early console in setup code
Probing EDD (edd=off to disable)... ok
early console in extract_kernel
input_data: 0x0000000003e5d255
input_len: 0x000000000072be70
output: 0x0000000001000000
output_len: 0x0000000001e93830
kernel_total_size: 0x00000000035a8000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.8.0-rc1-00021-gad05399 (kbuild@lkp-ib03) (gcc version 6.1.1 20160705 (Debian 6.1.1-9) ) #1 SMP PREEMPT Fri Aug 12 07:23:11 CST 2016
[    0.000000] Command line: ip=::::vm-kbuild-yocto-x86_64-3::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-3/boot-1-yocto-minimal-x86_64.cgz-ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104-20160812-122343-ax2dev-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-08110915 branch=linux-devel/devel-hourly-2016081104 commit=ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-08110915/gcc-6/ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104/vmlinuz-4.8.0-rc1-00021-gad05399 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-n0-08110915/gcc-6/ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] KERNEL supported cpus:
[    0.000000]   Centaur CentaurHauls
[    0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[    0.000000] CPU: Your system may be unstable.
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable
[    0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6630-0x000f663f] mapped at [ffff8800000f6630]
[    0.000000]   mpc: f6640-f6718
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x04583000, 0x04583fff] PGTABLE
[    0.000000] BRK [0x04584000, 0x04584fff] PGTABLE
[    0.000000] BRK [0x04585000, 0x04585fff] PGTABLE
[    0.000000] BRK [0x04586000, 0x04586fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x1fa95000-0x1ffdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x000000001FFE16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x000000001FFE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x000000001FFE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x000000001FFE0000 000040
[    0.000000] ACPI: SSDT 0x000000001FFE0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x000000001FFE163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x000000001FFE16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000001ffdffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x1fa91000-0x1fa94fff]
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:1fa90001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 5123932004 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x000000001ffdffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x000000001ffdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff]
[    0.000000] On node 0 totalpages: 130942
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 1736 pages used for memmap
[    0.000000]   DMA32 zone: 126944 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 32 pages/cpu @ffff88001f400000 s99584 r0 d31488 u2097152
[    0.000000] pcpu-alloc: s99584 r0 d31488 u2097152 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1f40c7c0
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 129129
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: ip=::::vm-kbuild-yocto-x86_64-3::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-3/boot-1-yocto-minimal-x86_64.cgz-ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104-20160812-122343-ax2dev-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-08110915 branch=linux-devel/devel-hourly-2016081104 commit=ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-08110915/gcc-6/ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104/vmlinuz-4.8.0-rc1-00021-gad05399 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-n0-08110915/gcc-6/ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes)
[    0.000000] Memory: 455516K/523768K available (16546K kernel code, 1459K rwdata, 4880K rodata, 1128K init, 27580K bss, 68252K reserved, 0K cma-reserved)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=1
[    0.000000] NR_IRQS:4352 nr_irqs:256 16
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 8127 kB
[    0.000000]  per task-struct memory footprint: 1920 bytes
[    0.000000] ODEBUG: selftest passed
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: using HPET reference calibration
[    0.000000] tsc: Detected 2693.308 MHz processor
[    0.337108] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.341515] pid_max: default: 32768 minimum: 301
[    0.354646] ACPI: Core revision 20160422
[    0.361566] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    0.362713] 
[    0.363083] Security Framework initialized
[    0.363983] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.365890] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes)
[    0.368475] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.370616] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes)
[    0.374551] mce: CPU supports 10 MCE banks
[    0.376326] mce: unknown CPU type - not enabling MCE support
[    0.378372] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.379248] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.419066] Freeing SMP alternatives memory: 44K (ffffffff82a88000 - ffffffff82a93000)
[    0.423324] smpboot: Max logical packages: 1
[    0.423960] smpboot: APIC(0) Converting physical 0 to logical package 0
[    0.425143] enabled ExtINT on CPU#0
[    0.426689] ENABLING IO-APIC IRQs
[    0.427193] init IO_APIC IRQs
[    0.427665]  apic 0 pin 0 not connected
[    0.428242] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.429394] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.430599] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.431756] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.432906] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.434079] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.435230] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.436434] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.437608] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.438760] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.439932] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.441125] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.442318] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.443537] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.444730] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.445896]  apic 0 pin 16 not connected
[    0.446485]  apic 0 pin 17 not connected
[    0.447042]  apic 0 pin 18 not connected
[    0.447652]  apic 0 pin 19 not connected
[    0.448211]  apic 0 pin 20 not connected
[    0.448796]  apic 0 pin 21 not connected
[    0.449374]  apic 0 pin 22 not connected
[    0.449962]  apic 0 pin 23 not connected
[    0.450702] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.451604] TSC deadline timer enabled
[    0.452140] smpboot: CPU0: GenuineIntel Intel Xeon E312xx (Sandy Bridge) (family: 0x6, model: 0x2a, stepping: 0x1)
[    0.453675] Performance Events: no PMU driver, software events only.
