Hi all,
my setup :
1. Dell CPtC400, RedHat 6.0, 2.2.13, patch-2.2.13-irda9,
irda-utils-0.9.5
2. Palm V with OS 3.3
goal : sync over IR, either with pilot-xfer or jpilot (preferred).
the same sync over a normal serial port works fine.
Problem : everything I try get blocked by "port busy" kind of errors
when I start the sync tools.
Details :
- in the PC BIOS : IR enabled / slow mode / port com2 / irq3.
- Windows 98 find it and can communicate with the Palm.
- Beam receive disabled on the Palm preferences.
- same results when my PCMCIA card is out of the slot
# irattach /dev/ttyS1
Dec 8 19:11:40 boy irattach: Serial connection established.
Dec 8 19:11:40 boy kernel: IrDA (tm) Protocols for Linux-2.2 (Dag
Brattli)
Dec 8 19:11:40 boy kernel: IrDA: Registered device irda0
Dec 8 19:11:41 boy irattach: executing: 'echo boy >
/proc/sys/net/irda/devname'
Dec 8 19:11:41 boy irattach: Using device: irda0
# irmanager -d 1
Dec 8 19:12:14 boy irmanager: executing: 'echo 1 >
/proc/sys/net/irda/discovery'
Dec 8 19:12:14 boy irmanager: executing: 'echo boy >
/proc/sys/net/irda/devname'
# lsmod
Module Size Used by
irtty 4540 2 (autoclean)
irda 66593 2 (autoclean) [irtty]
3c589_cs 8328 1
nm256 69504 1
sound 57228 0 [nm256]
soundcore 2372 6 [sound]
ds 6504 2 [3c589_cs]
i82365 29908 2
pcmcia_core 43904 0 [3c589_cs ds i82365]
user% jpilot --> sync
****************************************
Syncing on device /dev/ttyS1
Press the HotSync button now
****************************************
pi_bind Device or resource busy <====== that's not
OK...
Check your serial port and settings
user% export PILOTPORT=/dev/ttyS1
user% export PILOTRATE=9600 <====== Pilot has same
speed setup in pref
user% pilot-xfer -b /tmp
Unable to bind to port '/dev/ttyS1' <====== same problem as
with jpilot
# irdadump (extract)
18:19:47.957418 xid:cmd ffffffff < 4125892d S=6 s=1 (14)
18:19:47.957552 xid:rsp 00f3169e > 4125892d S=6 s=1 boy hint=0400 [
Computer ] (19)
18:19:48.037485 xid:cmd ffffffff < 4125892d S=6 s=2 (14)
18:19:48.177360 xid:cmd ffffffff < 4125892d S=6 s=3 (14)
18:19:48.267744 xid:cmd ffffffff < 4125892d S=6 s=4 (14)
18:19:48.357357 xid:cmd ffffffff < 4125892d S=6 s=5 (14)
18:19:48.457515 xid:cmd ffffffff < 4125892d S=6 s=* IrCOMM hint=8204 [
PDA/Palmtop IrCOMM ] (23)
18:19:48.507557 snrm:cmd ca=fe pf=1 00f3169e < 4125892d new-ca=fa (32)
18:19:48.507694 ua:rsp ca=fa pf=1 00f3169e > 4125892d (31)
18:19:49.077432 rr:cmd < ca=fa pf=1 nr=0 (2)
18:19:49.077561 rr:rsp > ca=fa pf=1 nr=0 (2)
18:19:49.097447 i:cmd < ca=fa pf=1 nr=0 ns=0 LM slsap=01 dlsap=00
CONN_CMD (6)
18:19:49.097591 i:rsp > ca=fa pf=1 nr=1 ns=0 LM slsap=00 dlsap=01
CONN_RSP (6)
18:19:49.117621 i:cmd < ca=fa pf=1 nr=1 ns=1 LM slsap=01 dlsap=00
GET_VALUE_BY_CLASS:
"IrDA:IrCOMM" "IrDA:TinyTP:LsapSel" (37)
18:19:49.117809 i:rsp > ca=fa pf=1 nr=2 ns=1 LM slsap=00 dlsap=01
GET_VALUE_BY_CLASS: No such class (11)
My conclusion : something must be wrong somewhere, and I would
appreciate your help.
Charles
--
---
Charles Bueche <[EMAIL PROTECTED]>
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
