early console in setup code
early console in decompress_kernel
input_data: 0x021ae079
input_len: 0x00923473
output: 0x01000000
output_len: 0x01abf1a0
run_size: 0x028e6000
KASLR disabled by default...

Decompressing Linux... Parsing ELF... No relocation needed... done.
Booting the kernel.
[    0.000000] Linux version 4.6.0-rc6-00055-g1c3ceab (kbuild@roam) (gcc version 6.1.1 20160430 (Debian 6.1.1-1) ) #1 SMP PREEMPT Tue May 31 12:38:05 CST 2016
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at [c00f6640]
[    0.000000]   mpc: f6650-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x03bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x036da000, 0x036dafff] PGTABLE
[    0.000000] BRK [0x036db000, 0x036ddfff] PGTABLE
[    0.000000] BRK [0x036de000, 0x036defff] PGTABLE
[    0.000000] BRK [0x036df000, 0x036dffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x14d87000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6470 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: SSDT 0x00000000167E0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x00000000167E163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 359MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 167e0000
[    0.000000]   low ram: 0 - 167e0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:14d85001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 21943062858 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000167dffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000] free_area_init_node: node 0, pgdat c26ac000, node_mem_map d4a01028
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 860 pages used for memmap
[    0.000000]   Normal zone: 88032 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 17 pages/cpu @d49e7000 s45248 r0 d24384 u69632
[    0.000000] pcpu-alloc: s45248 r0 d24384 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 149e9bc0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91130
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-41/bisect_boot-1-quantal-core-i386.cgz-i386-randconfig-x0-05310913-1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5-20160531-120469-1d4e5q5-0.yaml ARCH=i386 kconfig=i386-randconfig-x0-05310913 branch=linux-devel/devel-catchup-201605311016 commit=1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5 BOOT_IMAGE=/pkg/linux/i386-randconfig-x0-05310913/gcc-6/1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5/vmlinuz-4.6.0-rc6-00055-g1c3ceab max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-x0-05310913/gcc-6/1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-41::dhcp drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4843852 bytes of page_ext
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 292428K/368120K available (15349K kernel code, 2174K rwdata, 6520K rodata, 1076K init, 14484K bss, 75692K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffa96000 - 0xfffff000   (5540 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffa00000   (2048 kB)
[    0.000000]     vmalloc : 0xd6fe0000 - 0xff7fe000   ( 648 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd67e0000   ( 359 MB)
[    0.000000]       .init : 0xc277f000 - 0xc288c000   (1076 kB)
[    0.000000]       .data : 0xc1efd9d4 - 0xc277d940   (8703 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1efd9d4   (15350 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=d422a000 soft=d422c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 4.6.0-rc6-00055-g1c3ceab (kbuild@roam) (gcc version 6.1.1 20160430 (Debian 6.1.1-1) ) #1 SMP PREEMPT Tue May 31 12:38:05 CST 2016
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- WT  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at [c00f6640]
[    0.000000]   mpc: f6650-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x03bfffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x036da000, 0x036dafff] PGTABLE
[    0.000000] BRK [0x036db000, 0x036ddfff] PGTABLE
[    0.000000] BRK [0x036de000, 0x036defff] PGTABLE
[    0.000000] BRK [0x036df000, 0x036dffff] PGTABLE
[    0.000000] RAMDISK: [mem 0x14d87000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6470 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: SSDT 0x00000000167E0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x00000000167E163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 359MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 167e0000
[    0.000000]   low ram: 0 - 167e0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:14d85001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 21943062858 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x00000000167dffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000] free_area_init_node: node 0, pgdat c26ac000, node_mem_map d4a01028
[    0.000000]   DMA zone: 40 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 860 pages used for memmap
[    0.000000]   Normal zone: 88032 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 17 pages/cpu @d49e7000 s45248 r0 d24384 u69632
[    0.000000] pcpu-alloc: s45248 r0 d24384 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 149e9bc0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91130