[    0.463764] x86: Booted up 1 node, 1 CPUs
[    0.464349] smpboot: Total of 1 processors activated (5387.01 BogoMIPS)
[    0.465901] devtmpfs: initialized
[    0.466697] x86/mm: Memory block size: 128MB
[    0.519987] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.521897] xor: automatically using best checksumming function:
[    0.545496]    avx       : 12048.000 MB/sec
[    0.546119] prandom: seed boundary self test passed
[    0.548394] prandom: 100 self tests passed
[    0.549303] regulator-dummy: no parameters
[    0.550402] NET: Registered protocol family 16
[    0.565506] cpuidle: using governor menu
[    0.567326] ACPI: bus type PCI registered
[    0.568814] PCI: Using configuration type 1 for base access
[    0.659495] raid6: sse2x1   gen()  2398 MB/s
[    0.689512] raid6: sse2x1   xor()  1316 MB/s
[    0.721508] raid6: sse2x2   gen()  3937 MB/s
[    0.751513] raid6: sse2x2   xor()  2507 MB/s
[    0.781546] raid6: sse2x4   gen()  5347 MB/s
[    0.811569] raid6: sse2x4   xor()  3505 MB/s
[    0.812317] raid6: using algorithm sse2x4 gen() 5347 MB/s
[    0.813238] raid6: .... xor() 3505 MB/s, rmw enabled
[    0.827105] raid6: using ssse3x2 recovery algorithm
[    0.828313] ACPI: Added _OSI(Module Device)
[    0.828995] ACPI: Added _OSI(Processor Device)
[    0.829583] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.830181] ACPI: Added _OSI(Processor Aggregator Device)
[    0.834878] ACPI: Interpreter enabled
[    0.835466] ACPI: (supports S0 S3 S5)
[    0.836005] ACPI: Using IOAPIC for interrupt routing
[    0.836741] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.875916] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.876751] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.877465] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.878492] PCI host bridge to bus 0000:00
[    0.879026] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.879900] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.893793] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.894746] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window]
[    0.895706] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.896492] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.898583] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.900597] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.910332] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    0.913562] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.914628] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.915524] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.916433] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.917735] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.918951] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.919876] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.921280] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.925116] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.931301] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.940174] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.941611] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.944727] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.947680] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.958400] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.960437] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    0.963345] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    0.966060] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    0.993170] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    0.995083] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    1.013975] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    1.015239] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    1.016486] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    1.017722] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    1.018810] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    1.020828] ACPI: Enabled 16 GPEs in block 00 to 0F
[    1.022476] vgaarb: setting as boot device: PCI:0000:00:02.0
[    1.023311] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.024502] vgaarb: loaded
[    1.024908] vgaarb: bridge control possible 0000:00:02.0
[    1.026297] SCSI subsystem initialized
[    1.027946] libata version 3.00 loaded.
[    1.028639] ACPI: bus type USB registered
[    1.029311] usbcore: registered new interface driver usbfs
[    1.030150] usbcore: registered new interface driver hub
[    1.031008] usbcore: registered new device driver usb
[    1.031905] Linux video capture interface: v2.00
[    1.032623] pps_core: LinuxPPS API ver. 1 registered
[    1.033343] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.038439] PTP clock support registered
[    1.038992] EDAC MC: Ver: 3.0.0
[    1.053622] FPGA manager framework
[    1.054092] PCI: Using ACPI for IRQ routing
[    1.054648] PCI: pci_cache_line_size set to 64 bytes
[    1.055441] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    1.056289] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff]
[    1.057440] Bluetooth: Core ver 2.21
[    1.057927] NET: Registered protocol family 31
[    1.058517] Bluetooth: HCI device and connection manager initialized
[    1.059327] Bluetooth: HCI socket layer initialized
[    1.059976] Bluetooth: L2CAP socket layer initialized
[    1.060648] Bluetooth: SCO socket layer initialized
[    1.061292] NET: Registered protocol family 8
[    1.061854] NET: Registered protocol family 20
[    1.062607] nfc: nfc_init: NFC Core ver 0.1
[    1.063276] NET: Registered protocol family 39
[    1.064800] clocksource: Switched to clocksource kvm-clock
[    1.065601] VFS: Disk quotas dquot_6.6.0
[    1.066152] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    1.080183] pnp: PnP ACPI init
[    1.080788] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.081776] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    1.082745] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    1.083681] pnp 00:03: [dma 2]
[    1.084163] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    1.085306] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    1.086324] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    1.087919] pnp: PnP ACPI: found 6 devices
[    1.106401] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    1.107864] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    1.108774] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    1.109690] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    1.110701] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window]
[    1.111764] NET: Registered protocol family 1
[    1.112445] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    1.113335] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    1.114277] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    1.115266] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    1.116602] PCI: CLS 0 bytes, default 64
[    1.117297] Unpacking initramfs...
[    1.912378] Freeing initrd memory: 5420K (ffff88001fa95000 - ffff88001ffe0000)
[    1.916218] Machine check injector initialized
[    1.917131] Scanning for low memory corruption every 60 seconds
[    1.921662] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    1.924319] spin_lock-torture: Creating torture_shuffle task
[    1.925312] spin_lock-torture: Creating torture_stutter task
[    1.926208] spin_lock-torture: torture_shuffle task started
[    1.927075] spin_lock-torture: Creating lock_torture_writer task
[    1.928001] spin_lock-torture: torture_stutter task started
[    1.930824] spin_lock-torture: Creating lock_torture_writer task
[    1.930850] spin_lock-torture: lock_torture_writer task started
[    1.932644] spin_lock-torture: Creating lock_torture_stats task
[    1.933548] spin_lock-torture: lock_torture_writer task started
[    1.934445] torture_init_begin: Refusing rcu init: spin_lock running.
[    1.935393] torture_init_begin: One torture test at a time!
