Hi Roberto, You can get the motherboard dongles from actisys (www.actisys.com). Their 210L works just fine with just about any motherboard with the IR header. A few caveats: 1. This thing is pricey - about $40 US. 2. It only supports SIR (115.2K) speeds. Actisys at one time had a motherboard dongle that supported FIR, but they withdrew it after finding too many motherboard incompatibilities. 3. Some motherboards have differing pinouts on the header, so it may be necessary to swap the connectors on the dongle. This is not difficult. I haven't tested that motherboard, but I do have IR working on an Abit BE6-II motherboard, which should be fairly similar. P. on Sweetmorn, the 40th of Confusion, [EMAIL PROTECTED] spake: > Message: 1 > Date: Tue, 3 Jul 2001 14:56:41 -0200 (EDT) > From: Roberto Jung Drebes <[EMAIL PROTECTED]> > To: [EMAIL PROTECTED] > Subject: [Linux-IrDA]Motherboard and Header > Reply-To: [EMAIL PROTECTED] > > > Hi there, > > Does anyone know if the IR in the Abit KT7A motherboard is supported under > Linux-IrDA? The motherboard page does not say what IR chip it uses. Also, > where can I buy online a IrDA header? > > TIA, > -- Philip J. Hollenback [EMAIL PROTECTED] http://www.hollenback.net _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
