early console in setup code
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 4.4.0-rc8-00001-ga9ddaac (kbuild@lkp-ib04) (gcc version 5.2.1 20150911 (Debian 5.2.1-17) ) #2 PREEMPT Sun Jan 24 23:42:12 CST 2016
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'lazy' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000bfdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000000bfe0000-0x000000000bffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0xbfe0 max_arch_pfn = 0x1000000
[    0.000000] MTRR: Disabled
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6630-0x000f663f] mapped at [c00f6630]
[    0.000000]   mpc: f6640-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x05dfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x05868000, 0x05868fff] PGTABLE
[    0.000000] BRK [0x05869000, 0x05869fff] PGTABLE
[    0.000000] BRK [0x0586a000, 0x0586afff] PGTABLE
[    0.000000] BRK [0x0586b000, 0x0586bfff] PGTABLE
[    0.000000] BRK [0x0586c000, 0x0586cfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x0bbcb000-0x0bfdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000000BFE16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000000BFE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000000BFE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000000BFE0000 000040
[    0.000000] ACPI: SSDT 0x000000000BFE0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000000BFE163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000000BFE16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 191MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 0bfe0000
[    0.000000]   low ram: 0 - 0bfe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:bbca001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 6630932438 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000001000-0x000000000bfdffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000000bfdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000000bfdffff]
[    0.000000] On node 0 totalpages: 49022
[    0.000000] free_area_init_node: node 0, pgdat c45fcb20, node_mem_map cba4a020
[    0.000000]   Normal zone: 384 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 49022 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 41d6bc0
[    0.000000] e820: [mem 0x0c000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 48638
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-openwrt-i386-23/bisect_boot-1-openwrt-i386.cgz-i386-randconfig-b0-01241634-a9ddaac527316789b14647b823878ca305827b55-20160124-13927-wsck40-2.yaml ARCH=i386 kconfig=i386-randconfig-b0-01241634 branch=linux-devel/devel-spot-201601241612 commit=a9ddaac527316789b14647b823878ca305827b55 BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-01241634/gcc-5/a9ddaac527316789b14647b823878ca305827b55/vmlinuz-4.4.0-rc8-00001-ga9ddaac max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-openwrt-i386/openwrt-i386.cgz/i386-randconfig-b0-01241634/gcc-5/a9ddaac527316789b14647b823878ca305827b55/1 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-openwrt-i386-23::dhcp drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[    0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 2406864 bytes of page_ext
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 113348K/196088K available (43095K kernel code, 9845K rwdata, 7620K rodata, 1348K init, 11964K bss, 82740K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa3000 - 0xfffff000   ( 368 kB)
[    0.000000]     pkmap   : 0xffc00000 - 0xffe00000   (2048 kB)
[    0.000000]     vmalloc : 0xcc7e0000 - 0xffbfe000   ( 820 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xcbfe0000   ( 191 MB)
[    0.000000]       .init : 0xc4b39000 - 0xc4c8a000   (1348 kB)
[    0.000000]       .data : 0xc3a15ff3 - 0xc4b376c0   (17541 kB)
[    0.000000]       .text : 0xc1000000 - 0xc3a15ff3   (43095 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=cb040000 soft=cb042000
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2926.328 MHz processor
[    0.168036] Calibrating delay loop (skipped) preset value.. 5852.65 BogoMIPS (lpj=29263280)
[    0.169225] pid_max: default: 32768 minimum: 301
[    0.169893] ACPI: Core revision 20150930
[    0.185057] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.186081] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.187078] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.188641] Initializing cgroup subsys freezer
[    0.189268] Initializing cgroup subsys net_cls
[    0.189918] Initializing cgroup subsys net_prio
[    0.190577] Initializing cgroup subsys hugetlb
[    0.191346] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.192133] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.192928] CPU: Intel QEMU Virtual CPU version 2.4.0 (family: 0x6, model: 0x6, stepping: 0x3)
[    0.199658] Performance Events: Broken PMU hardware detected, using software events only.
[    0.209256] Failed to access perfctr msr (MSR c2 is 0)
[    0.210975] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.211852] enabled ExtINT on CPU#0
[    0.213597] ENABLING IO-APIC IRQs
[    0.214135] init IO_APIC IRQs
[    0.214559]  apic 0 pin 0 not connected
[    0.215159] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.216346] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.217497] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.218677] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.219816] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.220905] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.222035] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.223160] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.224281] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.225432] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.226660] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.227807] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.228963] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.230126] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.231263] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.232445]  apic 0 pin 16 not connected
[    0.233030]  apic 0 pin 17 not connected
[    0.233600]  apic 0 pin 18 not connected
[    0.234180]  apic 0 pin 19 not connected
[    0.234723]  apic 0 pin 20 not connected
[    0.235281]  apic 0 pin 21 not connected
[    0.235822]  apic 0 pin 22 not connected
[    0.236415]  apic 0 pin 23 not connected
[    0.237198] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.238023] Using local APIC timer interrupts.
[    0.238023] calibrating APIC timer ...
