early console in setup code
early console in decompress_kernel
input_data: 0x0000000003b343b4
input_len: 0x00000000010f2950
output: 0x0000000001000000
output_len: 0x0000000003c12878
run_size: 0x0000000003d0a000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.6.0-rc2-00006-g1235bae (kbuild@lkp-ib03) (gcc version 6.1.1 20160430 (Debian 6.1.1-1) ) #3 SMP Fri Jun 10 08:35:38 CST 2016
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-17/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-06100451-1235baeac82d3113a7334f55a3fef160c5a4b983-20160610-77925-1xs3hv7-0.yaml~ ARCH=x86_64 kconfig=x86_64-randconfig-s3-06100451 branch=linux-devel/devel-spot-201606100535 commit=1235baeac82d3113a7334f55a3fef160c5a4b983 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/vmlinuz-4.6.0-rc2-00006-g1235bae max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-17::dhcp drbd.minor_count=8
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x048e5000, 0x048e5fff] PGTABLE
[    0.000000] BRK [0x048e6000, 0x048e6fff] PGTABLE
[    0.000000] BRK [0x048e7000, 0x048e7fff] PGTABLE
[    0.000000] BRK [0x048e8000, 0x048e8fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x14efe000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6410 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E1737 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: SSDT 0x00000000167E0C88 0009F7 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x00000000167E167F 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000167dffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x14efa000-0x14efdfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:14ef9001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 8283979144 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000167dffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1376 pages used for memmap
[    0.000000]   DMA32 zone: 88032 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 28 pages/cpu @ffff880014c00000 s85760 r0 d28928 u1048576
[    0.000000] pcpu-alloc: s85760 r0 d28928 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 14c0c640
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 90569
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-17/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-06100451-1235baeac82d3113a7334f55a3fef160c5a4b983-20160610-77925-1xs3hv7-0.yaml~ ARCH=x86_64 kconfig=x86_64-randconfig-s3-06100451 branch=linux-devel/devel-spot-201606100535 commit=1235baeac82d3113a7334f55a3fef160c5a4b983 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/vmlinuz-4.6.0-rc2-00006-g1235bae max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-17::dhcp drbd.minor_cou
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 277644K/368120K available (28155K kernel code, 20908K rwdata, 5272K rodata, 1648K init, 840K bss, 90476K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:4352 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 4.6.0-rc2-00006-g1235bae (kbuild@lkp-ib03) (gcc version 6.1.1 20160430 (Debian 6.1.1-1) ) #3 SMP Fri Jun 10 08:35:38 CST 2016
[    0.000000] Command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-17/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-06100451-1235baeac82d3113a7334f55a3fef160c5a4b983-20160610-77925-1xs3hv7-0.yaml~ ARCH=x86_64 kconfig=x86_64-randconfig-s3-06100451 branch=linux-devel/devel-spot-201606100535 commit=1235baeac82d3113a7334f55a3fef160c5a4b983 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/vmlinuz-4.6.0-rc2-00006-g1235bae max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-17::dhcp drbd.minor_count=8
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: PAT not supported by CPU.
