hi i have linux rh-7.0 with kernel 2.4.16 I have installed KC-180-usb-irda and linux automatically identified it and insmod the appropriate modules, telling me to use /dev/usb/ttyUSB0. i tried to open minicom with different baud rates on /dev/usb/ttyUSB0 but got no date in or out. ( note that without the irda device, I couldn't have opened /dev/usb/ttyUSB0, so that is the right device).
after I upgraded to 2.4.17pre8, i could see data incoming on /dev/usb/ttyUSB0 whenever I press hotsync on my palm III. so i ran slattach on that device and echo 1 > /proc/sys/net/irda/discovery. irdadump showed me the discovery frames I sent to the palm, but would not show me the frames i got from the palm ( though the discovery cycle stoppped whenever i pressed hotsync). note that tcpdump on irda0 gave the same as irdadump. can anyone help ? thanks erez. _______________________________________________ Linux-IrDA mailing list - [EMAIL PROTECTED] http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