[    0.361421] ... lapic delta = 6458155
[    0.361966] ... PM-Timer delta = 369876
[    0.362511] APIC calibration not consistent with PM-Timer: 103ms instead of 100ms
[    0.363505] APIC delta adjusted to PM-Timer: 6249993 (6458155)
[    0.364298] TSC delta adjusted to PM-Timer: 292631718 (302378098)
[    0.365115] ..... delta 6249993
[    0.365529] ..... mult: 268435155
[    0.366001] ..... calibration result: 9999988
[    0.366620] ..... CPU clock speed is 2926.3171 MHz.
[    0.371970] ..... host bus clock speed is 999.9988 MHz.
[    0.373128] devtmpfs: initialized
[    0.374178] gcov: version magic: 0x3530322a
[    0.393243] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.395460] RTC time: 23:44:47, date: 01/24/16
[    0.396368] NET: Registered protocol family 16
[    0.422920] cpuidle: using governor ladder
[    0.452922] cpuidle: using governor menu
[    0.457026] ACPI: bus type PCI registered
[    0.457662] PCI: Using configuration type 1 for base access
[    0.574083] ACPI: Added _OSI(Module Device)
[    0.574637] ACPI: Added _OSI(Processor Device)
[    0.575187] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.575773] ACPI: Added _OSI(Processor Aggregator Device)
[    0.586625] ACPI: Interpreter enabled
[    0.587114] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
[    0.588273] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
[    0.589522] ACPI: (supports S0 S3 S5)
[    0.589998] ACPI: Using IOAPIC for interrupt routing
[    0.590711] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.622014] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.622808] acpi PNP0A03:00: _OSC: OS supports [Segments MSI]
[    0.623580] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.624800] PCI host bridge to bus 0000:00
[    0.625319] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.626182] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.626983] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.627922] pci_bus 0000:00: root bus resource [mem 0x0c000000-0xfebfffff window]
[    0.628902] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.630080] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.636181] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.638082] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.653173] pci 0000:00:01.1: reg 0x20: [io  0xc0c0-0xc0cf]
[    0.657210] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.658081] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.660556] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.661435] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.663157] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.665070] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.665971] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.667771] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.671383] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.679174] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.691667] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.693316] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.696356] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.700511] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.735798] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.746343] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.755383] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.763701] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.807133] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    0.819132] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
[    0.824178] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[    0.871411] pci 0000:00:06.0: [8086:25ab] type 00 class 0x088000
[    0.873750] pci 0000:00:06.0: reg 0x10: [mem 0xfebf3000-0xfebf300f]
[    0.899699] pci_bus 0000:00: on NUMA node 0
[    0.912762] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.921148] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.927617] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.934196] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.938280] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.947153] ACPI: Enabled 16 GPEs in block 00 to 0F
[    0.958065] Linux video capture interface: v2.00
[    0.960312] pps_core: LinuxPPS API ver. 1 registered
[    0.962333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.966396] PTP clock support registered
[    0.969690] wmi: Mapper loaded
[    0.972282] FPGA manager framework
[    1.010559] Advanced Linux Sound Architecture Driver Initialized.
[    1.017738] PCI: Using ACPI for IRQ routing
[    1.018289] PCI: pci_cache_line_size set to 32 bytes
[    1.021339] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.022838] e820: reserve RAM buffer [mem 0x0bfe0000-0x0bffffff]
[    1.024399] NET: Registered protocol family 23
[    1.025013] NET: Registered protocol family 8
[    1.025526] NET: Registered protocol family 20
[    1.027123] nfc: nfc_init: NFC Core ver 0.1
[    1.042030] NET: Registered protocol family 39
[    1.047506] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.049361] clocksource: Switched to clocksource kvm-clock
[    1.063373] Warning: could not register all branches stats
[    1.064154] Warning: could not register annotated branches stats
[    1.143067] FS-Cache: Loaded
[    1.143667] pnp: PnP ACPI init
[    1.144340] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.145335] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.146319] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.147248] pnp 00:03: [dma 2]
[    1.148640] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.149991] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.151384] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.153668] pnp: PnP ACPI: found 6 devices
[    1.193765] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.195111] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.196006] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.196909] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.197852] pci_bus 0000:00: resource 7 [mem 0x0c000000-0xfebfffff window]
[    1.201489] NET: Registered protocol family 2
[    1.202503] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[    1.203342] TCP bind hash table entries: 2048 (order: 3, 40960 bytes)
[    1.204125] TCP: Hash tables configured (established 2048 bind 2048)
[    1.204941] UDP hash table entries: 256 (order: 1, 12288 bytes)
[    1.211031] UDP-Lite hash table entries: 256 (order: 1, 12288 bytes)
[    1.212071] NET: Registered protocol family 1
[    1.212949] RPC: Registered named UNIX socket transport module.
[    1.213651] RPC: Registered udp transport module.
[    1.214196] RPC: Registered tcp transport module.
[    1.214765] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.215655] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.216442] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.217226] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.218069] pci 0000:00:02.0: Video device with shadowed ROM
[    1.228109] PCI: CLS 0 bytes, default 32
[    1.229855] Unpacking initramfs...
