On Sun, Dec 20, 2015 at 01:49:25PM +0100, Pavel Rojtberg wrote:
> 2015-12-20 8:55 GMT+01:00 Dmitry Torokhov <dmitry.torok...@gmail.com>:
> > On Sat, Dec 19, 2015 at 10:17:09PM +0100, Clement Calmels wrote:
> >> On Wed, 16 Dec 2015 14:44:08 -0800
> >> Dmitry Torokhov <dmitry.torok...@gmail.com> wrote:
> >>
> >> > When lighting up the segment identifying wireless controller, Instead
> >> > of sending command directly to the controller, let's do it via LED
> >> > API (usinf led_set_brightness) so that LED object state is in sync
> >> > with controller state and we'll light up the correct segment on
> >> > resume as well.
> >> >
> >> > Signed-off-by: Dmitry Torokhov <dmitry.torok...@gmail.com>
> >> > ---
> >> >
> >> > I do not have the hardware so please try this out.
> >> >
> >> > drivers/input/joystick/xpad.c | 2 +-
> >> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >> >
> >> > diff --git a/drivers/input/joystick/xpad.c
> >> > b/drivers/input/joystick/xpad.c index 36328b3..00a766b 100644
> >> > --- a/drivers/input/joystick/xpad.c
> >> > +++ b/drivers/input/joystick/xpad.c
> >> > @@ -1118,7 +1118,7 @@ static void xpad_send_led_command(struct
> >> > usb_xpad *xpad, int command) */
> >> > static void xpad_identify_controller(struct usb_xpad *xpad)
> >> > {
> >> > - xpad_send_led_command(xpad, (xpad->pad_nr % 4) + 2);
> >> > + led_set_brightness(&xpad->led->led_cdev, (xpad->pad_nr % 4)
> >> > + 2); }
> >> >
> >> > static void xpad_led_set(struct led_classdev *led_cdev,
> >>
> >> Hi Dimitri,
> >
> > Hi Clement,
> >
> >>
> >> My hardware: two wireless xpad 360 using a single usb receiver.
> >>
> >> Power on the first gamepad => light the "1" led.
> >> Power on the second gamepad => light the "2" led.
> >>
> >> Suspend the PC (systemctl suspend): the two gamepads are "disconnected"
> >> => blinking circle.
> >>
> >> Resume the PC, the two gamepads keep blinking but are working (tested
> >> with jstest).
> >>
> >> Power off and on the gamepad => still blinking.
> >> Reload (rmmod/modprobe) the xpad module => still blinking.
> >>
> >> That said, without your patch, the behavior is exactly the same.
> >> It seems that the suspend/resume broke the led feature. Even using
> >> the /sys/class/leds/xpad0/brigthness sysfs entry does not work.
> >>
> >
> > OK, so the patch does work (the device is still correctly identified),
> > but resume requires additional patches. Could you try 'xpad' branch of
> > my tree on kernel.org [1] and let me know if it works for you?
> at least on my machine your follow up patch was also required which I merged
> at:
> https://github.com/paroj/xpad/tree/dtor
>
> with this patch the controllers still continue blinking after resume,
> however the URB
> will still work so they respond to subsequent LED commands triggered
> via sysfs (or if they are powered off and on).
>
> I also verified that a LED command is triggered upon resume - however
> the controller ignores that.
> Maybe it is sent too early/ in the wrong order.
I wonder if below helps this.
