On Sat, 3 Feb 2001 17:33:14 -0000, you wrote:
> Dag wrote:
>
> >Where can I look at this icp.c? I cannot remember writing such
> >a thing ;-) I wrote the Winbond driver which is used in the
> >Netwinder, but other than that, I haven't done much with the
> >ARM support.
>
> As it's GPL'd, I've included the driver source below. As you can see, you're
> credited with writing this driver, and it's got yopy specific gpio stuff in
> there, and some kind of FIR support, even though the comment at the top says
> otherwise..
Wow, I've must have been pretty drunk back then ;-) Well,
this driver looks to be a mod of the irport driver which I
once wrote, but I haven't written this one, so I should not
have been tagged as the author. Sources should probably say: Based
on irport.c by Dag Brattli or something.
> >I tried once to get in touch with the Yopy developers, but gave
> >up after sending a lot of emails, and trying to get other
> >companies to open up some doors for me. I really wanted to help
> >out with IrDA support for the Yopy, but I never got any answer
> >back.
>
> Dag, The Linux iPAQ people at www.handhelds.org (particularly me) would be
> delighted if you could spare some time to help out on the iPAQ irda driver.
> At the moment we're all using the sa1100_ir driver from Russel King, which
> has no FIR support currently, but some of the basic framework in place. I
> had a go at getting FIR speeds going by adding code to this driver, but (due
> to laptop IR hardware problems - doesn't receive at FIR speeds) never got
> too far.. then I accidently overwrote all of my driver changes when
> untarring a new kernel, and kind of lost the urge to do it all over again.
> I've purchased a irda-usb dongle now, so should actually be able to do some
> more testing. If you feel like having a crack at this one, I'll do
> everything I can to help out.
I don't have access to an iPAQ, and it's hard enough to write
drivers when you _have_ the hardware ;-) But I'll have the
iPAQ in mind the next time I'm allowed to buy a new gadget ;-)
>
> Many Thanks,
>
> Jim
>
-- Dag
----
Dag Brattli <[EMAIL PROTECTED]>
My homepage http://www.brattli.net/dag/
Try Linux-IrDA: http://irda.sourceforge.net/
Try Pygmy: http://pygmy.sourceforge.net/
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