[    2.685399] debug: unmapping init [mem 0xcbbcb000-0xcbfdffff]
[    2.700477] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    2.701203] apm: overridden by ACPI.
[    2.702214] NatSemi SCx200 Driver
[    2.703320] futex hash table entries: 256 (order: 0, 7168 bytes)
[    2.704012] audit: initializing netlink subsys (disabled)
[    2.704685] audit: type=2000 audit(1453650289.902:1): initialized
[    3.700141] tsc: Refined TSC clocksource calibration: 2926.330 MHz
[    3.701029] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2a2e6c2e1bb, max_idle_ns: 440795237926 ns
[    4.199867] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[    4.201021] cfg80211: Restoring regulatory settings
[    4.201705] cfg80211: Kicking the queue
[    7.358068] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[    7.359168] cfg80211: Restoring regulatory settings
[    7.359887] cfg80211: Kicking the queue
[   10.519346] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   10.526288] cfg80211: Restoring regulatory settings
[   10.526954] cfg80211: Kicking the queue
[   11.334787] Initialise system trusted keyring
[   11.357865] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   11.359004] VFS: Disk quotas dquot_6.6.0
[   11.359615] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   11.362270] DLM installed
[   11.366428] NFS: Registering the id_resolver key type
[   11.367137] Key type id_resolver registered
[   11.397818] Key type id_legacy registered
[   11.398403] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   11.399771] FS-Cache: Netfs 'cifs' registered for caching
[   11.402277] fuse init (API version 7.23)
[   11.403054] 9p: Installing v9fs 9p2000 file system support
[   11.403796] FS-Cache: Netfs '9p' registered for caching
[   11.404476] FS-Cache: Netfs 'ceph' registered for caching
[   11.405157] ceph: loaded (mds proto 32)
[   11.456263] NET: Registered protocol family 38
[   11.456921] Key type asymmetric registered
[   11.477781] start plist test
[   11.515100] end plist test
[   11.515517] test_string_helpers: Running tests...
[   11.529130] test_firmware: interface ready
[   11.530022] test_printf: all 111 tests passed
[   11.531158] crc32: CRC_LE_BITS = 32, CRC_BE BITS = 32
[   11.531830] crc32: self tests passed, processed 225944 bytes in 245504 nsec
[   11.548142] crc32c: CRC_LE_BITS = 32
[   11.548656] crc32c: self tests passed, processed 225944 bytes in 122289 nsec
[   11.626077] crc32_combine: 8373 self tests passed
[   11.673978] crc32c_combine: 8373 self tests passed
[   11.675418] xz_dec_test: module loaded
[   11.675921] xz_dec_test: Create a device node with 'mknod xz_dec_test c 250 0' and write .xz files to it.
[   11.677110] rbtree testing
[   13.688671] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   13.689865] cfg80211: Restoring regulatory settings
[   13.690534] cfg80211: Kicking the queue
[   16.847663] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   16.848701] cfg80211: Restoring regulatory settings
[   16.849332] cfg80211: Kicking the queue
[   18.979217]  -> 213673 cycles
[   19.416454] augmented rbtree testing
[   19.999434] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   20.000396] cfg80211: Restoring regulatory settings
[   20.000936] cfg80211: Kicking the queue
[   23.157715] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   23.160499] cfg80211: Restoring regulatory settings
[   23.161164] cfg80211: Kicking the queue
[   26.318675] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   26.319853] cfg80211: Restoring regulatory settings
[   26.320502] cfg80211: Kicking the queue
[   28.605090]  -> 268876 cycles
[   29.428304] 104-idio-16 104-idio-16: Unable to lock 104-idio-16 port addresses (0x0-0x8)
[   29.429439] 104-idio-16: probe of 104-idio-16 failed with error -16
[   29.431131] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   29.431871] cpcihp_generic: Generic port I/O CompactPCI Hot Plug Driver version: 0.1
[   29.432856] cpcihp_generic: not configured, disabling.
[   29.433586] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   29.435028] cr_bllcd: INTEL CARILLO RANCH LPC not found.
[   29.435727] cr_bllcd: Carillo Ranch Backlight Driver Initialized.
[   29.457810] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[   29.459349] vmlfb: initializing
[   29.460292] hgafb: HGA card not detected.
[   29.460825] hgafb: probe of hgafb.0 failed with error -22
[   29.464228] uvesafb: failed to execute /sbin/v86d
[   29.464874] uvesafb: make sure that the v86d helper is installed and executable
[   29.465835] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[   29.466703] uvesafb: vbe_init() failed with -22
[   29.467317] uvesafb: probe of uvesafb.0 failed with error -22
[   29.468188] ipmi message handler version 39.2
[   29.487919] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   29.489005] cfg80211: Restoring regulatory settings
[   29.489691] cfg80211: Kicking the queue
[   29.490268] ipmi device interface
[   29.490811] IPMI System Interface driver.
