> 
> Message: 1
> From: Paolo Arcagni <[EMAIL PROTECTED]>
> To: [EMAIL PROTECTED]
> Date: 04 Nov 2000 13:06:54 -0100
> Subject: [Linux-IrDA]Linux-IrDA and Compaq Armada E500
> Reply-To: [EMAIL PROTECTED]
> 
> Hi all.
> 
> I'm trying to configure the infrared port of my Compaq Armada E500
> LapTop to use the irtty and my 7110 Nokia Phone for a ppp connection.
> 
> I have been reading some HOWTO and other things and I am finally
> thinking to be in trouble with the IrDA device Itself (I can't see the
> "Serial connection established" after the 
> 
> insmod irda
> insmod irtty
> 
> irmanager -d 1 with irattach /dev/ttyS2
> 
> )...
> 
> The IR device works well under M$ windoze 2000.
> 
> Anyone can help with this notebook?
> thanks
> 
> Paolo
> [EMAIL PROTECTED]

Hi 
I am using redhat linux 6.2 with a nokia 7110, to get irda working I had to
upgrade my kernal to ver 2.2.16. I have included a list of instructions I have
used to get IRDA working.


        Configuring Nokia 7110 for ircomm

1) Check to see if you have irda utils (check in /etc/irda)
2) Compile the kernel. You need (m) IrDA Subsystem
(m) for IrCOMM, (X) IrDA protocol options, (X) Fast RRs, (m) IrTTY), (M)
IrPORT). This is for kernel versions 2.2.15/2.2.16
3) Edit the script file /etc/irda/drivers, uncomment the irattach
/dev/ttyS2 (this will depend on which serial port your irda port is (check
with 'dmesg'). Comment out any other irattach drivers). 4) enter the following
into /etc/config.modules,      alias tty-ldisc-11 irtty     alias
char-major-161 ircomm-tty 5)Make the following devices ,     mknod
/dev/ircomm0 c 161 0    mknod /dev/ircomm1 c 161 1
  mknod /dev/irlpt0 c 161 16
  mknod /dev/irlpt1 c 161 17
6)Next make a link between /dev/ircomm0 and /dev/modem (if you wish to use the phone 
as a standard modem).
7)I also had problems with pcmcia using the irq3 (check file
etc/pcmcia/config.opts).
8) restart your computer.
9) start irmanager (irmanager -d 1), check for errors in your /var/messages
file.
10) start irdadump. switch on you phones irda port and check to see if
you have contact. You will see the phone annouce itself. 
11) All you then have
to do is to use you favourite dialup program. I have used kppp and wvdial with
success..



Alan 

_______________________________________________
Linux-IrDA mailing list  -  [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda

Reply via email to