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x048e5000, 0x048e5fff] PGTABLE
[    0.000000] BRK [0x048e6000, 0x048e6fff] PGTABLE
[    0.000000] BRK [0x048e7000, 0x048e7fff] PGTABLE
[    0.000000] BRK [0x048e8000, 0x048e8fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x14efe000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6410 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E1737 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: SSDT 0x00000000167E0C88 0009F7 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x00000000167E167F 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x00000000167dffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x14efa000-0x14efdfff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:14ef9001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 8283979144 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000167dffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1376 pages used for memmap
[    0.000000]   DMA32 zone: 88032 pages, LIFO batch:15
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 28 pages/cpu @ffff880014c00000 s85760 r0 d28928 u1048576
[    0.000000] pcpu-alloc: s85760 r0 d28928 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 14c0c640
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 90569
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-17/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-06100451-1235baeac82d3113a7334f55a3fef160c5a4b983-20160610-77925-1xs3hv7-0.yaml~ ARCH=x86_64 kconfig=x86_64-randconfig-s3-06100451 branch=linux-devel/devel-spot-201606100535 commit=1235baeac82d3113a7334f55a3fef160c5a4b983 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/vmlinuz-4.6.0-rc2-00006-g1235bae max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-17::dhcp drbd.minor_cou
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 277644K/368120K available (28155K kernel code, 20908K rwdata, 5272K rodata, 1648K init, 840K bss, 90476K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:4352 nr_irqs:440 16
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] console [ttyS0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.231164] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=10774032)
[    0.233138] pid_max: default: 32768 minimum: 301
[    0.234167] ACPI: Core revision 20160108
[    0.263217] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.264484] 
[    0.265251] Security Framework initialized
[    0.266354] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.268616] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.270379] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.271686] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.273747] mce: CPU supports 10 MCE banks
[    0.274725] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.276154] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.280177] Freeing SMP alternatives memory: 36K (ffffffff84809000 - ffffffff84812000)
[    0.287552] smpboot: Max logical packages: 2
[    0.288818] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.290035] smpboot: APIC(1) Converting physical 1 to logical package 1
[    0.291338] enabled ExtINT on CPU#0
[    0.292902] ENABLING IO-APIC IRQs
[    0.293811] init IO_APIC IRQs
[    0.294815]  apic 0 pin 0 not connected
[    0.296292] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.298584] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.300394] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.302202] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.304141] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.306200] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.308026] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.309932] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.311782] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.313662] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.315564] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.317378] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.319272] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.321109] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.323011] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.325101]  apic 0 pin 16 not connected
[    0.326336]  apic 0 pin 17 not connected
[    0.327318]  apic 0 pin 18 not connected
[    0.328273]  apic 0 pin 19 not connected
[    0.329180]  apic 0 pin 20 not connected
[    0.330160]  apic 0 pin 21 not connected
[    0.331284]  apic 0 pin 22 not connected
[    0.332254]  apic 0 pin 23 not connected
[    0.333329] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.334898] Using local APIC timer interrupts.
[    0.334898] calibrating APIC timer ...
[    0.449495] ... lapic delta = 6500232
[    0.450602] ... PM-Timer delta = 372274
[    0.451711] APIC calibration not consistent with PM-Timer: 104ms instead of 100ms
[    0.453853] APIC delta adjusted to PM-Timer: 6250192 (6500232)
[    0.455303] TSC delta adjusted to PM-Timer: 269340892 (280115913)
[    0.456761] ..... delta 6250192
[    0.457792] ..... mult: 268443702
[    0.458860] ..... calibration result: 4000122
[    0.460051] ..... CPU clock speed is 2693.1635 MHz.
[    0.462032] ..... host bus clock speed is 1000.0122 MHz.
[    0.463623] smpboot: CPU0: Intel QEMU Virtual CPU version 2.4.0 (family: 0x6, model: 0x6, stepping: 0x3)
[    0.466460] Performance Events: Broken PMU hardware detected, using software events only.
[    0.483287] x86: Booting SMP configuration:
[    0.484480] .... node  #0, CPUs:      #1
[    0.485477] kvm-clock: cpu 1, msr 0:14ef9041, secondary cpu clock
[    0.486547] masked ExtINT on CPU#1
[    0.507354] KVM setup async PF for cpu 1
[    0.509192] kvm-stealtime: cpu 1, msr 14d0c640
[    0.510696] x86: Booted up 1 node, 2 CPUs
[    0.512279] smpboot: Total of 2 processors activated (10774.03 BogoMIPS)
[    0.517049] devtmpfs: initialized
[    0.519583] x86/mm: Memory block size: 128MB
[    0.560725] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.563950] xor: measuring software checksum speed
[    0.603626]    prefetch64-sse:  9917.000 MB/sec
[    0.647644]    generic_sse:  9893.000 MB/sec
[    0.651420] xor: using function: prefetch64-sse (9917.000 MB/sec)
[    0.657416] prandom: seed boundary self test passed
[    0.661198] prandom: 100 self tests passed