[   29.491451] ipmi_si: Unable to find any System Interface(s)
[   29.492164] IPMI SSIF Interface driver
[   29.492701] IPMI Watchdog: driver initialized
[   29.493262] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[   29.494775] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   29.495750] ACPI: Power Button [PWRF]
[   29.497178] Warning: Processor Platform Limit event detected, but not handled.
[   29.515439] Consider compiling CPUfreq support into your kernel.
[   30.147903] HDLC line discipline maxframe=4096
[   30.148525] N_HDLC line discipline registered.
[   30.149144] r3964: Philips r3964 Driver $Revision: 1.10 $
[   30.149889] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   30.222126] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   30.249622] Cyclades driver 2.6
[   30.250272] MOXA Intellio family driver version 6.0k
[   30.251040] Initializing Nozomi driver 2.1d
[   30.251687] RocketPort device driver module, version 2.09, 12-June-2003
[   30.252502] No rocketport ports found; unloading driver
[   30.253155] SyncLink GT
[   30.254477] SyncLink GT, tty major#244
[   30.255078] SyncLink GT no devices found
[   30.255601] SyncLink MultiPort driver $Revision: 4.38 $
[   30.497997] SyncLink MultiPort driver $Revision: 4.38 $, tty major#243
[   30.511070] lp: driver loaded but no devices found
[   30.511714] sonypi: Sony Programmable I/O Controller Driver v1.26.
[   30.512792] Non-volatile memory driver v1.3
[   30.513363] toshiba: not a supported Toshiba laptop
[   30.515988] ppdev: user-space parallel port driver
[   30.516784] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[   30.517680] platform pc8736x_gpio.0: no device found
[   30.518386] nsc_gpio initializing
[   30.528956] telclk_interrupt = 0xf non-mcpbl0010 hw.
[   30.529636] smapi::smapi_init, ERROR invalid usSmapiID
[   30.530260] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[   30.531367] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[   30.532237] mwave: mwavedd::mwave_init: Error: Failed to initialize
[   30.533010] Linux agpgart interface v0.103
[   30.535963] SyncLink PC Card driver $Revision: 4.34 $, tty major#242
[   30.548710] [drm] Initialized drm 1.1.0 20060810
[   30.549657] [drm] radeon kernel modesetting enabled.
[   30.550540] [drm] amdgpu kernel modesetting enabled.
[   30.558058] [drm] Found bochs VGA, ID 0xb0c0.
[   30.568803] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000.
[   30.570037] [TTM] Zone  kernel: Available graphics memory: 56674 kiB
[   30.570887] [TTM] Initializing pool allocator
[   30.571534] [TTM] Initializing DMA pool allocator
[   30.574407] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1
[   30.577705] parport_pc 00:04: reported by Plug and Play ACPI
[   30.588818] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   30.669947] lp0: using parport0 (interrupt-driven).
[   30.679197] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[   30.680206] dummy-irq: no IRQ given.  Use irq=N
[   30.681917] Phantom Linux Driver, version n0.9.8, init OK
[   30.685300] Guest personality initialized and is inactive
[   30.686265] VMCI host device registered (name=vmci, major=10, minor=58)
[   30.687133] Initialized host personality
[   30.723507] mtdoops: mtd device (mtddev=name/number) must be supplied
[   30.724472] platform physmap-flash.0: failed to claim resource 0
[   30.725304] scx200_docflash: NatSemi SCx200 DOCCS Flash Driver
[   30.742374] slram: not enough parameters.
[   30.742927] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[   30.743926] pmc551: not detected
[   30.874116] No valid DiskOnChip devices found
[   30.874942] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[   30.907298] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[   30.955743] libphy: Fixed MDIO Bus: probed
[   30.970278] tun: Universal TUN/TAP device driver, 1.6
[   30.970941] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[   30.973082] arcnet: arcnet loaded
[   30.973529] arcnet:capmode: cap mode (`c') encapsulation support loaded
[   30.988400] arcnet:com90io: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[   30.989453] arcnet:com90io: E-mail me if you actually test this driver, please!
[   30.990343] (unnamed net_device) (uninitialized): No autoprobe for IO mapped cards; you must specify the base address!
[   30.991674] arcnet:arc_rimi: RIM I (entirely mem-mapped) support
[   30.992403] arcnet:arc_rimi: E-mail me if you actually test the RIM I driver, please!
[   30.993354] arcnet:arc_rimi: Given: node 00h, shmem 0h, irq 0
[   31.004846] arcnet:arc_rimi: No autoprobe for RIM I; you must specify the shmem and irq!
[   31.005866] arcnet:com20020_pci: COM20020 PCI support
[   31.006593] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   31.016064] ipddp0: Appletalk-IP Decap. mode by Jay Schulist <jschlst@samba.org>
[   31.021958] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   31.022923] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   32.082428] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   32.649913] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   32.650977] cfg80211: Restoring regulatory settings
[   32.651588] cfg80211: Kicking the queue
[   32.917683] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[   32.918624] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[   32.919589] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   32.920318] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   32.921167] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[   32.922084] igb: Copyright (c) 2007-2014 Intel Corporation.
