On Sat, Dec 18, 1999 at 02:39:24PM +0100, Dag Brattli wrote:
Hello,
> Always tell which kernel version and patch level (if any) you are
> using. How do you start irattach? Do you use irmanager? What does irdadump
> say? If you are using an old kernel, then you might want to increase the
> /proc/sys/net/irda/slot_timeout to 90. If so then you should probably
> consider upgrading as well.
Because I didn't have an old kernel I didn't tried to increase the slot timeout
immediately. But after hours of different test I tried to set up the timeout
to 90, and then it works...
Here's my configuration:
* irda-common/irda-tools : 0.9.5-1.1 (debian potato)
* kernel 2.2.14-pre14
I tried with a slot timeout of 89 and it does not work. So the smaller value
is 90.
The weird thing is that with the same phone from a friend it works with a
80 ms as timeout...
Anyway, a big thanks for your help.
Regards
--
Alexis Domjan <[EMAIL PROTECTED]>
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
