Hi!
There are two possibilities to answer my question:
1) tell me how to rebuild the irda-modules easily,
if I stand in /usr/src/linux/net/irda/ircomm.
Then I could (perhaps) find it out by myself...
2) this is my problem:
I have a handy, which has been recognized in /proc/net/irda/discovery
Then I start e.g. kermit and type:
SET LINE /dev/ircomm0
SET SPEED 9600
SET MODEM TYPE UNKNOWN
DIAL 12345678
Then I got in /var/log/debug:
ircomm_tty_attach_cable()
ircomm_tty_ias_register()
and that's all ;(
I've tried this also with a Siemens S35 which dials at least
(I have no hint, what to do after dialing, but that's not the
problem at the moment:)
Any hints? Thanks a lot!
flo
--------------------
Florian Zimmermann
<http://www.0x17.de>
[EMAIL PROTECTED]
-
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