[   32.924465] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.2.1-k
[   32.925420] ixgbe: Copyright (c) 1999-2015 Intel Corporation.
[   32.950735] NET3 PLIP version 2.4-parport gniibe@mri.co.jp
[   32.951436] plip0: Parallel port at 0x378, using IRQ 7.
[   32.952093] PPP generic driver version 2.4.2
[   32.952844] PPP BSD Compression module registered
[   32.953440] PPP Deflate Compression module registered
[   32.954081] NET: Registered protocol family 24
[   32.954642] PPTP driver version 0.8.5
[   32.955561] ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
[   32.956388] ipw2100: Copyright(c) 2003-2006 Intel Corporation
[   32.978900] ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.2kdq
[   32.979813] ipw2200: Copyright(c) 2003-2006 Intel Corporation
[   32.980612] libipw: 802.11 data/management/control stack, git-1.1.13
[   32.981381] libipw: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   32.982354] orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
[   32.983594] orinoco_plx 0.15 (Pavel Roskin <proski@gnu.org>, David Gibson <hermes@gibson.dropbear.id.au>, Daniel Barlow <dan@telent.net>)
[   32.985158] orinoco_nortel 0.15 (Tobias Hoffmann & Christoph Jungegger <disdos@traum404.de>)
[   32.986297] airo(): Probing for PCI adapters
[   32.986899] airo(): Finished probing for PCI adapters
[   33.009303] Loaded prism54 driver, version 1.2
[   33.010197] libertas_sdio: Libertas SDIO driver
[   33.010761] libertas_sdio: Copyright Pierre Ossman
[   33.013208] Madge ATM Ambassador driver version 1.2.4
[   33.013842] amb: debug bitmap is 0
[   33.014336] fore200e: FORE Systems 200E-series ATM driver - version 0.3e
[   33.015278] Solos PCI Driver Version 1.04
[   33.015849] adummy: version 1.0
[   33.040615] parport0: cannot grant exclusive access for device ks0108
[   33.041465] ks0108: ERROR: parport didn't register new device
[   33.042188] cfag12864b: ERROR: ks0108 is not initialized
[   33.042851] cfag12864bfb: ERROR: cfag12864b is not initialized
[   33.045387] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   33.047331] serio: i8042 KBD port at 0x60,0x64 irq 1
[   33.070010] serio: i8042 AUX port at 0x60,0x64 irq 12
[   33.070993] parport0: cannot grant exclusive access for device parkbd
[   33.074303] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[   33.077158] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   33.103698] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[   33.107139] mk712: device not present
[   33.131351] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[   33.133785] ideapad_slidebar: DMI does not match
[   33.134442] i2c /dev entries driver
[   34.292354] ACPI: No IRQ available for PCI Interrupt Link [LNKS]. Try pci=noacpi or acpi=off
[   34.293480] piix4_smbus 0000:00:01.3: PCI INT A: no GSI
[   34.294239] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
[   34.551760] i2c-parport-light: adapter type unspecified
[   34.558977] lirc_dev: IR Remote Control driver registered, major 237 
[   34.559857] IR RC5(x/sz) protocol handler initialized
[   34.560487] IR RC6 protocol handler initialized
[   34.561073] IR JVC protocol handler initialized
[   34.561641] IR Sony protocol handler initialized
[   34.562233] IR SANYO protocol handler initialized
[   34.562837] IR MCE Keyboard/mouse protocol handler initialized
[   34.563552] IR LIRC bridge handler initialized
[   34.566328] pps pps0: new PPS source ktimer
[   34.566884] pps pps0: ktimer PPS source registered
[   34.567476] pps_parport: parallel port PPS client
[   34.578149] parport0: cannot grant exclusive access for device pps_parport
[   34.579025] pps_parport: couldn't register with parport0
[   34.581328] Driver for 1-wire Dallas network protocol.
[   34.582260] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[   34.583591] __power_supply_register: Expected proper parent device for 'test_ac'
[   34.585742] power_supply test_ac: uevent
[   34.586243] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   34.586962] __power_supply_register: Expected proper parent device for 'test_battery'
[   34.608031] power_supply test_ac: power_supply_changed
[   34.608705] power_supply test_ac: power_supply_changed_work
[   34.609459] power_supply test_ac: uevent
[   34.609966] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   34.610672] power_supply test_ac: prop ONLINE=1
[   34.613232] power_supply test_battery: uevent
[   34.613804] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   34.614759] __power_supply_register: Expected proper parent device for 'test_usb'
[   34.617135] power_supply test_usb: uevent
[   34.637772] power_supply test_battery: power_supply_changed
[   34.638477] power_supply test_battery: power_supply_changed_work
[   34.639273] power_supply test_battery: uevent
[   34.639871] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   34.640677] power_supply test_battery: prop STATUS=Discharging
[   34.641414] power_supply test_battery: prop CHARGE_TYPE=Fast
[   34.642132] power_supply test_battery: prop HEALTH=Good
[   34.642789] power_supply test_battery: prop PRESENT=1
[   34.643419] power_supply test_battery: prop TECHNOLOGY=Li-ion
[   34.644139] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[   34.644931] power_supply test_battery: prop CHARGE_FULL=100
[   34.645632] power_supply test_battery: prop CHARGE_NOW=50
[   34.646300] power_supply test_battery: prop CAPACITY=50
[   34.646961] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   34.667822] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   34.671262] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   34.672064] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   34.672827] power_supply test_battery: prop MODEL_NAME=Test battery
[   34.673606] power_supply test_battery: prop MANUFACTURER=Linux
[   34.674328] power_supply test_battery: prop SERIAL_NUMBER=4.4.0-rc8-00001-ga9ddaac
[   34.675275] power_supply test_battery: prop TEMP=26
[   34.675897] power_supply test_battery: prop VOLTAGE_NOW=3300
[   34.676612] power_supply test_usb: power_supply_changed
[   34.677274] power_supply test_usb: power_supply_changed_work
[   34.698169] power_supply test_usb: uevent
[   34.698700] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   34.699452] power_supply test_usb: prop ONLINE=1
[   35.509487] applesmc: supported laptop not found!