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-41/bisect_boot-1-quantal-core-i386.cgz-i386-randconfig-x0-05310913-1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5-20160531-120469-1d4e5q5-0.yaml ARCH=i386 kconfig=i386-randconfig-x0-05310913 branch=linux-devel/devel-catchup-201605311016 commit=1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5 BOOT_IMAGE=/pkg/linux/i386-randconfig-x0-05310913/gcc-6/1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5/vmlinuz-4.6.0-rc6-00055-g1c3ceab max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-x0-05310913/gcc-6/1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-41::dhcp drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 4843852 bytes of page_ext
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 292428K/368120K available (15349K kernel code, 2174K rwdata, 6520K rodata, 1076K init, 14484K bss, 75692K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffa96000 - 0xfffff000   (5540 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffa00000   (2048 kB)
[    0.000000]     vmalloc : 0xd6fe0000 - 0xff7fe000   ( 648 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd67e0000   ( 359 MB)
[    0.000000]       .init : 0xc277f000 - 0xc288c000   (1076 kB)
[    0.000000]       .data : 0xc1efd9d4 - 0xc277d940   (8703 kB)
[    0.000000]       .text : 0xc1000000 - 0xc1efd9d4   (15350 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=d422a000 soft=d422c000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 4895 kB
[    0.000000]  per task-struct memory footprint: 1344 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.643226] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.646020] pid_max: default: 32768 minimum: 301
[    0.647540] ACPI: Core revision 20160108
[    0.780279] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.782138] 
[    0.783327] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.789157] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.800685] mce: CPU supports 10 MCE banks
[    0.802149] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.807786] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.857680] Freeing SMP alternatives memory: 40K (c288c000 - c2896000)
[    0.873434] ftrace: allocating 50917 entries in 100 pages
[    1.024966] smpboot: Max logical packages: 1
[    1.026337] smpboot: APIC(0) Converting physical 0 to logical package 0
[    1.032087] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    1.033752] enabled ExtINT on CPU#0
[    1.040172] ENABLING IO-APIC IRQs
[    1.041476] init IO_APIC IRQs
[    1.042648]  apic 0 pin 0 not connected
[    1.048017] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    1.050528] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    1.057209] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    1.063892] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    1.066519] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    1.073143] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    1.088394] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    1.091012] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    1.093686] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    1.096352] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    1.098958] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    1.101566] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    1.116861] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    1.119529] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    1.122220] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    1.124836]  apic 0 pin 16 not connected
[    1.126120]  apic 0 pin 17 not connected
[    1.127408]  apic 0 pin 18 not connected
[    1.132744]  apic 0 pin 19 not connected
[    1.133984]  apic 0 pin 20 not connected
[    1.135276]  apic 0 pin 21 not connected
[    1.140645]  apic 0 pin 22 not connected
[    1.141981]  apic 0 pin 23 not connected
[    1.143463] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    1.149209] TSC deadline timer enabled
[    1.150479] smpboot: CPU0: Intel Core Processor (Haswell) (family: 0x6, model: 0x3c, stepping: 0x1)
[    1.166171] Performance Events: unsupported p6 CPU model 60 no PMU driver, software events only.
[    1.176323] x86: Booted up 1 node, 1 CPUs
[    1.190659] ----------------
[    1.191818] | NMI testsuite:
[    1.192971] --------------------
[    1.194166]   remote IPI:  ok  |
[    1.195570]    local IPI:  ok  |
[    1.218798] --------------------
[    1.219974] Good, all   2 testcases passed! |
[    1.221222] ---------------------------------
[    1.222483] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[    1.225392] devtmpfs: initialized
[    1.242436] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    1.245548] xor: automatically using best checksumming function:
[    1.319901]    avx       : 14509.000 MB/sec
[    1.323395] prandom: seed boundary self test passed
[    1.331906] prandom: 100 self tests passed
[    1.335380] atomic64_test: passed for i586+ platform with CX8 and with SSE
[    1.351687] NET: Registered protocol family 16
[    1.383349] cpuidle: using governor ladder
[    1.385989] ACPI: bus type PCI registered
[    1.388860] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it NX.
