I have the following problem using ircomm at debian 2.2 on the hardware in
the subject:
Kernel is 2.2.17, Irda-utils are now 0.9.13.
When I try >irattach /dev/ttyS1
irattach terminates with the following in /var/log/syslog:
Dec 20 00:17:03 matthschulzg irattach: device=/dev/ttyS1
Dec 20 00:17:03 matthschulzg irattach: SIR device
Dec 20 00:17:03 matthschulzg irattach: tcsetattr: Input/output error
and therefore:
> pilot-xfer -p /dev/ircomm0 -l
Unable to bind to port '/dev/ircomm0'.
(Please see 'man pilot-xfer' or 'pilot-xfer --help' for information on
setting the port).
>
I loaded all drivers by hand
modprobe nsc-ircc
modprobe irtty
ifconfig irda0 up (this allocates irq3 to irda in /proc/interrupts)
>lsmod says then:
Module Size Used by
serial 18388 2 (autoclean) [serial_cs]
irtty 5124 0 (unused)
nsc-ircc 10020 1
irda 74337 0 [irtty nsc-ircc]
opl3 11304 0
opl3sa2 4176 0
ad1848 16752 0 [opl3sa2]
mpu401 19184 0 [opl3sa2]
sound 57388 0 [opl3 opl3sa2 ad1848 mpu401]
soundcore 2564 7 [sound]
unix 10660 108 (autoclean)
ifconfig shows incoming and outgoing packets:
irda0 Link encap:IrLAP HWaddr 61:62:7f:31
UP RUNNING NOARP MTU:2048 Metric:1
RX packets:133 errors:0 dropped:0 overruns:0 frame:0
TX packets:66 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:8
compared to (one minute later)
irda0 Link encap:IrLAP HWaddr 61:62:7f:31
UP RUNNING NOARP MTU:2048 Metric:1
RX packets:265 errors:0 dropped:0 overruns:0 frame:0
TX packets:132 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:8
> cat /proc/net/irda/discovery says:
IrLMP: Discovery log:
nickname: IrCOMM, hint: 0x8204, saddr: 0x61627f31, daddr: 0xb20a792d
>
What I'm doing wrong?
Matth
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