[   35.510139] applesmc: driver init failed (ret=-19)!
[   35.769512] f71882fg: Not a Fintek device
[   35.769991] f71882fg: Not a Fintek device
[   35.799452] cfg80211: Timeout while waiting for CRDA to reply, restoring regulatory settings
[   35.800575] cfg80211: Restoring regulatory settings
[   35.801224] cfg80211: Kicking the queue
[   37.648830] pc87360: PC8736x not detected, module not inserted
[   37.649666] sch56xx_common: Unsupported device id: 0xff
[   37.650310] sch56xx_common: Unsupported device id: 0xff
[   38.253642] intel_powerclamp: Intel powerclamp does not run on family 6 model 6
[   38.259710] acquirewdt: WDT driver for Acquire single board computer initialising
[   38.260869] acquirewdt: I/O address 0x0043 already in use
[   38.261547] acquirewdt: probe of acquirewdt failed with error -5
[   38.264885] advantechwdt: WDT driver for Advantech single board computer initialising
[   38.280043] advantechwdt: initialized. timeout=60 sec (nowayout=1)
[   38.280853] alim7101_wdt: Steve Hill <steve@navaho.co.uk>
[   38.281524] alim7101_wdt: ALi M7101 PMU not present - WDT not set
[   38.282331] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05
[   38.292378] ib700wdt: WDT driver for IB700 single board computer initialising
[   38.293523] ib700wdt: START method I/O 443 is not available
[   38.294277] ib700wdt: probe of ib700wdt failed with error -5
[   38.295127] wafer5823wdt: WDT driver for Wafer 5823 single board computer initialising
[   38.296176] wafer5823wdt: I/O address 0x0443 already in use
[   38.296919] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[   38.317899] it87_wdt: no device
[   38.318431] sc1200wdt: build 20020303
[   38.318945] sc1200wdt: io parameter must be specified
[   38.319623] pc87413_wdt: Version 1.1 at io 0x2E
[   38.320185] pc87413_wdt: cannot register miscdev on minor=130 (err=-16)
[   38.320991] nv_tco: NV TCO WatchDog Timer Driver v0.01
[   38.323517] sbc60xxwdt: I/O address 0x0443 already in use
[   38.324217] sbc8360: failed to register misc device
[   38.324840] cpu5wdt: misc_register failed
[   38.325388] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising...
[   38.327403] smsc37b787_wdt: Unable to register miscdev on minor 130
[   38.328249] w83977f_wdt: driver v1.00
[   38.338846] w83977f_wdt: cannot register miscdev on minor=130 (err=-16)
[   38.341505] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16).
[   38.342576] watchdog: Software Watchdog: a legacy watchdog module is probably present.
[   38.343811] softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=1)
[   38.345198] lguest: mapped switcher at fff9f000
[   38.347483] sdhci: Secure Digital Host Controller Interface driver
[   38.348248] sdhci: Copyright(c) Pierre Ossman
[   38.361286] wbsd: Winbond W83L51xD SD/MMC card interface driver
[   38.362014] wbsd: Copyright(c) Pierre Ossman
[   38.362827] sdhci-pltfm: SDHCI platform and OF driver helper
[   38.534722] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[   38.535546] vme_user: VME User Space Access Driver
[   38.536110] vme_user: No cards, skipping registration
[   38.536705] vme_pio2: No cards, skipping registration
[   38.537297] no options.
[   38.558825] FPGA DOWNLOAD --->
[   38.559218] FPGA image file name: xlinx_fpga_firmware.bit
[   38.560155] GPIO INIT FAIL!!
[   38.560698] cros_ec_lpc: unsupported system.