[    1.391547] PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0
[    1.393339] PCI: Using configuration type 1 for base access
[    1.637457] workqueue: round-robin CPU selection forced, expect performance impact
[    1.768515] raid6: mmxx1    gen()  2157 MB/s
[    1.859298] raid6: mmxx2    gen()  2320 MB/s
[    1.969310] raid6: sse1x1   gen()  2219 MB/s
[    2.037491] raid6: sse1x2   gen()  3200 MB/s
[    2.116307] raid6: sse2x1   gen()  4689 MB/s
[    2.266312] raid6: sse2x1   xor()  3003 MB/s
[    2.390295] raid6: sse2x2   gen()  5520 MB/s
[    2.497302] raid6: sse2x2   xor()  3793 MB/s
[    2.498763] raid6: using algorithm sse2x2 gen() 5520 MB/s
[    2.500362] raid6: .... xor() 3793 MB/s, rmw enabled
[    2.501952] raid6: using ssse3x1 recovery algorithm
[    2.518419] ACPI: Added _OSI(Module Device)
[    2.519786] ACPI: Added _OSI(Processor Device)
[    2.521212] ACPI: Added _OSI(3.0 _SCP Extensions)
[    2.522671] ACPI: Added _OSI(Processor Aggregator Device)
[    2.576948] ACPI: Interpreter enabled
[    2.578490] ACPI: (supports S0 S3 S4 S5)
[    2.579896] ACPI: Using IOAPIC for interrupt routing
[    2.581792] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.825595] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    2.827367] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    2.829095] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    2.830876] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    2.835347] PCI host bridge to bus 0000:00
[    2.836730] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    2.851656] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.853432] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.855946] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[    2.858446] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.860146] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    2.879064] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    2.885016] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    2.900552] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    2.903887] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    2.905780] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    2.917931] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    2.919507] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    2.924634] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    2.926836] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    2.929448] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    2.948204] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    2.961819] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    2.966615] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    2.987892] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    2.993769] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    3.007156] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    3.010038] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    3.030593] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    3.036453] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    3.038874] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    3.058826] pci_bus 0000:00: on NUMA node 0
[    3.082431] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    3.099624] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    3.104140] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    3.121778] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    3.124869] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    3.130969] ACPI: Enabled 16 GPEs in block 00 to 0F
[    3.157948] vgaarb: setting as boot device: PCI:0000:00:02.0
[    3.159632] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    3.162415] vgaarb: loaded
[    3.163585] vgaarb: bridge control possible 0000:00:02.0
[    3.183665] SCSI subsystem initialized
[    3.185461] libata version 3.00 loaded.
[    3.186992] ACPI: bus type USB registered
[    3.188771] usbcore: registered new interface driver usbfs
[    3.190664] usbcore: registered new interface driver hub
[    3.192503] usbcore: registered new device driver usb
[    3.195010] pps_core: LinuxPPS API ver. 1 registered
[    3.206652] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.236825] PTP clock support registered
[    3.253676] FPGA manager framework
[    3.255404] Advanced Linux Sound Architecture Driver Initialized.
[    3.257680] PCI: Using ACPI for IRQ routing
[    3.259119] PCI: pci_cache_line_size set to 64 bytes
[    3.260796] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    3.262612] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[    3.280475] NET: Registered protocol family 23
[    3.282232] Bluetooth: Core ver 2.21
[    3.283665] NET: Registered protocol family 31
[    3.285153] Bluetooth: HCI device and connection manager initialized
[    3.286978] Bluetooth: HCI socket layer initialized
[    3.288550] Bluetooth: L2CAP socket layer initialized
[    3.290256] Bluetooth: SCO socket layer initialized
[    3.292142] nfc: nfc_init: NFC Core ver 0.1
[    3.306792] NET: Registered protocol family 39
[    3.309371] clocksource: Switched to clocksource kvm-clock
[    3.332112] Warning: could not register annotated branches stats
[    3.718822] VFS: Disk quotas dquot_6.6.0
[    3.720317] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    3.736684] pnp: PnP ACPI init
[    3.739048] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    3.741763] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    3.744473] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    3.747076] pnp 00:03: [dma 2]
[    3.748931] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    3.752065] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    3.755242] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    3.776892] pnp: PnP ACPI: found 6 devices
[    3.894222] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    3.897751] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    3.912566] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    3.914347] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    3.916179] pci_bus 0000:00: resource 7 [mem 0x16800000-0xfebfffff window]
[    3.918207] NET: Registered protocol family 1
[    3.919735] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    3.921466] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    3.923145] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    3.924933] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    3.940766] PCI: CLS 0 bytes, default 64
[    3.942802] Unpacking initramfs...
[    8.715303] Freeing initrd memory: 26980K (d4d87000 - d67e0000)
[    8.784816] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[    8.786717] apm: overridden by ACPI.