[    1.936717] futex hash table entries: 256 (order: 3, 32768 bytes)
[    1.937666] spin_lock-torture: lock_torture_stats task started
[    1.940056] workingset: timestamp_bits=56 max_order=17 bucket_order=0
[    1.941758] fuse init (API version 7.25)
[    1.942588] JFS: nTxBlock = 3601, nTxLock = 28811
[    1.944891] SGI XFS with security attributes, realtime, no debug enabled
[    1.951516] NILFS version 2 loaded
[    1.952172] ocfs2: Registered cluster interface o2cb
[    1.954101] OCFS2 User DLM kernel interface loaded
[    1.960438] gfs2: GFS2 installed
[    1.965035] NET: Registered protocol family 38
[    1.965751] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[    1.966918] io scheduler noop registered
[    1.967507] io scheduler deadline registered (default)
[    1.972446] test_hexdump: all 1184 tests passed
[    1.973241] test_firmware: interface ready
[    2.046921] test_hash: __hash_32() has no arch implementation to test.
[    2.047925] test_hash: hash_32() has no arch implementation to test.
[    2.048857] test_hash: hash_64() has no arch implementation to test.
[    2.061218] test_hash: 33152 tests passed.
[    2.061988] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    2.062925] Test 00:
[    2.065450]   Adding 50000 keys
[    2.167097] Info: encountered resize
[    2.173699]   Traversal complete: counted=53763, nelems=50000, entries=50000, table-jumps=1
[    2.175064] Test failed: Total count mismatch ^^^  Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.219325]   Deleting 50000 keys
[    2.250846]   Duration of test: 184898304 ns
[    2.251674] Test 01:
[    2.254495]   Adding 50000 keys
[    2.309235]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.361703]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.363127]   Deleting 50000 keys
[    2.395954]   Duration of test: 140872656 ns
[    2.396861] Test 02:
[    2.399610]   Adding 50000 keys
[    2.468031]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.511305]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.512590]   Deleting 50000 keys
[    2.542198]   Duration of test: 142036761 ns
[    2.543010] Test 03:
[    2.545461]   Adding 50000 keys
[    2.609270]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.655690]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    2.656959]   Deleting 50000 keys
[    2.689548]   Duration of test: 143585256 ns
[    2.690337] Average test time: 152848244
[    2.690989] Testing concurrent rhashtable access from 10 threads
[    3.061314]   thread[9]: rhashtable_insert_fast failed
[    3.062127]   thread[6]: rhashtable_insert_fast failed
[    3.062134]   thread[4]: rhashtable_insert_fast failed
[    3.062139]   thread[8]: rhashtable_insert_fast failed
[    3.062144]   thread[7]: rhashtable_insert_fast failed
[    3.062148]   thread[1]: rhashtable_insert_fast failed
[    3.063351]   thread[5]: rhashtable_insert_fast failed
[    3.063357]   thread[0]: rhashtable_insert_fast failed
[    3.063371] Test failed: thread 0 returned: -12
[    3.063384] Test failed: thread 1 returned: -12
[    3.063424]   thread[3]: rhashtable_insert_fast failed
[    3.065180] tsc: Refined TSC clocksource calibration: 2693.513 MHz
[    3.065185] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d34e52b35, max_idle_ns: 440795258001 ns
[    3.071853]   thread[2]: rhashtable_insert_fast failed
[    3.071867] Test failed: thread 2 returned: -12
[    3.071901] Test failed: thread 3 returned: -12
[    3.071924] Test failed: thread 4 returned: -12
[    3.071944] Test failed: thread 5 returned: -12
[    3.071963] Test failed: thread 6 returned: -12
[    3.071981] Test failed: thread 7 returned: -12
[    3.072000] Test failed: thread 8 returned: -12
[    3.096839] Test failed: thread 9 returned: -12
[    3.097609] Started 10 threads, 10 failed
[    3.110537] test_printf: all 260 tests passed
[    3.326628] test_bitmap: all 460506 tests passed
[    3.327968] test_uuid: all 18 tests passed
[    3.329201] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[    3.329965] crc32: self tests passed, processed 225944 bytes in 261765 nsec
[    3.331246] crc32c: CRC_LE_BITS = 64
[    3.331779] crc32c: self tests passed, processed 225944 bytes in 127025 nsec
[    3.393993] crc32_combine: 8373 self tests passed
[    3.443022] crc32c_combine: 8373 self tests passed
[    3.444026] glob: 64 self-tests passed, 0 failed
[    3.445104] no IO addresses supplied
[    3.445835] hgafb: HGA card not detected.
[    3.446435] hgafb: probe of hgafb.0 failed with error -22
[    3.447457] usbcore: registered new interface driver udlfb
[    3.448329] usbcore: registered new interface driver smscufx
[    3.452289] uvesafb: SeaBIOS Developers, SeaBIOS VBE Adapter, Rev. 1, OEM: SeaBIOS VBE(C) 2011, VBE v3.0
[    3.498667] uvesafb: no monitor limits have been set, default refresh rate will be used
[    3.500074] uvesafb: scrolling: redraw
[    3.500939] uvesafb: framebuffer at 0xfd000000, mapped to 0xffffc90002000000, using 16384k, total 16384k
[    3.502324] fb0: VESA VGA frame buffer device
[    3.503086] ipmi message handler version 39.2
[    3.503772] IPMI System Interface driver.
[    3.504501] ipmi_si: Unable to find any System Interface(s)
[    3.505327] IPMI SSIF Interface driver
[    3.505944] IPMI Watchdog: driver initialized
[    3.506611] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot.