[   38.564666]  fake-fmc-carrier: mezzanine 0
[   38.565195]       Manufacturer: fake-vendor
[   38.565708]       Product name: fake-design-for-testing
[   38.566447] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[   38.567319] fmc_trivial: probe of fake-design-for-testing-f001 failed with error -95
[   38.579497] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[   38.582181] fmc_chardev fake-design-for-testing-f001: Created misc device "fake-design-for-testing-f001"
[   38.583700] intel_rapl: driver does not support CPU family 6 model 6
[   38.660741] snd_mts64: probe of snd_mts64.0 failed with error -5
[   38.661794] snd_portman2x4: probe of snd_portman2x4.0 failed with error -5
[   38.667011] ASIHPI driver 4.14.03
[   38.713128] netem: version 1.3
[   38.713702] ipip: IPv4 over IPv4 tunneling driver
[   38.716184] gre: GRE over IPv4 demultiplexor driver
[   38.716782] ip_gre: GRE over IPv4 tunneling driver
[   38.732845] NET: Registered protocol family 17
[   38.733506] NET: Registered protocol family 15
[   38.734128] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   38.737169] NET: Registered protocol family 4
[   38.737828] NET: Registered protocol family 5
[   38.738390] NET: Registered protocol family 9
[   38.749076] X25: Linux Version 0.2
[   38.751098] lec:lane_module_init: lec.c: initialized
[   38.751730] mpoa:atm_mpoa_init: mpc.c: initialized
[   38.752321] NET4: DECnet for Linux: V.2.5.68s (C) 1995-2003 Linux DECnet Project Team
[   38.753359] DECnet: Routing cache hash table of 128 buckets, 2Kbytes
[   38.754143] NET: Registered protocol family 12
[   38.755548] NET: Registered protocol family 35
[   38.756130] 8021q: 802.1Q VLAN Support v1.8
[   38.756808] DCCP: Activated CCID 2 (TCP-like)
[   38.757453] sctp: Hash tables configured (established 2048 bind 1638)
[   38.759478] lib80211: common routines for IEEE802.11 drivers
[   38.760229] lib80211_crypt: registered algorithm 'NULL'
[   38.760937] lib80211_crypt: registered algorithm 'WEP'
[   38.761648] lib80211_crypt: registered algorithm 'CCMP'
[   38.762347] lib80211_crypt: registered algorithm 'TKIP'
[   38.763069] tipc: Activated (version 2.0.0)
[   38.763674] NET: Registered protocol family 30
[   38.765597] tipc: Started in single node mode
[   38.766321] 9pnet: Installing 9P2000 support
[   38.766999] NET: Registered protocol family 37
[   38.767638] NET: Registered protocol family 36
[   38.768179] Key type dns_resolver registered
[   38.778902] Key type ceph registered
[   38.779525] libceph: loaded (mon/osd proto 15/24)
[   38.781775] batman_adv: B.A.T.M.A.N. advanced 2015.2 (compatibility version 15) loaded
[   38.786658] microcode: CPU0 sig=0x663, pf=0x1, revision=0x1
[   38.818224] microcode: Microcode Update Driver: v2.01 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[   38.819349] ... APIC ID:      00000000 (0)
[   38.819864] ... APIC VERSION: 01050014
[   38.820339] 0000000000000000000000000000000000000000000000000000000000000000
[   38.821389] 0000000000000000000000000000000000000000000000000000000000000000
[   38.822515] 0000000000000000000000000000000000000000000000000000000000008000
[   38.823666] 
[   38.823910] number of MP IRQ sources: 15.
[   38.824434] number of IO-APIC #0 registers: 24.
[   38.825017] testing the IO APIC.......................
[   38.825690] IO APIC #0......
[   38.826061] .... register #00: 00000000
[   38.826549] .......    : physical APIC id: 00
[   38.827099] .......    : Delivery Type: 0
[   38.847738] .......    : LTS          : 0
[   38.848239] .... register #01: 00170011
[   38.848744] .......     : max redirection entries: 17
[   38.849322] .......     : PRQ implemented: 0
[   38.849855] .......     : IO APIC version: 11
[   38.850365] .... register #02: 00000000
[   38.850820] .......     : arbitration: 00
[   38.851285] .... IRQ redirection table:
[   38.851754] IOAPIC 0:
[   38.852056]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.853019]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[   38.853978]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[   38.854930]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.855843]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.856751]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.877784]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.878712]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[   38.879674]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.880594]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[   38.881500]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.882413]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.883328]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[   38.884238]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.885152]  pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.886066]  pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.886986]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.908032]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.908987]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.909969]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.910926]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.911879]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.912831]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.913792]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   38.914724] IRQ to pin mappings:
[   38.915111] IRQ0 -> 0:2
[   38.915467] IRQ1 -> 0:1
[   38.915817] IRQ3 -> 0:3
[   38.916146] IRQ4 -> 0:4
[   38.916476] IRQ5 -> 0:5
[   38.916813] IRQ6 -> 0:6
[   38.917141] IRQ7 -> 0:7
[   38.917468] IRQ8 -> 0:8
[   38.937950] IRQ9 -> 0:9
[   38.938294] IRQ10 -> 0:10
[   38.938672] IRQ11 -> 0:11
[   38.939021] IRQ12 -> 0:12
[   38.939399] IRQ13 -> 0:13
[   38.939763] IRQ14 -> 0:14
[   38.940111] IRQ15 -> 0:15
[   38.940458] .................................... done.