[    8.789214] cryptomgr_test (25) used greatest stack depth: 7336 bytes left
[    8.793720] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[    8.810153] NatSemi SCx200 Driver
[    8.811973] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    8.817446] spin_lock-torture: Creating torture_shuffle task
[    8.819263] spin_lock-torture: Creating torture_stutter task
[    8.821033] spin_lock-torture: torture_shuffle task started
[    8.835980] spin_lock-torture: Creating lock_torture_writer task
[    8.836055] spin_lock-torture: torture_stutter task started
[    8.836082] spin_lock-torture: Creating lock_torture_writer task
[    8.836141] spin_lock-torture: lock_torture_writer task started
[    8.836192] spin_lock-torture: Creating lock_torture_stats task
[    8.836261] spin_lock-torture: lock_torture_writer task started
[    8.839946] torture_init_begin: refusing rcu init: spin_lock running
[    8.839946] futex hash table entries: 256 (order: 2, 16384 bytes)
[    8.841390] spin_lock-torture: lock_torture_stats task started
[    8.889045] workingset: timestamp_bits=12 max_order=17 bucket_order=5
[    9.246575] zbud: loaded
[    9.306022] fuse init (API version 7.24)
[    9.316714] JFS: nTxBlock = 2495, nTxLock = 19965
[    9.319559] SGI XFS with security attributes, realtime, debug enabled
[    9.359305] NILFS version 2 loaded
[    9.370914] OCFS2 User DLM kernel interface loaded
[    9.409937] Key type big_key registered
[    9.411567] cryptomgr_test (55) used greatest stack depth: 7024 bytes left
[    9.416897] cryptomgr_test (72) used greatest stack depth: 6896 bytes left
[    9.430401] NET: Registered protocol family 38
[    9.434304] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    9.437016] io scheduler noop registered
[    9.445056] io scheduler deadline registered (default)
[    9.450209] io scheduler cfq registered
[    9.461846] test_hexdump: all 1184 tests passed
[    9.466989] test_firmware: interface ready
[    9.471525] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    9.473396] Test 00:
[    9.478633]   Adding 50000 keys
[    9.592159]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    9.675191]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    9.691163]   Deleting 50000 keys
[    9.761367]   Duration of test: 281427306 ns
[    9.762984] Test 01:
[    9.765203]   Adding 50000 keys
[    9.769457] tsc: Refined TSC clocksource calibration: 2693.511 MHz
[    9.797399] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d34cd9d8f, max_idle_ns: 440795321039 ns
[    9.902639] Info: encountered resize
[    9.910011]   Traversal complete: counted=50070, nelems=50000, entries=50000, table-jumps=1
[    9.914770] Test failed: Total count mismatch ^^^
[    9.994146]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   10.002092]   Deleting 50000 keys
[   10.040208]   Duration of test: 273674187 ns
[   10.041920] Test 02:
[   10.044104]   Adding 50000 keys
[   10.110949]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   10.158381]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   10.161530]   Deleting 50000 keys
[   10.194433]   Duration of test: 149101408 ns
[   10.196164] Test 03:
[   10.198515]   Adding 50000 keys
[   10.273064] Info: encountered resize
[   10.279796]   Traversal complete: counted=53435, nelems=50000, entries=50000, table-jumps=1
[   10.283002] Test failed: Total count mismatch ^^^
[   10.318942]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   10.322770]   Deleting 50000 keys
[   10.359135]   Duration of test: 159127628 ns
[   10.360957] Average test time: 215832632
[   10.362465] Testing concurrent rhashtable access from 10 threads
[   14.868955] Started 10 threads, 0 failed
[   14.887323] test_printf: all 260 tests passed
[   15.060787] test_bitmap: all 460506 tests passed
[   15.066827] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8
[   15.068369] crc32: self tests passed, processed 225944 bytes in 712611 nsec
[   15.071004] crc32c: CRC_LE_BITS = 8
[   15.072311] crc32c: self tests passed, processed 225944 bytes in 370036 nsec
[   15.170795] crc32_combine: 8373 self tests passed
[   15.270562] crc32c_combine: 8373 self tests passed
[   15.285761] xz_dec_test: module loaded
[   15.287093] xz_dec_test: Create a device node with 'mknod xz_dec_test c 246 0' and write .xz files to it.
[   15.290435] glob: 64 self-tests passed, 0 failed
[   15.292032] rbtree testing -> 28719 cycles
[   16.487937] augmented rbtree testing -> 40789 cycles
[   18.238871] no IO addresses supplied
[   18.240692] hgafb: HGA card not detected.
[   18.255133] hgafb: probe of hgafb.0 failed with error -22
[   18.257710] usbcore: registered new interface driver udlfb
[   18.259528] usbcore: registered new interface driver smscufx
[   18.277601] uvesafb: failed to execute /sbin/v86d
[   18.279117] uvesafb: make sure that the v86d helper is installed and executable
[   18.281700] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2)
[   18.283504] uvesafb: vbe_init() failed with -22
[   18.285000] uvesafb: probe of uvesafb.0 failed with error -22
[   18.288166] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   18.312030] ACPI: Power Button [PWRF]
[   18.313875] Warning: Processor Platform Limit event detected, but not handled.
[   18.316408] Consider compiling CPUfreq support into your kernel.