[    3.508024] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    3.509200] ACPI: Power Button [PWRF]
[    3.509928] Warning: Processor Platform Limit event detected, but not handled.
[    3.511062] Consider compiling CPUfreq support into your kernel.
[    3.618068] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.678051] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    3.682230] lp: driver loaded but no devices found
[    3.683007] ppdev: user-space parallel port driver
[    3.683724] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    3.684495] smapi::smapi_init, ERROR invalid usSmapiID
[    3.685247] mwave: tp3780i::tp3780I_InitializeBoardData: Error: SMAPI is not available on this machine
[    3.693447] mwave: mwavedd::mwave_init: Error: Failed to initialize board data
[    3.694618] mwave: mwavedd::mwave_init: Error: Failed to initialize
[    3.695600] SyncLink PC Card driver $Revision: 4.34 $, tty major#244
[    3.706519] [drm] Initialized drm 1.1.0 20060810
[    3.707915] usbcore: registered new interface driver udl
[    3.708962] parport_pc 00:04: reported by Plug and Play ACPI
[    3.710219] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
[    3.810234] lp0: using parport0 (interrupt-driven).
[    3.811010] lp0: console ready
[    3.812604] dummy-irq: no IRQ given.  Use irq=N
[    3.813405] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[    3.925348] panel: driver version 0.9.5 registered on parport0 (io=0x378).
[    3.926681] usbcore: registered new interface driver rtsx_usb
[    3.928142] usbcore: registered new interface driver pn533_usb
[    3.929059] usbcore: registered new interface driver nfcmrvl
[    3.930011] NCI uart driver 'nfcmrvl_uart [0]' registered
[    3.930889] Uniform Multi-Platform E-IDE driver
[    3.932292] ide-cd driver 5.00
[    3.933053] rdac: device handler registered
[    3.947367] hp_sw: device handler registered
[    3.948042] emc: device handler registered
[    3.951204] ppa: Version 2.07 (for Linux 2.4.x)
[    6.992833] ppa0: failed to claim parport because a pardevice is owning the port for too long time!
[    6.994241] imm: Version 2.05 (for Linux 2.4.0)
[   10.000828] imm0: failed to claim parport because a pardevice is owning the port for too long time!
[   10.002296] st: Version 20160209, fixed bufsize 32768, s/g segs 256
[   10.003301] osst :I: Tape driver with OnStream support version 0.99.4
[   10.003301] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $
[   10.009586] scsi host0: scsi_debug: version 1.86 [20160430]
[   10.009586]   dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[   10.015590] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0186 PQ: 0 ANSI: 7
[   10.020455] Error: Driver 'pata_platform' is already registered, aborting...
[   10.021651] SSFDC read-only Flash Translation layer
[   10.022384] mtdoops: mtd device (mtddev=name/number) must be supplied
[   10.078324] No valid DiskOnChip devices found
[   10.079064] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   10.080440] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   10.085264] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   10.086632] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   10.087995] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   10.089359] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0
[   10.090718] nand: device found, Manufacturer ID: 0x98, Chip ID: 0x39
[   10.098463] nand: Toshiba NAND 128MiB 1,8V 8-bit
[   10.099186] nand: 128 MiB, SLC, erase size: 16 KiB, page size: 512, OOB size: 16
[   10.100305] flash size: 128 MiB
[   10.100779] page size: 512 bytes
[   10.101266] OOB area size: 16 bytes
[   10.101783] sector size: 16 KiB
[   10.102265] pages number: 262144
[   10.102746] pages per sector: 32
[   10.103236] bus width: 8
[   10.103621] bits in sector size: 14
[   10.104142] bits in page size: 9
[   10.104618] bits in OOB size: 4
[   10.111896] flash size with OOB: 135168 KiB
[   10.112582] page address bytes: 4
[   10.113081] sector address bytes: 3
[   10.113594] options: 0x42
[   10.117416] Scanning device for bad blocks
[   10.208530] Creating 1 MTD partitions on "NAND 128MiB 1,8V 8-bit":
[   10.209490] 0x000000000000-0x000008000000 : "NAND simulator partition 0"
[   10.226811] MACsec IEEE 802.1AE
[   10.228785] libphy: Fixed MDIO Bus: probed
[   10.233570] arcnet: arcnet loaded
[   10.234086] arcnet:rfc1051: RFC1051 "simple standard" (`s') encapsulation support loaded
[   10.235280] arcnet:com90io: COM90xx IO-mapped mode support (by David Woodhouse et el.)
[   10.236434] arcnet:com90io: E-mail me if you actually test this driver, please!
[   10.237501] (unnamed net_device) (uninitialized): No autoprobe for IO mapped cards; you must specify the base address!
[   10.252503] ipddp.c:v0.01 8/28/97 Bradford W. Johnson <johns393@maroon.tc.umn.edu>
[   10.253893] ipddp0: Appletalk-IP Decap. mode by Jay Schulist <jschlst@samba.org>
[   10.254985] vcan: Virtual CAN interface driver
[   10.255604] CAN device driver interface
[   10.256181] usbcore: registered new interface driver ems_usb
[   10.257005] usbcore: registered new interface driver esd_usb2
[   10.257834] usbcore: registered new interface driver kvaser_usb
[   10.258693] usbcore: registered new interface driver peak_usb
[   10.259596] sja1000 CAN netdevice driver
[   10.260155] sja1000_isa: insufficient parameters supplied
[   10.261034] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[   10.261999] e1000: Copyright (c) 1999-2006 Intel Corporation.