[    0.664989] NET: Registered protocol family 16
[    0.679642] cpuidle: using governor ladder
[    0.682857] ACPI: bus type PCI registered
[    0.684905] PCI: Using configuration type 1 for base access
[    0.827637] raid6: sse2x1   gen()  1716 MB/s
[    0.895645] raid6: sse2x1   xor()   824 MB/s
[    0.963644] raid6: sse2x2   gen()  2741 MB/s
[    1.031651] raid6: sse2x2   xor()  1539 MB/s
[    1.099655] raid6: sse2x4   gen()  3949 MB/s
[    1.167645] raid6: sse2x4   xor()  2254 MB/s
[    1.169045] raid6: using algorithm sse2x4 gen() 3949 MB/s
[    1.170600] raid6: .... xor() 2254 MB/s, rmw enabled
[    1.172087] raid6: using intx1 recovery algorithm
[    1.174977] ACPI: Added _OSI(Module Device)
[    1.176379] ACPI: Added _OSI(Processor Device)
[    1.177793] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.179236] ACPI: Added _OSI(Processor Aggregator Device)
[    1.197772] ACPI: Interpreter enabled
[    1.199184] ACPI: (supports S0 S3 S5)
[    1.200492] ACPI: Using IOAPIC for interrupt routing
[    1.202176] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.281151] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.282888] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    1.284778] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.294205] PCI host bridge to bus 0000:00
[    1.295621] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.297418] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.299195] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.301705] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[    1.304198] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.305837] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.310122] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.314548] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    1.320222] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    1.323381] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    1.325217] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    1.327248] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    1.329087] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    1.333035] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    1.335234] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    1.337711] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    1.341922] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    1.345238] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    1.350014] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    1.357825] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    1.362090] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    1.364830] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    1.367946] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    1.375977] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    1.380736] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    1.383076] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    1.399357] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.403201] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.406965] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.410728] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.413650] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.420742] ACPI: Enabled 16 GPEs in block 00 to 0F
[    1.425771] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.427589] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.430383] vgaarb: loaded
[    1.431590] vgaarb: bridge control possible 0000:00:02.0
[    1.436336] pps_core: LinuxPPS API ver. 1 registered
[    1.437832] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.441157] Unable to find dmi tokens
[    1.442613] wmi: Mapper loaded
[    1.444543] FPGA manager framework
[    1.445888] PCI: Using ACPI for IRQ routing
[    1.447252] PCI: pci_cache_line_size set to 64 bytes
[    1.448899] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.450567] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[    1.456457] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    1.458542] clocksource: Switched to clocksource kvm-clock
[    1.529408] FS-Cache: Loaded
[    1.531128] CacheFiles: Loaded
[    1.532876] pnp: PnP ACPI init
[    1.534940] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.537369] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.558152] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.560727] pnp 00:03: [dma 2]
[    1.562525] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.565539] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.568258] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.574560] pnp: PnP ACPI: found 6 devices
[    1.609861] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.613011] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.614747] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.616400] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.618136] pci_bus 0000:00: resource 7 [mem 0x16800000-0xfebfffff window]
[    1.619997] NET: Registered protocol family 1
[    1.621422] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.623041] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.624664] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.626380] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.629038] PCI: CLS 0 bytes, default 64
[    1.630802] Trying to unpack rootfs image as initramfs...
[    4.355456] Freeing initrd memory: 25480K (ffff880014efe000 - ffff8800167e0000)
[    4.360690] Scanning for low memory corruption every 60 seconds
[    4.365154] PCLMULQDQ-NI instructions are not detected.
[    4.366362] AVX or AES-NI instructions are not detected.
[    4.367516] CPU feature 'AVX registers' is not supported.
[    4.368614] CPU feature 'AVX registers' is not supported.
[    4.369692] CPU feature 'AVX registers' is not supported.
[    4.370758] AVX2 instructions are not detected.
[    4.373463] futex hash table entries: 512 (order: 3, 32768 bytes)
[    4.377261] workingset: timestamp_bits=54 max_order=17 bucket_order=0
[    4.411427] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    4.414604] ntfs: driver 2.1.32 [Flags: R/W].
[    4.421300] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    4.422924] QNX4 filesystem 0.2.3 registered.