[   18.848734] r3964: Philips r3964 Driver $Revision: 1.10 $
[   18.850427] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   18.921398] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   18.950920] lp: driver loaded but no devices found
[   18.952307] toshiba: not a supported Toshiba laptop
[   18.971957] ppdev: user-space parallel port driver
[   18.973562] scx200_gpio: no SCx200 gpio present
[   18.975576] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[   18.977327] platform pc8736x_gpio.0: no device found
[   18.979019] nsc_gpio initializing
[   18.980206] smapi::smapi_init, ERROR invalid usSmapiID
[   18.981646] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[   18.997670] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[   19.000338] mwave: mwavedd::mwave_init: Error: Failed to initialize
[   19.002191] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   19.006719] [drm] Initialized drm 1.1.0 20060810
[   19.009836] usbcore: registered new interface driver udl
[   19.025988] parport_pc 00:04: reported by Plug and Play ACPI
[   19.028405] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[   19.167060] lp0: using parport0 (interrupt-driven).
[   19.257608] loop: module loaded
[   19.286744] nbd: registered device at major 43
[   19.377703] null: module loaded
[   19.379001] dummy-irq: no IRQ given.  Use irq=N
[   19.380466] lkdtm: No crash points registered, enable through debugfs
[   19.403300] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[   19.406898] c2port c2port0: C2 port uc added
[   19.408430] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total)
[   19.519081] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[   19.523628] usbcore: registered new interface driver viperboard
[   19.525926] usbcore: registered new interface driver pn533
[   19.527749] NCI uart driver 'nfcmrvl_uart [0]' registered
[   19.530902] hp_sw: device handler registered
[   19.532444] emc: device handler registered
[   19.534231] alua: device handler registered
[   19.535683] osst :I: Tape driver with OnStream support version 0.99.4
[   19.535683] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   19.558783] Rounding down aligned max_sectors from 4294967295 to 4294967288
[   19.587824] mtdoops: mtd device (mtddev=name/number) must be supplied
[   19.592657] HSI/SSI char device loaded
[   19.594086] vcan: Virtual CAN interface driver
[   19.608737] mkiss: AX.25 Multikiss, Hans Albas PE1AYX
[   19.610375] YAM driver version 0.8 by F1OAT/F6FBB
[   19.621105] AX.25: bpqether driver version 004
[   19.641458] baycom_ser_fdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[   19.641458] baycom_ser_fdx: version 0.10
[   19.667117] hdlcdrv: (C) 1996-2000 Thomas Sailer HB9JNX/AE4WA
[   19.668931] hdlcdrv: version 0.8
[   19.670302] baycom_ser_hdx: (C) 1996-2000 Thomas Sailer, HB9JNX/AE4WA
[   19.670302] baycom_ser_hdx: version 0.10
[   19.686004] baycom_epp: (C) 1998-2000 Thomas Sailer, HB9JNX/AE4WA
[   19.686004] baycom_epp: version 0.7
[   19.710787] usbcore: registered new interface driver irda-usb
[   19.713410] usbcore: registered new interface driver mcs7780
[   19.715617] usbcore: registered new interface driver kingsun-sir
[   19.730695] usbcore: registered new interface driver hwa-rc
[   19.732643] usbcore: registered new interface driver i1480-dfu-usb
[   19.735628] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   19.737582] ehci-pci: EHCI PCI platform driver
[   19.739287] ehci-platform: EHCI generic platform driver
[   19.743896] usbcore: registered new interface driver hwa-hc
[   19.753929] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[   19.758857] usbcore: registered new interface driver wusb-cbaf
[   19.761411] usbcore: registered new interface driver cdc_acm
[   19.762863] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   19.765475] usbcore: registered new interface driver usblp
[   19.767141] usbcore: registered new interface driver cdc_wdm
[   19.768964] usbcore: registered new interface driver uas
[   19.770941] usbcore: registered new interface driver usb-storage
[   19.772946] usbcore: registered new interface driver ums-alauda
[   19.774956] usbcore: registered new interface driver ums-cypress
[   19.780664] usbcore: registered new interface driver ums-datafab
[   19.782670] usbcore: registered new interface driver ums_eneub6250
[   19.784676] usbcore: registered new interface driver ums-freecom
[   19.786726] usbcore: registered new interface driver ums-isd200
[   19.788674] usbcore: registered new interface driver ums-jumpshot
[   19.790781] usbcore: registered new interface driver ums-karma
