata(dev);
>
> if (device_may_wakeup(dev)) {
> - disable_irq_wake(encoder->irq_a);
> - disable_irq_wake(encoder->irq_b);
> + unsigned int i;
> + for (i = 0; i < encoder->gpios->ndescs; ++i)
> + disable_irq_wake(encoder->irq[i]);
> }
>
> return 0;
> diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h
> index fe3dc64e5aeb..4536c813a1e9 100644
> --- a/include/linux/rotary_encoder.h
> +++ b/include/linux/rotary_encoder.h
> @@ -4,10 +4,6 @@
> struct rotary_encoder_platform_data {
> unsigned int steps;
> unsigned int axis;
> - unsigned int gpio_a;
> - unsigned int gpio_b;
> - unsigned int inverted_a;
> - unsigned int inverted_b;
> unsigned int steps_per_period;
> bool relative_axis;
> bool rollover;
> --
> 2.6.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