[    4.426029] NILFS version 2 loaded
[    4.426946] befs: version: 0.9.3
[    4.431113] gfs2: GFS2 installed
[    4.448158] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    4.450798] io scheduler noop registered
[    4.452235] io scheduler deadline registered (default)
[    4.454849] io scheduler cfq registered
[    4.456263] test_string_helpers: Running tests...
[    4.467022] test_hexdump: all 1184 tests passed
[    4.468947] test_firmware: interface ready
[    4.471653] test_printf: all 260 tests passed
[    4.602605] test_bitmap: all 460506 tests passed
[    4.608101] crc32: CRC_LE_BITS = 8, CRC_BE BITS = 8
[    4.609124] crc32: self tests passed, processed 225944 bytes in 2065191 nsec
[    4.612392] crc32c: CRC_LE_BITS = 8
[    4.613247] crc32c: self tests passed, processed 225944 bytes in 992885 nsec
[    4.759680] crc32_combine: 8373 self tests passed
[    4.924355] crc32c_combine: 8373 self tests passed
[    4.926161] xz_dec_test: module loaded
[    4.927543] xz_dec_test: Create a device node with 'mknod xz_dec_test c 248 0' and write .xz files to it.
[    4.931602] gpio_it87: no device
[    4.935025] rivafb_setup START
[    4.936418] VIA Graphics Integration Chipset framebuffer 2.4 initializing
[    4.939019] ipmi message handler version 39.2
[    4.940055] ipmi device interface
[    4.941033] IPMI System Interface driver.
[    4.942129] ipmi_si: Unable to find any System Interface(s)
[    4.943259] IPMI SSIF Interface driver
[    4.944224] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    4.946575] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    4.948466] ACPI: Power Button [PWRF]
[    4.952277] ERST DBG: ERST support is disabled.
[    5.067320] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    5.092716] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    5.101676] MOXA Intellio family driver version 6.0k
[    5.103371] MOXA Smartio/Industio family driver version 2.0.5
[    5.105173] Initializing Nozomi driver 2.1d
[    5.106749] SyncLink MultiPort driver $Revision: 4.38 $
[    5.276038] SyncLink MultiPort driver $Revision: 4.38 $, tty major#238
[    5.277273] SyncLink serial driver $Revision: 4.38 $
[    5.305494] SyncLink serial driver $Revision: 4.38 $, tty major#237
[    5.307133] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    5.308402] ac.o: No PCI boards found.
[    5.309271] ac.o: For an ISA board you must supply memory and irq parameters.
[    5.310727] Non-volatile memory driver v1.3
[    5.312059] smapi::smapi_init, ERROR invalid usSmapiID
[    5.313080] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    5.314933] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    5.316582] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    5.317728] Linux agpgart interface v0.103
[    5.318644] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    5.321575] [drm] Initialized drm 1.1.0 20060810
[    5.322782] [drm] radeon kernel modesetting enabled.
[    5.325857] [drm] Found bochs VGA, ID 0xb0c0.
[    5.326796] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000.
[    5.328230] [TTM] Zone  kernel: Available graphics memory: 151580 kiB
[    5.329391] [TTM] Initializing pool allocator
[    5.330377] [TTM] Initializing DMA pool allocator
[    5.332044] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1
[    5.334583] parport_pc 00:04: reported by Plug and Play ACPI
[    5.335941] parport0: PC-style at 0x378, irq 7 [PCSPP(,...)]