[   19.792770] usbcore: registered new interface driver ums-onetouch
[   19.794812] usbcore: registered new interface driver ums-realtek
[   19.796803] usbcore: registered new interface driver ums-sddr09
[   19.801553] usbcore: registered new interface driver ums-sddr55
[   19.803277] usbcore: registered new interface driver ums-usbat
[   19.805386] usbcore: registered new interface driver mdc800
[   19.807148] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   19.810215] usbcore: registered new interface driver microtekX6
[   19.812407] usbcore: registered new interface driver usbserial
[   19.817978] usbcore: registered new interface driver usbserial_generic
[   19.820104] usbserial: USB Serial support registered for generic
[   19.822117] usbcore: registered new interface driver aircable
[   19.824076] usbserial: USB Serial support registered for aircable
[   19.826138] usbcore: registered new interface driver ark3116
[   19.828064] usbserial: USB Serial support registered for ark3116
[   19.830134] usbcore: registered new interface driver belkin_sa
[   19.835921] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[   19.839128] usbcore: registered new interface driver ch341
[   19.840974] usbserial: USB Serial support registered for ch341-uart
[   19.843026] usbcore: registered new interface driver cp210x
[   19.844887] usbserial: USB Serial support registered for cp210x
[   19.846911] usbcore: registered new interface driver cyberjack
[   19.848845] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[   19.851978] usbcore: registered new interface driver digi_acceleport
[   19.853989] usbserial: USB Serial support registered for Digi 2 port USB adapter
[   19.860586] usbserial: USB Serial support registered for Digi 4 port USB adapter
[   19.863497] usbcore: registered new interface driver empeg
[   19.865451] usbserial: USB Serial support registered for empeg
[   19.867339] usbcore: registered new interface driver ftdi_sio
[   19.878547] usbserial: USB Serial support registered for FTDI USB Serial Device
[   19.881411] usbcore: registered new interface driver garmin_gps
[   19.883304] usbserial: USB Serial support registered for Garmin GPS usb/tty
[   19.885455] usbcore: registered new interface driver ipaq
[   19.887276] usbserial: USB Serial support registered for PocketPC PDA
[   19.889303] usbcore: registered new interface driver ipw
[   19.900327] usbserial: USB Serial support registered for IPWireless converter
[   19.902473] usbcore: registered new interface driver ir_usb
[   19.904354] usbserial: USB Serial support registered for IR Dongle
[   19.906322] usbcore: registered new interface driver keyspan
[   19.908201] usbserial: USB Serial support registered for Keyspan - (without firmware)
[   19.923969] usbserial: USB Serial support registered for Keyspan 1 port adapter
[   19.926799] usbserial: USB Serial support registered for Keyspan 2 port adapter
[   19.929661] usbserial: USB Serial support registered for Keyspan 4 port adapter
[   19.932502] usbcore: registered new interface driver keyspan_pda
[   19.947321] usbserial: USB Serial support registered for Keyspan PDA
[   19.949216] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration)
[   19.951788] usbserial: USB Serial support registered for Xircom / Entrega PGS - (prerenumeration)
[   19.954894] usbcore: registered new interface driver kl5kusb105
[   19.956849] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
[   19.964468] usbcore: registered new interface driver mos7720
[   19.972637] usbserial: USB Serial support registered for Moschip 2 port adapter
[   19.975457] usbcore: registered new interface driver mos7840
[   19.977385] usbserial: USB Serial support registered for Moschip 7840/7820 USB Serial Driver
[   19.980392] usbcore: registered new interface driver navman
[   19.995422] usbserial: USB Serial support registered for navman
[   19.997420] usbcore: registered new interface driver opticon
[   19.999269] usbserial: USB Serial support registered for opticon
[   20.001213] usbcore: registered new interface driver option
[   20.003079] usbserial: USB Serial support registered for GSM modem (1-port)
[   20.005192] usbcore: registered new interface driver oti6858
[   20.007106] usbserial: USB Serial support registered for oti6858
[   20.035225] usbcore: registered new interface driver pl2303
[   20.037137] usbserial: USB Serial support registered for pl2303
[   20.039037] usbcore: registered new interface driver qcserial
[   20.040933] usbserial: USB Serial support registered for Qualcomm USB modem
