> Look down in the log :
> ----------------------------------
> 01:38:33.392600 i:cmd > ca=30 pf=1 nr=3 ns=4 LM slsap=17 dlsap=39 TTP credits=0
>
> OBEX CONNECT len=7 ver=1.1 flags=0 mtu=1024 (12)
> 01:38:33.408341 i:rsp < ca=30 pf=1 nr=5 ns=3 LM slsap=39 dlsap=17 TTP credits=1
>
> OBEX SUCCESS len=7 ver=1.1 flags=0 mtu=1024 (12)
> 01:38:33.416529 i:cmd > ca=30 pf=1 nr=4 ns=5 LM slsap=17 dlsap=39 TTP credits=1
>
> OBEX GET final=1 len=3 (8)
>
> 01:38:33.436387 i:rsp < ca=30 pf=1 nr=6 ns=4 LM slsap=39 dlsap=17 TTP credits=1
>
> OBEX CONTINUE (1029)
> ^^^^^^^^^^^^^^^^^^^^
> -----------------------------------
> As per Obex spec v1.2, chapter 3.2, page 21 and 22, this
> should be "OBEX CONTINUE final=1 (1029)".
> You are sending 0x10, while you should be sending 0x90. You
> should send 0x10 only in response to 0x03 (GET without final bit) and
> always send 0x90 in answer to a 0x83 (GET + final).
>
> That's it...
Yes. You are right. I'll have a look at this soon!
/Pontus
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
