Hi all,
I'm new at this mailinglist...
Hello to all :)
sorry for the length of this mail...
I've got an Gericom laptop, with smc chipset.
I tried to run irattach on /dev/ttySx but it only works using /dev/ttyS0,
but thats my serial port.
On /dev/ttyS0 irdadump doesn"t recognize any other device... I tried it
with my Palm III. In spite of this irdadump shows some infos:
----------------------------------------------------------------------
12:58:20.184089 xid:cmd 0029217c > ffffffff S=6 s=0 (14)
12:58:20.274081 xid:cmd 0029217c > ffffffff S=6 s=1 (14)
12:58:20.364081 xid:cmd 0029217c > ffffffff S=6 s=2 (14)
12:58:20.454079 xid:cmd 0029217c > ffffffff S=6 s=3 (14)
12:58:20.544083 xid:cmd 0029217c > ffffffff S=6 s=4 (14)
12:58:20.634079 xid:cmd 0029217c > ffffffff S=6 s=5 (14)
12:58:20.724081 xid:cmd 0029217c > ffffffff S=6 s=* Shodan hint=0400 [
Computer ] (22)
----------------------------------------------------------------------
Irdadump doesn't show any other ir-device in range of my lap...
When I try to start irattach to anorther devices in /var/log/messages
the following appears:
Nov 20 13:45:55 Shodan irattach: tcsetattr: Input/output error
Okey now i tried to use the smc-ircc modul, but that doesn't work too.
When I modprobe smc-ircc, the kernel shows:
----------------------------------------------------------
Nov 20 13:51:35 Shodan kernel: ircc_init
Nov 20 13:51:35 Shodan kernel: ircc_probe_69()
Nov 20 13:51:35 Shodan kernel: ircc_probe_69(), devid=0x29
Nov 20 13:51:35 Shodan kernel: ircc_probe_69()
Nov 20 13:51:35 Shodan kernel: ircc_probe_69(), devid=0xff
Nov 20 13:51:35 Shodan kernel: ircc_probe_69()
Nov 20 13:51:35 Shodan kernel: ircc_probe_69(), devid=0x29
Nov 20 13:51:35 Shodan kernel: ircc_probe_69()
Nov 20 13:51:35 Shodan kernel: ircc_probe_69(), devid=0xff
Nov 20 13:51:35 Shodan kernel: ircc_probe_58()
Nov 20 13:51:35 Shodan kernel: ircc_probe_58(), devid=0xfc
Nov 20 13:51:35 Shodan kernel: ircc_probe_58()
Nov 20 13:51:35 Shodan kernel: ircc_probe_58(), devid=0xff
----------------------------------------------------------
and the module will not be loaded.
okey I rebootet and run the M$ system and started Biosdump.exe from the
howto, and got this:
----------------------------------------------------------------
In current devNode:
Size = 78
Handle = 14
ID = 0x1005D041 = 'PNP0510' -- Generic IrDA SIR
Types: Base = 0x07, Sub = 0x00, Interface = 0x00
Comm. Device, RS-232,
Attribute = 0x80
CAN be disabled
CAN be configured
BOTH Static & Dynamic configuration
Allocated Resource Descriptor Block TAG's:
TAG=0x22, Length=2 IRQ Tag, Mask=0x0000
TAG=0x47, Length=7 I/O Tag, 16-bit Decode
Min=0x0000, Max=0x0000
Align=0x00, Range=0x00
TAG=0x79, Length=1 END Tag, Data=0x00
Possible Resource Descriptor Block TAG's:
TAG=0x30, Length=0 StartDF Tag
TAG=0x22, Length=2 IRQ Tag, Mask=0x0010
TAG=0x47, Length=7 I/O Tag, 16-bit Decode
Min=0x03F8, Max=0x03F8
Align=0x00, Range=0x08
TAG=0x30, Length=0 StartDF Tag
TAG=0x22, Length=2 IRQ Tag, Mask=0x0008
TAG=0x47, Length=7 I/O Tag, 16-bit Decode
Min=0x02F8, Max=0x02F8
Align=0x00, Range=0x08
TAG=0x30, Length=0 StartDF Tag
TAG=0x22, Length=2 IRQ Tag, Mask=0x0400
TAG=0x47, Length=7 I/O Tag, 16-bit Decode
Min=0x03E8, Max=0x03E8
Align=0x00, Range=0x08
TAG=0x30, Length=0 StartDF Tag
TAG=0x22, Length=2 IRQ Tag, Mask=0x0800
TAG=0x47, Length=7 I/O Tag, 16-bit Decode
Min=0x02E8, Max=0x02E8
Align=0x00, Range=0x08
TAG=0x38, Length=0 EndDF Tag
TAG=0x79, Length=1 END Tag, Data=0x00
Compatible Device Identifier TAG's:
TAG=0x79, Length=1 END Tag, Data=0x00
-------------------------------------------------------------
so I tried to start the modul with params like io=0x03f8 and so...
but it all doesn't work.
Hope someone can help me...
Juergen Falb
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