[   10.476184] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[   11.075283] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[   11.076333] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[   11.077402] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   11.078275] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   11.079211] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
[   11.080237] igb: Copyright (c) 2007-2014 Intel Corporation.
[   11.081107] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[   11.082230] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[   11.087376] NET3 PLIP version 2.4-parport gniibe@mri.co.jp
[   11.088216] plip0: Parallel port at 0x378, using IRQ 7.
[   11.089006] PPP generic driver version 2.4.2
[   11.089828] PPP Deflate Compression module registered
[   11.094676] NET: Registered protocol family 24
[   11.095372] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256).
[   11.096455] SLIP linefill/keepalive option.
[   11.097080] hdlc: HDLC support module revision 1.22
[   11.097828] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org.
[   11.106364] LAPB Ethernet driver version 0.02
[   11.107027] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
[   11.108171] usbcore: registered new interface driver pegasus
[   11.109040] usbcore: registered new interface driver lan78xx
[   11.122065] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   11.123049] ehci-pci: EHCI PCI platform driver
[   11.123741] ehci-platform: EHCI generic platform driver
[   11.124649] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver
[   11.125633] usbcore: registered new interface driver cdc_acm
[   11.126486] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[   11.127680] usbcore: registered new interface driver usblp
[   11.128483] usbcore: registered new interface driver cdc_wdm
[   11.129353] usbcore: registered new interface driver usbtmc
[   11.130213] usbcore: registered new interface driver uas
[   11.131030] usbcore: registered new interface driver usb-storage
[   11.131938] usbcore: registered new interface driver ums-alauda
[   11.132841] usbcore: registered new interface driver ums-cypress
[   11.133734] usbcore: registered new interface driver ums-datafab
[   11.146345] usbcore: registered new interface driver ums-isd200
[   11.147243] usbcore: registered new interface driver ums-jumpshot
[   11.148164] usbcore: registered new interface driver ums-karma
[   11.149052] usbcore: registered new interface driver ums-onetouch
[   11.149982] usbcore: registered new interface driver ums-realtek
[   11.150901] usbcore: registered new interface driver ums-sddr09
[   11.151815] usbcore: registered new interface driver mdc800
[   11.152670] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   11.153847] usbcore: registered new interface driver microtekX6
[   11.154780] usbcore: registered new interface driver usbserial
[   11.155676] usbcore: registered new interface driver belkin_sa
[   11.156596] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter
[   11.157976] usbcore: registered new interface driver ch341
[   11.158821] usbserial: USB Serial support registered for ch341-uart
[   11.159759] usbcore: registered new interface driver cp210x
[   11.160625] usbserial: USB Serial support registered for cp210x
[   11.161527] usbcore: registered new interface driver cyberjack
[   11.162424] usbserial: USB Serial support registered for Reiner SCT Cyberjack USB card reader
[   11.163699] usbcore: registered new interface driver cypress_m8
[   11.164601] usbserial: USB Serial support registered for DeLorme Earthmate USB
[   11.178898] usbserial: USB Serial support registered for HID->COM RS232 Adapter
[   11.180049] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter
[   11.181161] usbcore: registered new interface driver usb_debug
[   11.182061] usbserial: USB Serial support registered for debug
[   11.182963] usbcore: registered new interface driver digi_acceleport
[   11.183930] usbserial: USB Serial support registered for Digi 2 port USB adapter
[   11.185035] usbserial: USB Serial support registered for Digi 4 port USB adapter
[   11.186145] usbcore: registered new interface driver io_edgeport
[   11.187092] usbserial: USB Serial support registered for Edgeport 2 port adapter
[   11.188206] usbserial: USB Serial support registered for Edgeport 4 port adapter
[   11.189319] usbserial: USB Serial support registered for Edgeport 8 port adapter
[   11.190552] usbserial: USB Serial support registered for EPiC device
[   11.233796] usbcore: registered new interface driver io_ti
[   11.234634] usbserial: USB Serial support registered for Edgeport TI 1 port adapter
[   11.235757] usbserial: USB Serial support registered for Edgeport TI 2 port adapter
[   11.236888] usbcore: registered new interface driver empeg
[   11.237694] usbserial: USB Serial support registered for empeg
[   11.238583] usbcore: registered new interface driver ipaq
[   11.239381] usbserial: USB Serial support registered for PocketPC PDA
[   11.240327] usbcore: registered new interface driver ipw
[   11.241142] usbserial: USB Serial support registered for IPWireless converter
