Hello,
On Fri, Apr 04, 2025 at 11:53:00AM +0300, Jarkko Sakkinen wrote:
> On Fri, Apr 04, 2025 at 10:23:14AM +0200, Michal Suchanek wrote:
> > With some Infineon chips the timeouts in tpm_tis_send_data (both B and
> > C) can reach up to about 2250 ms.
> >
> > Timeout C is retried since
> > commit de9e33df7762 ("tpm, tpm_tis: Workaround failed command reception on
> > Infineon devices")
> >
> > Timeout B still needs to be extended.
> >
> > The problem is most commonly encountered with context related operation
> > such as load context/save context. These are issued directly by the
> > kernel, and there is no retry logic for them.
> >
> > When a filesystem is set up to use the TPM for unlocking the boot fails,
> > and restarting the userspace service is ineffective. This is likely
> > because ignoring a load context/save context result puts the real TPM
> > state and the TPM state expected by the kernel out of sync.
> >
> > Chips known to be affected:
> > tpm_tis IFX1522:00: 2.0 TPM (device-id 0x1D, rev-id 54)
> > Description: SLB9672
> > Firmware Revision: 15.22
> >
> > tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1B, rev-id 22)
> > Firmware Revision: 7.83
> >
> > tpm_tis MSFT0101:00: 2.0 TPM (device-id 0x1A, rev-id 16)
> > Firmware Revision: 5.63
> >
> > Link:
> > https://lore.kernel.org/linux-integrity/z5pi07m0muapy...@kitsune.suse.cz/
> > Signed-off-by: Michal Suchanek <msucha...@suse.de>
> > ---
> > v2: Only extend timeout B
> > v3: Update commit message
> > ---
> > drivers/char/tpm/tpm_tis_core.h | 2 +-
> > include/linux/tpm.h | 2 +-
> > 2 files changed, 2 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/char/tpm/tpm_tis_core.h
> > b/drivers/char/tpm/tpm_tis_core.h
> > index 970d02c337c7..6c3aa480396b 100644
> > --- a/drivers/char/tpm/tpm_tis_core.h
> > +++ b/drivers/char/tpm/tpm_tis_core.h
> > @@ -54,7 +54,7 @@ enum tis_int_flags {
> > enum tis_defaults {
> > TIS_MEM_LEN = 0x5000,
> > TIS_SHORT_TIMEOUT = 750, /* ms */
> > - TIS_LONG_TIMEOUT = 2000, /* 2 sec */
> > + TIS_LONG_TIMEOUT = 4000, /* 4 secs */
> > TIS_TIMEOUT_MIN_ATML = 14700, /* usecs */
> > TIS_TIMEOUT_MAX_ATML = 15000, /* usecs */
> > };
> > diff --git a/include/linux/tpm.h b/include/linux/tpm.h
> > index 6c3125300c00..3db0b6a87d45 100644
> > --- a/include/linux/tpm.h
> > +++ b/include/linux/tpm.h
> > @@ -224,7 +224,7 @@ enum tpm2_const {
> >
> > enum tpm2_timeouts {
> > TPM2_TIMEOUT_A = 750,
> > - TPM2_TIMEOUT_B = 2000,
> > + TPM2_TIMEOUT_B = 4000,
> > TPM2_TIMEOUT_C = 200,
> > TPM2_TIMEOUT_D = 30,
> > TPM2_DURATION_SHORT = 20,
> > --
> > 2.47.1
> >
> >
>
> Cc: sta...@vger.kernel.org # v6.1+
>
> Probably best that I'll piggyback a patch set for stable with the two
> fixes, in order to cause least noise. I need to do this *after* an
> ack'd PR to -rc2.
While there is talk about stable this does not seem to be applied
anywhere I could find. Is that expected?
Thanks
Michal
>
> Reviewed-by: Jarkko Sakkinen <jar...@kernel.org>
>
> BR, Jarkko
