> Seems I forgot to ask the obvious: have you compiled the IrDA stack with
> CONFIG_IRDA_FAST_RR enabled? Doesn't look so. With this option the stack
> would send the rr:cmd (which grants another media access time) to the
> phone and you should be happy. It's an IrDA option to be enabled during
> the kernel configuration.
Du-oh... When I upgraded to 2.4.12 I forgot to re-set FAST_RR.
With FAST_RR set, everything works a treat -- I get 3.6 kB/s,
just as with the RS232 cable.
Thanks very much for your help tracking this down.
> AFAICS there is no indication of any packet loss in your dump. If this was
> obtained without my patch it would demonstrate my concern about mtt=0 was
> not the cause for your problem.
What does packet loss in an irdadump output look like? I'll try
it with and without max_tx_turn_time set to 10ms and see if it
makes any difference.
> PS: Ian, I've just realized all the CC's to you got just bounced - sorry.
> Seems your ISP doesn't allow you to receive mail from dialup-mailer ;-)
> I hope reading on linux-irda is ok for you.
Reading the mail list is just fine... Apologies for the bounces.
Thanks for your help,
Ian
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
