Markus Biermaier wrote :
>
> With my new 2.4.12 kernel I have to load almost all modules by hand.
You forgot to upgrade modutils.
> Using the old configuration with the 2.2.18 kernel, the string
> "OBEX" appears in the dump of the discovery.
> This string is missing with the new configuration:
Hum... Is the Obex stuff running ? The missing "OBEX" stuff is
the exact reason why the Palm won't attempt to connect.
I have to conjecture that somehow there is an endianess
problem with IRLMP_HINTS_SET. Could you check what's happening in
there (I don't have a MAC) ?
> wvlan_cs.c v1.0.4
That's antiquated. It's not even worth hacking it.
> modprobe wavelan
Don't do that. Wrong driver. Read the Howto.
> Oct 30 15:39:07 linuxpb kernel: PCI: Enabling device 00:13.0 (0000 -> 0002)
> Oct 30 15:39:07 linuxpb kernel: Yenta IRQ list 0000, PCI irq22
> Oct 30 15:39:07 linuxpb kernel: Socket status: 30000410
[...]
> Oct 30 15:42:43 linuxpb rcpcmcia: /sbin/insmod
>/lib/modules/2.4.12/kernel/drivers/pcmcia/i82365.o do_scan=0 irq_mode=0
> Oct 30 15:42:43 linuxpb cardmgr[882]: starting, version is 3.1.22
> Oct 30 15:42:43 linuxpb cardmgr[882]: watching 1 sockets
> Oct 30 15:42:43 linuxpb cardmgr[882]: initializing socket 0
Your Pcmcia config is totally screw-up, because you load two
different Pcmcia bridge drivers. Please reinstall a recent Pcmcia
package, fix your scripts and don't load modules by hand.
Regards,
Jean
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