[    5.339902] Failed to find cpu0 device node
[    5.340834] Unable to detect cache hierarchy from DT for CPU 0
[    5.344098] Floppy drive(s): fd0 is 1.44M
[    5.363476] tsc: Refined TSC clocksource calibration: 2693.511 MHz
[    5.365213] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d34cd9d8f, max_idle_ns: 440795321039 ns
[    5.548087] FDC 0 is a S82078B
[    5.617917] brd: module loaded
[    5.628869] loop: module loaded
[    5.630112] MM: desc_per_page = 128
[    5.631150] mtip32xx Version 1.3.1
[    5.635882] null: module loaded
[    5.636804] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[    5.638133] dummy-irq: no IRQ given.  Use irq=N
[    5.639372] Phantom Linux Driver, version n0.9.8, init OK
[    5.641610] Guest personality initialized and is inactive
[    5.642893] VMCI host device registered (name=vmci, major=10, minor=59)
[    5.644106] Initialized host personality
[    5.760859] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[    5.766358] Uniform Multi-Platform E-IDE driver
[    5.774792] ide_generic: please use "probe_mask=0x3f" module parameter for probing all legacy ISA IDE ports
[    5.778089] ide-cd driver 5.00
[    5.799507] mtdoops: mtd device (mtddev=name/number) must be supplied
[    5.801534] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue
[    5.804365] device id = 2440
[    5.805639] device id = 2480
[    5.806916] device id = 24c0
[    5.811450] device id = 24d0
[    5.812434] device id = 25a1
[    5.813281] device id = 2670
[    5.814634] platform physmap-flash.0: failed to claim resource 0
[    5.816121] SBC-GXx flash: IO:0x258-0x259 MEM:0xdc000-0xdffff
[    5.817785] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[    5.819940] pmc551: not detected
[    5.853928] No valid DiskOnChip devices found
[    5.856261] parport0: cannot grant exclusive access for device spi-lm70llp
[    5.857508] spi_lm70llp: spi_lm70llp probe fail, status -12
[    5.859714] VFIO - User Level meta-driver version: 0.3
[    5.861554] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    5.864370] serio: i8042 KBD port at 0x60,0x64 irq 1
[    5.865988] serio: i8042 AUX port at 0x60,0x64 irq 12
[    5.868445] parport0: cannot grant exclusive access for device parkbd
[    5.872695] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[    5.879130] mk712: device not present
[    5.881700] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    5.882163] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    5.890398] i2c /dev entries driver
[    5.893881] i2c-parport: adapter type unspecified
[    5.895463] i2c-parport-light: adapter type unspecified
[    5.897904] pps pps0: new PPS source ktimer
[    5.899390] pps pps0: ktimer PPS source registered
[    5.900973] pps_ldisc: PPS line discipline registered
[    5.902707] Driver for 1-wire Dallas network protocol.
[    5.904885] 1-Wire driver for the DS2760 battery monitor chip - (c) 2004-2005, Szabolcs Gyurko
[    5.908066] __power_supply_register: Expected proper parent device for 'test_ac'
[    5.911184] __power_supply_register: Expected proper parent device for 'test_battery'
[    5.915462] thermal thermal_zone0: failed to read out thermal zone (-19)
[    5.917370] __power_supply_register: Expected proper parent device for 'test_usb'
[    5.923936] applesmc: supported laptop not found!
[    5.925471] applesmc: driver init failed (ret=-19)!
[    5.932264] pc87360: PC8736x not detected, module not inserted
[    5.936618] intel_powerclamp: Intel powerclamp does not run on family 6 model 6
[    5.956597] sdhci: Secure Digital Host Controller Interface driver
[    5.958022] sdhci: Copyright(c) Pierre Ossman
[    5.959294] sdhci-pltfm: SDHCI platform and OF driver helper
[    5.962294] ledtrig-cpu: registered to indicate activity on CPUs
[    5.964099] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[    5.968248] vme_user: VME User Space Access Driver
[    5.969256] vme_user: No cards, skipping registration
[    5.970289] vme_pio2: No cards, skipping registration
[    5.971321] no options.
[    5.972683] input: Speakup as /devices/virtual/input/input3
[    5.974043] evbug: Connected device: input3 (Speakup at speakup/input0)
[    5.975786] initialized device: /dev/synth, node (MAJOR 10, MINOR 25)
[    5.977010] speakup 3.1.6: initialized
[    5.977907] synth name on entry is: (null)
[    5.979247] FPGA DOWNLOAD --->
[    5.980078] FPGA image file name: xlinx_fpga_firmware.bit
[    5.981372] GPIO INIT FAIL!!
[    6.036609] acerhdf: Acer Aspire One Fan driver, v.0.7.0
[    6.038483] acerhdf: unknown (unsupported) BIOS version QEMU/Standard PC (i440FX + PIIX, 1996)/Debian-1.8.2-1, please report, aborting!
[    6.041401] Initializing HPQ6001 module
[    6.042410] hdaps: supported laptop not found!