[   11.242186] usbcore: registered new interface driver iuu_phoenix
[   11.243077] usbserial: USB Serial support registered for iuu_phoenix
[   11.244012] usbcore: registered new interface driver keyspan
[   11.244867] usbserial: USB Serial support registered for Keyspan - (without firmware)
[   11.246031] usbserial: USB Serial support registered for Keyspan 1 port adapter
[   11.247100] usbserial: USB Serial support registered for Keyspan 2 port adapter
[   11.248175] usbserial: USB Serial support registered for Keyspan 4 port adapter
[   11.249253] usbcore: registered new interface driver keyspan_pda
[   11.263330] usbserial: USB Serial support registered for Keyspan PDA
[   11.264281] usbserial: USB Serial support registered for Keyspan PDA - (prerenumeration)
[   11.265458] usbserial: USB Serial support registered for Xircom / Entrega PGS - (prerenumeration)
[   11.266762] usbcore: registered new interface driver kl5kusb105
[   11.267680] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect
[   11.268814] usbcore: registered new interface driver kobil_sct
[   11.269669] usbserial: USB Serial support registered for KOBIL USB smart card terminal
[   11.270846] usbcore: registered new interface driver metro_usb
[   11.271697] usbserial: USB Serial support registered for Metrologic USB to Serial
[   11.272785] usbcore: registered new interface driver navman
[   11.273619] usbserial: USB Serial support registered for navman
[   11.274492] usbcore: registered new interface driver omninet
[   11.275339] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb
[   11.289647] usbcore: registered new interface driver opticon
[   11.290503] usbserial: USB Serial support registered for opticon
[   11.291387] usbcore: registered new interface driver oti6858
[   11.292228] usbserial: USB Serial support registered for oti6858
[   11.293125] usbcore: registered new interface driver pl2303
[   11.293962] usbserial: USB Serial support registered for pl2303
[   11.294838] usbcore: registered new interface driver qcaux
[   11.295640] usbserial: USB Serial support registered for qcaux
[   11.296511] usbcore: registered new interface driver qcserial
[   11.297371] usbserial: USB Serial support registered for Qualcomm USB modem
[   11.298388] usbcore: registered new interface driver safe_serial
[   11.299276] usbserial: USB Serial support registered for safe_serial
[   11.300209] usbcore: registered new interface driver sierra
[   11.301051] usbserial: USB Serial support registered for Sierra USB modem
[   11.315212] usbcore: registered new interface driver symbolserial
[   11.316125] usbserial: USB Serial support registered for symbol
[   11.317005] usbcore: registered new interface driver visor
[   11.317830] usbserial: USB Serial support registered for Handspring Visor / Palm OS
[   11.319085] usbserial: USB Serial support registered for Sony Clie 5.0
[   11.320163] usbserial: USB Serial support registered for Sony Clie 3.5
[   11.321238] usbcore: registered new interface driver wishbone_serial
[   11.322299] usbserial: USB Serial support registered for wishbone_serial
[   11.347833] usbcore: registered new interface driver whiteheat
[   11.352422] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration)
[   11.353838] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT
[   11.355018] usbcore: registered new interface driver xsens_mt
[   11.355897] usbserial: USB Serial support registered for xsens_mt
[   11.356808] usbcore: registered new interface driver adutux
[   11.369946] usbcore: registered new interface driver appledisplay
[   11.370960] usbcore: registered new interface driver cypress_cy7c63
[   11.371890] usbcore: registered new interface driver emi62 - firmware loader
[   11.372938] usbcore: registered new interface driver idmouse
[   11.373775] usbcore: registered new interface driver iowarrior
[   11.374657] usbcore: registered new interface driver isight_firmware
[   11.375607] usbcore: registered new interface driver usblcd
[   11.376446] usbcore: registered new interface driver ldusb
[   11.377273] usbcore: registered new interface driver legousbtower
[   11.378189] usbcore: registered new interface driver rio500
[   11.379021] usbcore: registered new interface driver usbtest
[   11.379866] usbcore: registered new interface driver usb_ehset_test
[   11.380776] usbcore: registered new interface driver trancevibrator
[   11.381706] usbcore: registered new interface driver uss720
[   11.382563] uss720: v0.6:USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip
[   11.383905] uss720: NOTE: this is a special purpose driver to allow nonstandard
[   11.384973] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables
[   11.386023] uss720: If you just want to connect to a printer, use usblp instead
[   11.387235] usbcore: registered new interface driver usbsevseg
[   11.388110] usbcore: registered new interface driver yurex
[   11.388943] usbcore: registered new interface driver lvs
[   11.389767] usbcore: registered new interface driver cxacru
[   11.390646] usbcore: registered new interface driver ueagle-atm
[   11.391661] xusbatm: malformed module parameters
