On Thu, Dec 28, 2000 at 04:21:19PM +0100, Heiko Ronsdorf wrote:
> plumber:~ # tail -n0 -f /var/log/messages &
> plumber:~ # uname -a
> Linux plumber 2.4.0-test12 #18 Thu Dec 28 14:56:11 CET 2000 i686 unknown
> plumber:~ # .../findchip -v
> Found NSC PC87338 Controller at 0x398, DevID=0x0b, Rev. 2
> SIR Base 0x3f8, FIR Base 0x3f8
> IRQ = 10, DMA = 0
> Enabled: yes, Suspended: no
> UART compatible: yes
> Half duplex delay = 0 us
> plumber:~ # insmod .../nsc-ircc.o dongle_id=0x09
> Dec 28 15:52:50 plumber kernel: nsc-ircc, Found chip at base=0x398
> Dec 28 15:52:50 plumber kernel: nsc-ircc, driver loaded (Dag Brattli)
> Dec 28 15:52:50 plumber kernel: IrDA: Registered device irda0
> Dec 28 15:52:50 plumber kernel: nsc-ircc, Using dongle: IBM31T1100 \\
> 6000/TFDS6500
> Dec 28 15:52:50 plumber kernel: 9 dongle ID
> plumber:~ # cat /proc/net/irda/discovery
> IrLMP: Discovery log:
>
> nickname: SIEMENS S35, hint: 0x9024, saddr: 0x9f8d3ceb, daddr: 0x00469161
>
> This one works (for me), but it is not the right way, is it?
It is ... Attach the following to your modules.conf or conf.modules
------
alias irda0 nsc-ircc
alias char-major-161 ircomm-tty
alias tty-ldisc-11 irtty
options nsc-ircc dongle_id=0x9
------
In your startup scripts simply to
------
ifconfig irda0 up
echo 1 >/proc/sys/net/irda/discovery
------
Done
Flo
--
Florian Lohoff [EMAIL PROTECTED] +49-5201-669912
Why is it called "common sense" when nobody seems to have any?
_______________________________________________
Linux-IrDA mailing list - [EMAIL PROTECTED]
http://www.pasta.cs.UiT.No/mailman/listinfo/linux-irda