[    6.043376] hdaps: driver init failed (ret=-19)!
[    6.044391] msi_wmi: This machine doesn't have neither MSI-hotkeys nor backlight through WMI
[    6.047601] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0
[    6.048772] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0
[    6.050081] Software Queue-Pair Transport over NTB, version 4
[    6.051662] intel_rapl: driver does not support CPU family 6 model 6
[    6.055801] oprofile: using NMI interrupt.
[    6.058786] ... APIC ID:      00000000 (0)
[    6.059707] ... APIC VERSION: 01050014
[    6.060599] 0000000000000000000000000000000000000000000000000000000000000000
[    6.062441] 0000000000000000000000000000000000000000000000000000000000000000
[    6.065175] 0000000000000000000000000000000000000000000000000000000000008000
[    6.067322] 
[    6.067981] number of MP IRQ sources: 15.
[    6.068887] number of IO-APIC #0 registers: 24.
[    6.069845] testing the IO APIC.......................
[    6.070873] IO APIC #0......
[    6.071650] .... register #00: 00000000
[    6.072544] .......    : physical APIC id: 00
[    6.073488] .......    : Delivery Type: 0
[    6.074397] .......    : LTS          : 0
[    6.075296] .... register #01: 00170011
[    6.076194] .......     : max redirection entries: 17
[    6.077205] .......     : PRQ implemented: 0
[    6.078142] .......     : IO APIC version: 11
[    6.079086] .... register #02: 00000000
[    6.079982] .......     : arbitration: 00
[    6.080887] .... IRQ redirection table:
[    6.081772] IOAPIC 0:
[    6.082499]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.084245]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(03), M(1)
[    6.085973]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(03), M(1)
[    6.087813]  pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(03), M(1)
[    6.089541]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(03), M(1)
[    6.091282]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(03), M(1)
[    6.093022]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(03), M(1)
[    6.095038]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(03), M(1)
[    6.097780]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(03), M(1)
[    6.100518]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(03), M(1)
[    6.103234]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(03), M(1)
[    6.106509]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(03), M(1)
[    6.109245]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(03), M(1)
[    6.111060]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(03), M(1)
[    6.112805]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(03), M(1)
[    6.114553]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(03), M(1)
[    6.116279]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.118036]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.119768]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.121525]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.123251]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.124993]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.126721]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.128472]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    6.130172] IRQ to pin mappings:
[    6.131002] IRQ0 -> 0:2
[    6.131895] IRQ1 -> 0:1
[    6.132784] IRQ3 -> 0:3
[    6.133671] IRQ4 -> 0:4
[    6.134843] IRQ5 -> 0:5
[    6.135733] IRQ6 -> 0:6
[    6.136631] IRQ7 -> 0:7
[    6.137513] IRQ8 -> 0:8
[    6.138395] IRQ9 -> 0:9
[    6.139271] IRQ10 -> 0:10
[    6.140178] IRQ11 -> 0:11
[    6.141141] IRQ12 -> 0:12
[    6.142036] IRQ13 -> 0:13
[    6.142934] IRQ14 -> 0:14
[    6.143845] IRQ15 -> 0:15
[    6.144757] .................................... done.