[   38.941070] Using IPI Shortcut mode
[   38.943591] registered taskstats version 1
[   38.944109] Loading compiled-in X.509 certificates
[   38.945835] page_owner is disabled
[   38.946504] Key type trusted registered
[   38.947388] Key type encrypted registered
[   38.974734] RIO: rio_register_scan for mport_id=-1
[   38.975710]   Magic number: 0:897:757
[   39.002648] 8021q: adding VLAN 0 to HW filter on device bond0
[   39.003439] IP-Config: Failed to open ipddp0
[   39.020738] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   39.030788] 8021q: adding VLAN 0 to HW filter on device eth0
[   39.033200] IP-Config: Failed to open plip0
[   39.033730] IP-Config: Failed to open gretap0
[   39.049457] Sending DHCP requests ., OK
[   40.089523] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[   40.097532] IP-Config: Complete:
[   40.118143]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[   40.119431]      host=vm-intel12-openwrt-i386-23, domain=, nis-domain=(none)
[   40.120350]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=
[   40.121155]      nameserver0=10.0.2.3
[   40.121742] ALSA device list:
[   40.122140]   #0: Dummy 1
[   40.122489]   #1: Loopback 1
[   40.123549] debug: unmapping init [mem 0xc4b39000-0xc4c89fff]
procd: Console is alive
procd: - watchdog -
procd: - preinit -
[   40.480548] random: mktemp urandom read with 0 bits of entropy available
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
mounting /dev/root
mount: mounting 1 on /mnt failed: No such device
mv: can't rename '/mnt/sysupgrade.tgz': No such file or directory
umount: can't umount /mnt: Invalid argument
procd: - early -
procd: - watchdog -
procd: - ubus -
procd: - init -
Please press Enter to activate this console.
[   54.653376] 8021q: adding VLAN 0 to HW filter on device eth0
[   54.708841] device eth0 entered promiscuous mode
[   56.639230] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   56.646758] br-lan: port 1(eth0) entered forwarding state
[   56.648551] br-lan: port 1(eth0) entered forwarding state
[   58.640021] br-lan: port 1(eth0) entered forwarding state
[   66.913500] sock: process `trinity-main' is using obsolete setsockopt SO_BSDCOMPAT
[   67.989526] irda_setsockopt: not allowed to set MAXSDUSIZE for this socket type!
procd: Instance odhcpd::instance1 s in a crash loop 6 crashes, 0 seconds since last crash
[   95.806364] cfg80211: Verifying active interfaces after reg change
[  123.252515] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[  123.519205] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[  123.595291] mmap: trinity-c0 (2848) uses deprecated remap_file_pages() syscall. See Documentation/vm/remap_file_pages.txt.
[  123.831528] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[  125.356676] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
[  127.982796] VFS: Warning: trinity-c0 using old stat() call. Recompile your binary.
procd: - shutdown -
[  156.812436] br-lan: port 1(eth0) entered disabled state
[  156.824468] device eth0 left promiscuous mode
[  156.854255] br-lan: port 1(eth0) entered disabled state
procd: - reboot -
[  158.876086] Unregister pv shared memory for cpu 0
[  159.100443] reboot: Restarting system
[  159.100924] reboot: machine restart

Elapsed time: 170
qemu-system-i386 -enable-kvm -kernel /pkg/linux/i386-randconfig-b0-01241634/gcc-5/a9ddaac527316789b14647b823878ca305827b55/vmlinuz-4.4.0-rc8-00001-ga9ddaac -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-intel12-openwrt-i386-23/bisect_boot-1-openwrt-i386.cgz-i386-randconfig-b0-01241634-a9ddaac527316789b14647b823878ca305827b55-20160124-13927-wsck40-2.yaml ARCH=i386 kconfig=i386-randconfig-b0-01241634 branch=linux-devel/devel-spot-201601241612 commit=a9ddaac527316789b14647b823878ca305827b55 BOOT_IMAGE=/pkg/linux/i386-randconfig-b0-01241634/gcc-5/a9ddaac527316789b14647b823878ca305827b55/vmlinuz-4.4.0-rc8-00001-ga9ddaac max_uptime=600 RESULT_ROOT=/result/boot/1/vm-intel12-openwrt-i386/openwrt-i386.cgz/i386-randconfig-b0-01241634/gcc-5/a9ddaac527316789b14647b823878ca305827b55/1 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-intel12-openwrt-i386-23::dhcp drbd.minor_count=8'  -initrd /fs/KVM/initrd-vm-intel12-openwrt-i386-23 -m 192 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -drive file=/fs/KVM/disk0-vm-intel12-openwrt-i386-23,media=disk,if=virtio -drive file=/fs/KVM/disk1-vm-intel12-openwrt-i386-23,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-intel12-openwrt-i386-23 -serial file:/dev/shm/kboot/serial-vm-intel12-openwrt-i386-23 -daemonize -display none -monitor null 
