Hello
I'm trying to use the Tekram IR-210B dongle on /dev/ttyS0 to connect to
an Ericsson SH888 cellular phone. (I want to use it send SMS messages).
I have currently installed kernel 2.4.0-test8 but plan to use 2.2.17.
Sadly I cannot get minicom to use the /dev/ttyS0 or /dev/ircomm0 for
communication with the phone. Any hints? I attached much debug information
below!
bye,
-christian-
With 2.4.0-test8 I load the following modules:
irtty 7600 2
tekram 2224 1
irda 145904 2 [irtty tekram]
# irattch /dev/ttyS0 -d tekram
# tail /var/log/syslog
Sep 27 12:20:29 xeniac kernel: IrDA: Registered device irda
Sep 27 12:20:30 xeniac kernel: irtty_net_open()
Sep 27 12:20:30 xeniac kernel: irlap_change_speed(), setting speed to 9600
Sep 27 12:20:30 xeniac irattach: Starting device irda
Sep 27 12:20:30 xeniac irattach: executing: 'echo xeniac > /proc/sys/net/irda/devname'
Sep 27 12:20:30 xeniac kernel: tekram_reset(), busy!
Sep 27 12:20:30 xeniac last message repeated 3 times
Sep 27 12:20:30 xeniac kernel: irlap_state_ndm(), media busy!
# irdadump
10:22:21.699722 xid:cmd a0a4cb79 > ffffffff S=6 s=0 (14)
10:22:21.789705 xid:cmd a0a4cb79 > ffffffff S=6 s=1 (14)
10:22:21.869697 xid:rsp a0a4cb79 < 0a66b9a9 S=6 s=1 SH 888 hint=9104 [ PnP Modem
IrCOMM ] (23)
10:22:21.879718 xid:cmd a0a4cb79 > ffffffff S=6 s=2 (14)
10:22:21.969705 xid:cmd a0a4cb79 > ffffffff S=6 s=3 (14)
10:22:22.059705 xid:cmd a0a4cb79 > ffffffff S=6 s=4 (14)
10:22:22.149704 xid:cmd a0a4cb79 > ffffffff S=6 s=5 (14)
10:22:22.239706 xid:cmd a0a4cb79 > ffffffff S=6 s=* xeniac hint=0400 [ Computer ] (22)
--
Christian Hammers WESTEND GmbH - Aachen und Dueren Tel 0241/701333-0
[EMAIL PROTECTED] Internet & Security for Professionals Fax 0241/911879
WESTEND ist CISCO Systems Partner - Premium Certified
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www4.pasta.cs.UiT.No/mailman/listinfo/linux-irda