[   11.392970] udc-core: couldn't find an available UDC - added [g_multi] to list of pending drivers
[   11.394284] usbip_core: usbip_core_init:776: USB/IP Core v1.0.0
[   11.407568] usbcore: registered new device driver usbip-host
[   11.408410] usbip_host: usbip_host_init:302: USB/IP Host Driver v1.0.0
[   11.410087] using random self ethernet address
[   11.410736] using random host ethernet address
[   11.411581] using random self ethernet address
[   11.413665] using random host ethernet address
[   11.414665] usb0: HOST MAC 32:a7:c3:5d:a3:35
[   11.415490] usb0: MAC a2:41:3f:ae:f4:16
[   11.416221] Mass Storage Function, version: 2009/09/11
[   11.416987] LUN: removable file: (no medium)
[   11.418064] no file given for LUN0
[   11.430593] g_multi usbip-vudc.0: failed to start g_multi: -22
[   11.431735] usbip-vudc: probe of usbip-vudc.0 failed with error -22
[   11.432866] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   11.435189] serio: i8042 KBD port at 0x60,0x64 irq 1
[   11.436114] serio: i8042 AUX port at 0x60,0x64 irq 12
[   11.437028] parport0: cannot grant exclusive access for device parkbd
[   11.438488] mousedev: PS/2 mouse device common for all mice
[   11.439408] evbug: Connected device: input0 (Power Button at LNXPWRBN/button/input0)
[   11.440603] ------------[ cut here ]------------
[   11.441287] WARNING: CPU: 0 PID: 25 at lib/list_debug.c:59 __list_del_entry+0x78/0xc0
[   11.443763] list_del corruption. prev->next should be ffff88001aadaa00, but was ffff88001aada200
[   11.447299] CPU: 0 PID: 25 Comm: kworker/0:1 Not tainted 4.8.0-rc1-00021-gad05399 #1
[   11.448390] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   11.449661] Workqueue: events_long serio_handle_event
[   11.450387]  0000000000000000 ffff88001e6a3b88 ffffffff8168cf8a ffff88001e6a3bd8
[   11.451639]  0000000000000000 ffffffff825bbfa0 ffffffff816b0d18 ffff88001e6a3bc8
[   11.452781]  ffffffff8108cb1e 0000003b81243b63 ffffffff825bbfa0 000000000000003b
[   11.453902] Call Trace:
[   11.454263]  [<ffffffff8168cf8a>] dump_stack+0x83/0xb9
[   11.455125]  [<ffffffff816b0d18>] ? __list_del_entry+0x78/0xc0
[   11.465160]  [<ffffffff8108cb1e>] __warn+0xfe/0x130
[   11.465869]  [<ffffffff8108cbb3>] warn_slowpath_fmt+0x63/0x70
[   11.466685]  [<ffffffff81860d8f>] ? devices_kset_move_last+0x2f/0x70
[   11.467612]  [<ffffffff816b0d18>] __list_del_entry+0x78/0xc0
[   11.468409]  [<ffffffff81860d9e>] devices_kset_move_last+0x3e/0x70
[   11.469285]  [<ffffffff8186672c>] driver_probe_device+0x11c/0x340
[   11.470146]  [<ffffffff81866950>] ? driver_probe_device+0x340/0x340
[   11.471220]  [<ffffffff818669fd>] __driver_attach+0xad/0xf0
[   11.472006]  [<ffffffff8186412c>] bus_for_each_dev+0x8c/0xe0
[   11.472807]  [<ffffffff81866ba2>] driver_attach+0x22/0x30
[   11.473600]  [<ffffffff81bde288>] serio_handle_event+0x198/0x270
[   11.474447]  [<ffffffff810a84aa>] process_one_work+0x29a/0x550
[   11.475264]  [<ffffffff810a8436>] ? process_one_work+0x226/0x550
[   11.476108]  [<ffffffff810a8aeb>] worker_thread+0x38b/0x5b0
[   11.477026]  [<ffffffff810a8760>] ? process_one_work+0x550/0x550
[   11.492134]  [<ffffffff810b0597>] kthread+0x117/0x130
[   11.492861]  [<ffffffff820252df>] ret_from_fork+0x1f/0x40
[   11.493622]  [<ffffffff810b0480>] ? __kthread_unpark+0x80/0x80
[   11.494543] ---[ end trace b696b5aff8dfca8b ]---
[   11.495291] usbcore: registered new interface driver usb_acecad
[   11.507396] usbcore: registered new interface driver aiptek
[   11.508144] usbcore: registered new interface driver gtco
[   11.508880] usbcore: registered new interface driver hanwang
[   11.509613] usbcore: registered new interface driver kbtab
[   11.510721] mk712: device not present
[   11.511236] usbcore: registered new interface driver usbtouchscreen
[   11.512597] rtc_cmos 00:00: RTC can wake from S4
[   11.513852] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[   11.527786] rtc_cmos 00:00: alarms up to one day, 114 bytes nvram, hpet irqs
[   11.529669] rtc-test rtc-test.0: rtc core: registered test as rtc1
[   11.530797] rtc-test rtc-test.1: rtc core: registered test as rtc2
[   11.532044] usbcore: registered new interface driver i2c-diolan-u2c
[   11.532969] i2c-parport: adapter type unspecified
[   11.533668] i2c-parport-light: adapter type unspecified
[   11.534481] usbcore: registered new interface driver RobotFuzz Open Source InterFace, OSIF
[   11.535935] usbcore: registered new interface driver radioshark
[   11.536863] usbcore: registered new interface driver radioshark2
[   11.537766] usbcore: registered new interface driver dsbr100
[   11.538641] usbcore: registered new interface driver radio-si470x
[   11.539653] usbcore: registered new interface driver radio-keene
[   11.540589] usbcore: registered new interface driver radio-ma901
[   11.541766] usbcore: registered new interface driver radio-raremono
[   11.542705] pps_ldisc: PPS line discipline registered
[   11.543577] pps_parport: parallel port PPS client
[   11.544281] parport0: cannot grant exclusive access for device pps_parport
[   11.545286] pps_parport: couldn't register with parport0
[   11.546123] Driver for 1-wire Dallas network protocol.