[   20.059265] usbcore: registered new interface driver quatech2
[   20.061183] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver
[   20.064240] usbcore: registered new interface driver safe_serial
[   20.066183] usbserial: USB Serial support registered for safe_serial
[   20.082580] usbcore: registered new interface driver spcp8x5
[   20.102452] usbserial: USB Serial support registered for SPCP8x5
[   20.104431] usbcore: registered new interface driver ssu100
[   20.106315] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver
[   20.109342] usbcore: registered new interface driver symbolserial
[   20.129678] usbserial: USB Serial support registered for symbol
[   20.131604] usbcore: registered new interface driver visor
[   20.133509] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[   20.136419] usbserial: USB Serial support registered for Sony Clie 5.0
[   20.138458] usbserial: USB Serial support registered for Sony Clie 3.5
[   20.140520] usbcore: registered new interface driver wishbone_serial
[   20.161691] usbserial: USB Serial support registered for wishbone_serial
[   20.163749] usbcore: registered new interface driver adutux
[   20.165927] usbcore: registered new interface driver appledisplay
[   20.167853] usbcore: registered new interface driver cypress_cy7c63
[   20.179089] usbcore: registered new interface driver cytherm
[   20.184221] usbcore: registered new interface driver idmouse
[   20.186215] usbcore: registered new interface driver ldusb
[   20.191500] usbcore: registered new interface driver legousbtower
[   20.195555] usbcore: registered new interface driver rio500
[   20.199421] usbcore: registered new interface driver usbtest
[   20.204451] usbcore: registered new interface driver usb_ehset_test
[   20.208789] usbcore: registered new interface driver trancevibrator
[   20.214220] usbcore: registered new interface driver uss720
[   20.217989] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[   20.223905] uss720: NOTE: this is a special purpose driver to allow nonstandard
[   20.228394] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[   20.233927] uss720: If you just want to connect to a printer, use usblp instead
[   20.272770] usbcore: registered new interface driver usbsevseg
[   20.278107] usbcore: registered new interface driver yurex
[   20.286124] udc-core: couldn't find an available UDC - added [g_cdc] to list of pending drivers
[   20.292363] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   20.302243] serio: i8042 KBD port at 0x60,0x64 irq 1
[   20.308005] serio: i8042 AUX port at 0x60,0x64 irq 12
[   20.312752] parport0: cannot grant exclusive access for device parkbd
[   20.421214] mousedev: PS/2 mouse device common for all mice
[   20.425341] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   20.428976] usbcore: registered new interface driver appletouch
[   20.429154] usbcore: registered new interface driver bcm5974
[   20.439980] usbcore: registered new interface driver synaptics_usb
[   20.455607] usbcore: registered new interface driver iforce
[   20.470217] usbcore: registered new interface driver aiptek
[   20.474415] usbcore: registered new interface driver hanwang
[   20.484632] usbcore: registered new interface driver kbtab
[   20.504202] mk712: device not present
[   20.510084] usbcore: registered new interface driver usbtouchscreen
[   20.520020] apanel: Fujitsu BIOS signature 'FJKEYINF' not found...
[   20.524412] usbcore: registered new interface driver ati_remote2
[   20.532341] usbcore: registered new interface driver keyspan_remote
[   20.540502] input: PC Speaker as /devices/platform/pcspkr/input/input4
[   20.546060] usbcore: registered new interface driver powermate
[   20.552363] wistron_btns: System unknown
[   20.556351] usbcore: registered new interface driver yealink
[   20.560737] i2c /dev entries driver
[   20.563497] usbcore: registered new interface driver i2c-diolan-u2c
[   20.565673] i2c-parport-light: adapter type unspecified
[   20.568168] usbcore: registered new interface driver i2c-tiny-usb
[   20.571354] pps pps0: new PPS source ktimer
[   20.573620] pps pps0: ktimer PPS source registered
[   20.575462] pps_ldisc: PPS line discipline registered
[   20.578196] pps_parport: parallel port PPS client
[   20.580017] parport0: cannot grant exclusive access for device pps_parport
[   20.582217] pps_parport: couldn't register with parport0
[   20.584647] Driver for 1-wire Dallas network protocol.
[   20.587316] usbcore: registered new interface driver DS9490R
[   20.589950] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko
[   20.592487] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[   20.597358] __power_supply_register: Expected proper parent device for 'test_ac'
[   20.601762] __power_supply_register: Expected proper parent device for 'test_battery'
[   20.607055] ------------[ cut here ]------------
[   20.612928] WARNING: CPU: 0 PID: 1 at fs/sysfs/group.c:61 internal_create_group+0x1e4/0x420
[   20.627436] BUG: unable to handle kernel paging request at 6c756d65
[   20.629794] IP: [<c1685a0c>] string+0x2c/0xb0
[   20.631621] *pdpt = 0000000000000000 *pde = 0000000000000000 
[   20.634330] Oops: 0000 [#1] PREEMPT SMP 
[   20.638711] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc6-00055-g1c3ceab #1
[   20.641928] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   20.645710] task: d42d8040 ti: d42d4000 task.ti: d42d4000
[   20.647635] EIP: 0060:[<c1685a0c>] EFLAGS: 00010086 CPU: 0
[   20.655603] EIP is at string+0x2c/0xb0
[   20.657415] EAX: c2e111ca EBX: d42d5de8 ECX: 6c756d65 EDX: ffffffff
[   20.660981] ESI: fffffffe EDI: ffff0a00 EBP: d42d5cdc ESP: d42d5cbc
[   20.663074]  DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[   20.665387] CR0: 80050033 CR2: 6c756d65 CR3: 02899000 CR4: 000406f0
[   20.670149] Stack:
[   20.671374]  c10b44a9 00000282 ffff0a00 ffffff04 c2e115a0 d42d5de8 c23d5bcc c2e111ca
[   20.676025]  d42d5d18 c168710a ffffff04 ffff0a00 00000000 00000001 c2e111c0 000003e0
[   20.680279]  00000002 c2e115a0 ffffff04 ffff0a00 00000000 000003e0 00000000 d42d5d2c
[   20.687079] Call Trace:
[   20.688916]  [<c10b44a9>] ? do_raw_spin_unlock+0xc9/0x100
[   20.690756]  [<c168710a>] vsnprintf+0x1fa/0x410
[   20.692577]  [<c16877c7>] vscnprintf+0x17/0x50
[   20.698734]  [<c10c4bde>] vprintk_emit+0x2fe/0x560
[   20.700766]  [<c125a724>] ? internal_create_group+0x1e4/0x420
[   20.702701]  [<c10c4e7d>] vprintk+0x3d/0x40
[   20.717325]  [<c10623c8>] __warn+0xa8/0x100
[   20.720974]  [<c125a724>] ? internal_create_group+0x1e4/0x420
[   20.723777]  [<c106245b>] warn_slowpath_fmt+0x3b/0x40
[   20.727559]  [<c125a724>] internal_create_group+0x1e4/0x420
[   20.731361]  [<c125aa69>] sysfs_create_groups+0x39/0x90
[   20.734687]  [<c181c1f5>] device_add+0x5d5/0x610
[   20.737403]  [<c182d0ac>] ? pm_runtime_init+0xfc/0x110
[   20.741928]  [<c181c327>] device_register+0x17/0x20
[   20.744590]  [<c1bb1f78>] thermal_zone_device_register+0x178/0x840
[   20.748612]  [<c1b4d103>] __power_supply_register+0x273/0x3a0
[   20.752551]  [<c1b4d5b7>] power_supply_register+0x17/0x20
[   20.757049]  [<c27d4858>] test_power_init+0x21/0xa0
[   20.759699]  [<c27d4837>] ? wm831x_power_driver_init+0x11/0x11
[   20.763614]  [<c277fc78>] do_one_initcall+0xf7/0x1b8
[   20.767399]  [<c10b44a9>] ? do_raw_spin_unlock+0xc9/0x100
[   20.770765]  [<c277fea9>] ? kernel_init_freeable+0x170/0x214
[   20.777180]  [<c277fec5>] kernel_init_freeable+0x18c/0x214
[   20.795488]  [<c1ef2260>] kernel_init+0x10/0x110
[   20.800411]  [<c1efb289>] ret_from_kernel_thread+0x21/0x38
[   20.806318]  [<c1ef2250>] ? rest_init+0xb0/0xb0
[   20.812016] Code: 89 e5 57 56 53 83 ec 14 8b 7d 0c 8b 75 08 89 55 f0 89 fa 89 75 ec 89 7d e8 c1 fa 10 81 f9 ff 0f 00 00 8d 72 ff 76 58 85 d2 74 46 <0f> b6 19 8d 79 01 84 db 75 1a eb 3a 90 8d b4 26 00 00 00 00 83
[   20.840640] EIP: [<c1685a0c>] string+0x2c/0xb0 SS:ESP 0068:d42d5cbc
[   20.844714] CR2: 000000006c756d65
[   20.848276] ---[ end trace c01e283b9f8d84d6 ]---
[   20.850775] Kernel panic - not syncing: Fatal exception
[   20.853974] Kernel Offset: disabled

Elapsed time: 50
qemu-system-i386 -enable-kvm -cpu Haswell,+smep,+smap -kernel /pkg/linux/i386-randconfig-x0-05310913/gcc-6/1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5/vmlinuz-4.6.0-rc6-00055-g1c3ceab -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-41/bisect_boot-1-quantal-core-i386.cgz-i386-randconfig-x0-05310913-1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5-20160531-120469-1d4e5q5-0.yaml ARCH=i386 kconfig=i386-randconfig-x0-05310913 branch=linux-devel/devel-catchup-201605311016 commit=1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5 BOOT_IMAGE=/pkg/linux/i386-randconfig-x0-05310913/gcc-6/1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5/vmlinuz-4.6.0-rc6-00055-g1c3ceab max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-x0-05310913/gcc-6/1c3ceab5a8e7bcd807696d94f8863dd4e400c8c5/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-i386-41::dhcp drbd.minor_count=8'  -initrd /fs/sde1/initrd-vm-vp-quantal-i386-41 -m 360 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-41 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-i386-41 -daemonize -display none -monitor null 
