> Here are is a patch to fix the main bugs in
> drivers/net/irda/nsc-ircc.c from Linux 2.4.3.
I tried it on my system, with the following results:
[root@bright findchip]# ./findchip -v
Found NSC PC87338 Controller at 0x398, DevID=0x0b, Rev. 2
SIR Base 0x2f8, FIR Base 0x2f8
IRQ = 3, DMA = 0
Enabled: yes, Suspended: no
UART compatible: yes
Half duplex delay = 0 us
[root@bright findchip]# modprobe nsc-ircc io=0x398 irq=3 dma=0
/lib/modules/2.4.3/kernel/drivers/net/irda/nsc-ircc.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.4.3/kernel/drivers/net/irda/nsc-ircc.o: insmod
/lib/modules/2.4.3/kernel/drivers/net/irda/nsc-ircc.o failed
/lib/modules/2.4.3/kernel/drivers/net/irda/nsc-ircc.o: insmod nsc-ircc
failed
I tried it again using the other port number, and still no dice:
[root@bright findchip]# modprobe nsc-ircc io=0x2f8 irq=3 dma=0
/lib/modules/2.4.3/kernel/drivers/net/irda/nsc-ircc.o: init_module: No
such device
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters
/lib/modules/2.4.3/kernel/drivers/net/irda/nsc-ircc.o: insmod
/lib/modules/2.4.3/kernel/drivers/net/irda/nsc-ircc.o failed
/lib/modules/2.4.3/kernel/drivers/net/irda/nsc-ircc.o: insmod nsc-ircc
failed
I'm using a Sony VAIO PCG-F540 with kernel 2.4.3. The IR port works
fine in Windows, and I can do OBEX between Windows and my Palm IIIc's
notepad.
- Jason
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