--
Dmitry
Input: xpad - try waiting for output URB to complete
From: Dmitry Torokhov <dmitry.torok...@gmail.com>
Signed-off-by: Dmitry Torokhov <dmitry.torok...@gmail.com>
---
drivers/input/joystick/xpad.c | 41 +++++++++++++++++++++++++++++++++--------
1 file changed, 33 insertions(+), 8 deletions(-)
diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c
index 30b2fa8..dd7a2af 100644
--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -346,9 +346,10 @@ struct usb_xpad {
dma_addr_t idata_dma;
struct urb *irq_out; /* urb for interrupt out report */
+ struct usb_anchor irq_out_anchor;
bool irq_out_active; /* we must not use an active URB */
- unsigned char *odata; /* output data */
u8 odata_serial; /* serial number for xbox one protocol
*/
+ unsigned char *odata; /* output data */
dma_addr_t odata_dma;
spinlock_t odata_lock;
@@ -764,11 +765,13 @@ static int xpad_try_sending_next_out_packet(struct
usb_xpad *xpad)
int error;
if (!xpad->irq_out_active && xpad_prepare_next_out_packet(xpad)) {
+ usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
error = usb_submit_urb(xpad->irq_out, GFP_ATOMIC);
if (error) {
dev_err(&xpad->intf->dev,
"%s - usb_submit_urb failed with result %d\n",
__func__, error);
+ usb_unanchor_urb(xpad->irq_out);
return -EIO;
}
@@ -811,11 +814,13 @@ static void xpad_irq_out(struct urb *urb)
}
if (xpad->irq_out_active) {
+ usb_anchor_urb(urb, &xpad->irq_out_anchor);
error = usb_submit_urb(urb, GFP_ATOMIC);
if (error) {
dev_err(dev,
"%s - usb_submit_urb failed with result %d\n",
__func__, error);
+ usb_unanchor_urb(urb);
xpad->irq_out_active = false;
}
}
@@ -832,6 +837,8 @@ static int xpad_init_output(struct usb_interface *intf,
struct usb_xpad *xpad)
if (xpad->xtype == XTYPE_UNKNOWN)
return 0;
+ init_usb_anchor(&xpad->irq_out_anchor);
+
xpad->odata = usb_alloc_coherent(xpad->udev, XPAD_PKT_LEN,
GFP_KERNEL, &xpad->odata_dma);
if (!xpad->odata) {
@@ -864,6 +871,18 @@ static int xpad_init_output(struct usb_interface *intf,
struct usb_xpad *xpad)
fail1: return error;
}
+static void xpad_stop_output(struct usb_xpad *xpad)
+{
+ if (xpad->xtype != XTYPE_UNKNOWN) {
+ if (!usb_wait_anchor_empty_timeout(&xpad->irq_out_anchor,
+ 5000)) {
+ dev_warn(&xpad->intf->dev,
+ "timed out waiting for output URB to complete,
killing\n");
+ usb_kill_anchored_urbs(&xpad->irq_out_anchor);
+ }
+ }
+}
+
static void xpad_deinit_output(struct usb_xpad *xpad)
{
if (xpad->xtype != XTYPE_UNKNOWN) {
@@ -924,7 +943,15 @@ static int xpad_start_xbox_one(struct usb_xpad *xpad)
packet->len = 5;
packet->pending = true;
- retval = usb_submit_urb(xpad->irq_out, GFP_KERNEL) ? -EIO : 0;
+ usb_anchor_urb(xpad->irq_out, &xpad->irq_out_anchor);
+ retval = usb_submit_urb(xpad->irq_out, GFP_KERNEL);
+ if (retval) {
+ dev_err(&xpad->intf->dev,
+ "%s - usb_submit_urb failed with result %d\n",
+ __func__, retval);
+ usb_unanchor_urb(xpad->irq_out);
+ retval = -EIO;
+ }
spin_unlock_irqrestore(&xpad->odata_lock, flags);
@@ -1514,15 +1541,14 @@ static void xpad_disconnect(struct usb_interface *intf)
* Now that both input device and LED device are gone we can
* stop output URB.
*/
- if (xpad->xtype == XTYPE_XBOX360W)
- usb_kill_urb(xpad->irq_out);
+ xpad_stop_output(xpad);
+
+ xpad_deinit_output(xpad);
usb_free_urb(xpad->irq_in);
usb_free_coherent(xpad->udev, XPAD_PKT_LEN,
xpad->idata, xpad->idata_dma);
- xpad_deinit_output(xpad);
-
kfree(xpad);
usb_set_intfdata(intf, NULL);
@@ -1548,8 +1574,7 @@ static int xpad_suspend(struct usb_interface *intf,
pm_message_t message)
mutex_unlock(&input->mutex);
}
- if (xpad->xtype != XTYPE_UNKNOWN)
- usb_kill_urb(xpad->irq_out);
+ xpad_stop_output(xpad);
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe linux-input" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