[    6.153212] Btrfs loaded, assert=on
[    6.154143] BTRFS: selftest: Running btrfs free space cache tests
[    6.155318] BTRFS: selftest: Running extent only tests
[    6.156385] BTRFS: selftest: Running bitmap only tests
[    6.157445] BTRFS: selftest: Running bitmap and extent tests
[    6.158995] BTRFS: selftest: Running space stealing from bitmap to extent
[    6.162820] BTRFS: selftest: Free space cache tests finished
[    6.164544] BTRFS: selftest: Running extent buffer operation tests
[    6.165660] BTRFS: selftest: Running btrfs_split_item tests
[    6.168200] BTRFS: selftest: Running extent I/O tests
[    6.169802] BTRFS: selftest: Running find delalloc tests
[    6.309769] swapper/0 invoked oom-killer: gfp_mask=0x24000c0(GFP_KERNEL), order=0, oom_score_adj=0
[    6.312666] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc2-00006-g1235bae #3
[    6.315381] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    6.317202]  0000000000000000 ffff880013fd3ae8 ffffffff8195b580 0000000000000001
[    6.319165]  ffff880013fd3c88 0000000000000000 0000000000000000 ffff880015105fd0
[    6.321130]  ffff880013fd3b60 ffffffff8130bcc8 ffffffff833f6dc0 ffff880013fd3b90
[    6.323089] Call Trace:
[    6.323839]  [<ffffffff8195b580>] dump_stack+0x84/0xc4
[    6.324865]  [<ffffffff8130bcc8>] dump_header+0x9e/0x39e
[    6.325979]  [<ffffffff81275d3f>] out_of_memory+0x5cf/0x830
[    6.327051]  [<ffffffff812831fd>] __alloc_pages_nodemask+0xedd/0x1000
[    6.328225]  [<ffffffff8128d12e>] ? __pagevec_lru_add_fn+0x17e/0x420
[    6.329385]  [<ffffffff812eb0de>] alloc_page_interleave+0x4e/0xd0
[    6.330510]  [<ffffffff812eeb33>] alloc_pages_current+0xe3/0x110
[    6.331635]  [<ffffffff8126de7d>] pagecache_get_page+0x11d/0x560
[    6.332753]  [<ffffffff817c046e>] test_find_delalloc+0xae/0xa00
[    6.333866]  [<ffffffff817c110f>] btrfs_test_extent_io+0x1f/0x140
[    6.334994]  [<ffffffff846d6b94>] init_btrfs_fs+0x150/0x239
[    6.336071]  [<ffffffff846d6a44>] ? trace_event_define_fields_btrfs_space_reservation+0x109/0x109
[    6.337907]  [<ffffffff846838ad>] do_one_initcall+0x24d/0x264
[    6.338996]  [<ffffffff84683b70>] kernel_init_freeable+0x2ac/0x366
[    6.340140]  [<ffffffff82b68523>] kernel_init+0x13/0x1a0
[    6.341198]  [<ffffffff82b7aec2>] ret_from_fork+0x22/0x40
[    6.342250]  [<ffffffff82b68510>] ? rest_init+0x90/0x90
[    6.343287] Mem-Info:
[    6.344022] active_anon:0 inactive_anon:0 isolated_anon:0
[    6.344022]  active_file:2175 inactive_file:34347 isolated_file:0
[    6.344022]  unevictable:22097 dirty:0 writeback:0 unstable:0
[    6.344022]  slab_reclaimable:6258 slab_unreclaimable:6372
[    6.344022]  mapped:0 shmem:0 pagetables:0 bounce:0
[    6.344022]  free:825 free_pcp:111 free_cma:0
[    6.349934] Node 0 DMA free:1232kB min:112kB low:140kB high:168kB active_anon:0kB inactive_anon:0kB active_file:0kB inactive_file:10872kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:15992kB managed:15908kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:40kB slab_unreclaimable:1392kB kernel_stack:48kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB writeback_tmp:0kB pages_scanned:70540 all_unreclaimable? yes
[    6.357537] lowmem_reserve[]: 0 280 280 280
[    6.358835] Node 0 DMA32 free:2068kB min:2084kB low:2604kB high:3124kB active_anon:0kB inactive_anon:0kB active_file:8700kB inactive_file:126516kB unevictable:88388kB isolated(anon):0kB isolated(file):0kB present:352128kB managed:287252kB mlocked:0kB dirty:0kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:24992kB slab_unreclaimable:24096kB kernel_stack:1264kB pagetables:0kB unstable:0kB bounce:0kB free_pcp:444kB local_pcp:360kB free_cma:0kB writeback_tmp:0kB pages_scanned:848952 all_unreclaimable? yes
[    6.383957] lowmem_reserve[]: 0 0 0 0
[    6.385864] Node 0 DMA: 0*4kB 0*8kB 1*16kB (U) 0*32kB 1*64kB (U) 1*128kB (U) 0*256kB 0*512kB 1*1024kB (U) 0*2048kB 0*4096kB = 1232kB
[    6.391101] Node 0 DMA32: 1*4kB (U) 0*8kB 3*16kB (UME) 1*32kB (E) 1*64kB (M) 1*128kB (E) 1*256kB (E) 3*512kB (UME) 0*1024kB 0*2048kB 0*4096kB = 2068kB
[    6.396910] 58630 total pagecache pages
[    6.398276] 92030 pages RAM
[    6.399431] 0 pages HighMem/MovableOnly
[    6.400315] 16240 pages reserved
[    6.401605] 0 pages hwpoisoned
[    6.402856] [ pid ]   uid  tgid total_vm      rss nr_ptes nr_pmds swapents oom_score_adj name
[    6.405696] Kernel panic - not syncing: Out of memory and no killable processes...
[    6.405696] 
[    6.409249] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc2-00006-g1235bae #3
[    6.411882] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    6.414756]  0000000000000000 ffff880013fd3ad8 ffffffff8195b580 0000000000000001
[    6.417810]  ffffffff82f95860 ffff880013fd3b70 0000000000000000 ffff880015105fd0
[    6.420881]  ffff880013fd3b60 ffffffff8126998f ffff880000000008 ffff880013fd3b70
[    6.423929] Call Trace:
[    6.425117]  [<ffffffff8195b580>] dump_stack+0x84/0xc4
[    6.426737]  [<ffffffff8126998f>] panic+0xef/0x39b
[    6.428297]  [<ffffffff81275d4b>] out_of_memory+0x5db/0x830
[    6.429758]  [<ffffffff812831fd>] __alloc_pages_nodemask+0xedd/0x1000
[    6.430930]  [<ffffffff8128d12e>] ? __pagevec_lru_add_fn+0x17e/0x420
[    6.432086]  [<ffffffff812eb0de>] alloc_page_interleave+0x4e/0xd0
[    6.433210]  [<ffffffff812eeb33>] alloc_pages_current+0xe3/0x110
[    6.434332]  [<ffffffff8126de7d>] pagecache_get_page+0x11d/0x560
[    6.435454]  [<ffffffff817c046e>] test_find_delalloc+0xae/0xa00
[    6.436562]  [<ffffffff817c110f>] btrfs_test_extent_io+0x1f/0x140
[    6.437688]  [<ffffffff846d6b94>] init_btrfs_fs+0x150/0x239
[    6.438756]  [<ffffffff846d6a44>] ? trace_event_define_fields_btrfs_space_reservation+0x109/0x109
[    6.440578]  [<ffffffff846838ad>] do_one_initcall+0x24d/0x264
[    6.441668]  [<ffffffff84683b70>] kernel_init_freeable+0x2ac/0x366
[    6.442795]  [<ffffffff82b68523>] kernel_init+0x13/0x1a0
[    6.443840]  [<ffffffff82b7aec2>] ret_from_fork+0x22/0x40
[    6.444885]  [<ffffffff82b68510>] ? rest_init+0x90/0x90
[    6.445952] Kernel Offset: disabled

Elapsed time: 20
qemu-system-x86_64 -enable-kvm -kernel /pkg/linux/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/vmlinuz-4.6.0-rc2-00006-g1235bae -append 'root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-17/rand_boot-1-quantal-core-x86_64.cgz-x86_64-randconfig-s3-06100451-1235baeac82d3113a7334f55a3fef160c5a4b983-20160610-77925-1xs3hv7-0.yaml~ ARCH=x86_64 kconfig=x86_64-randconfig-s3-06100451 branch=linux-devel/devel-spot-201606100535 commit=1235baeac82d3113a7334f55a3fef160c5a4b983 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/vmlinuz-4.6.0-rc2-00006-g1235bae max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-s3-06100451/gcc-6/1235baeac82d3113a7334f55a3fef160c5a4b983/0 LKP_SERVER=inn earlyprintk=ttyS0,115200 systemd.log_level=err debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 console=ttyS0,115200 console=tty0 vga=normal rw ip=::::vm-vp-quantal-x86_64-17::dhcp drbd.minor_count=8'  -initrd /fs/sdb1/initrd-vm-vp-quantal-x86_64-17 -m 360 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-x86_64-17 -serial file:/dev/shm/kboot/serial-vm-vp-quantal-x86_64-17 -daemonize -display none -monitor null 