[   11.547018] usbcore: registered new interface driver DS9490R
[   11.548324] __power_supply_register: Expected proper parent device for 'test_ac'
[   11.549524] power_supply test_ac: uevent
[   11.550117] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   11.550973] __power_supply_register: Expected proper parent device for 'test_battery'
[   11.552276] power_supply test_battery: uevent
[   11.552947] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   11.554002] thermal thermal_zone0: power_allocator: sustainable_power will be estimated
[   11.555214] __power_supply_register: Expected proper parent device for 'test_usb'
[   11.556423] power_supply test_usb: uevent
[   11.557073] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   11.560687] Bluetooth: Virtual HCI driver ver 1.5
[   11.561541] Bluetooth: HCI UART driver ver 2.3
[   11.562241] power_supply test_ac: power_supply_changed
[   11.562285] power_supply test_ac: power_supply_changed_work
[   11.562293] power_supply test_ac: power_supply_update_gen_leds 1
[   11.562310] power_supply test_ac: uevent
[   11.562315] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   11.562323] power_supply test_ac: prop ONLINE=1
[   11.566261] power_supply test_battery: power_supply_changed
[   11.566274] power_supply test_battery: power_supply_changed_work
[   11.566281] power_supply test_battery: power_supply_update_bat_leds 2
[   11.566291] power_supply test_battery: uevent
[   11.566296] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   11.566305] power_supply test_battery: prop STATUS=Discharging
[   11.566312] power_supply test_battery: prop CHARGE_TYPE=Fast
[   11.566318] power_supply test_battery: prop HEALTH=Good
[   11.566324] power_supply test_battery: prop PRESENT=1
[   11.566331] power_supply test_battery: prop TECHNOLOGY=Li-ion
[   11.566338] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[   11.566345] power_supply test_battery: prop CHARGE_FULL=100
[   11.566351] power_supply test_battery: prop CHARGE_NOW=50
[   11.566358] power_supply test_battery: prop CAPACITY=50
[   11.566364] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   11.566371] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   11.566378] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   11.566385] power_supply test_battery: prop MODEL_NAME=Test battery
[   11.566392] power_supply test_battery: prop MANUFACTURER=Linux
[   11.566399] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-rc1-00021-gad05399
[   11.566405] power_supply test_battery: prop TEMP=26
[   11.566412] power_supply test_battery: prop VOLTAGE_NOW=3300
[   11.568845] power_supply test_usb: power_supply_changed
[   11.568856] power_supply test_usb: power_supply_changed_work
[   11.568863] power_supply test_usb: power_supply_update_gen_leds 1
[   11.568872] power_supply test_usb: uevent
[   11.568876] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   11.568883] power_supply test_usb: prop ONLINE=1
[   11.590681] Bluetooth: HCI UART protocol H4 registered
[   11.591450] Bluetooth: HCI UART protocol BCSP registered
[   11.592239] Bluetooth: HCI UART protocol LL registered
[   11.593004] Bluetooth: HCI UART protocol Three-wire (H5) registered
[   11.593990] Bluetooth: HCI UART protocol Intel registered
[   11.594837] Bluetooth: HCI UART protocol BCM registered
[   11.595606] Bluetooth: HCI UART protocol AG6XX registered
[   11.596450] usbcore: registered new interface driver bcm203x
[   11.597318] usbcore: registered new interface driver bpa10x
[   11.598255] usbcore: registered new interface driver btusb
[   11.604272] ISDN subsystem Rev: 1.1.2.3/1.1.2.2/none/1.1.2.2/1.1.2.2
[   11.605536] CAPI 2.0 started up with major 68 (middleware)
[   11.606356] Modular ISDN core version 1.1.29
[   11.607121] NET: Registered protocol family 34
[   11.607785] mISDN: Layer-1-over-IP driver Rev. 2.00
[   11.608936] 0 virtual devices registered
[   11.609519] HiSax: Linux Driver for passive ISDN cards
[   11.610273] HiSax: Version 3.5 (kernel)
[   11.610865] HiSax: Layer1 Revision 2.46.2.5
[   11.611483] HiSax: Layer2 Revision 2.30.2.4
[   11.612108] HiSax: TeiMgr Revision 2.20.2.3
[   11.612725] HiSax: Layer3 Revision 2.22.2.3
[   11.613356] HiSax: LinkLayer Revision 2.59.2.4
[   11.614042] HiSax: Total 1 card defined
[   11.614653] HiSax: Card 1 Protocol NONE Id=HiSax (0)
[   11.615397] HiSax: HFC-SX driver Rev. 1.12.2.5
[   11.616097] HFC-SX: invalid chip id 0xf
[   11.616687] HiSax: Card HFC 2BDS0 SX not installed !
[   11.617475] hisax_st5481: ST5481 USB ISDN driver $Revision: 2.4.2.3 $
[   11.618476] usbcore: registered new interface driver st5481_usb
[   11.619358] HFC-S USB: driver module revision 2.3.2.24 date 2007/10/14 loaded, (debug=0)
[   11.620615] usbcore: registered new interface driver hfc_usb
[   11.621459] HFC-4S/8S: Layer 1 driver module for HFC-4S/8S isdn chips, Revision: 1.10
[   11.622596] HFC-4S/8S: (C) 2003 Cornelius Consult, www.cornelius-consult.de
[   11.623661] HFC-4S/8S: found 0 cards
[   11.624212] gigaset: Driver for Gigaset 307x (debug build)
[   11.625026] gigaset: Kernel CAPI interface
[   11.625706] usbcore: registered new interface driver usb_gigaset
[   11.626610] usb_gigaset: USB Driver for Gigaset 307x using M105
[   11.627537] usbcore: registered new interface driver bas_gigaset
[   11.628421] bas_gigaset: USB Driver for Gigaset 307x
[   11.631224] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[   11.632436] hidraw: raw HID events driver (C) Jiri Kosina
[   11.634759] usbcore: registered new interface driver usbhid
[   11.635603] usbhid: USB HID core driver
[   11.636766] CHRDEV "fwloop" major number 233 goes below the dynamic allocation range
[   11.640396]  fake-fmc-carrier: mezzanine 0
[   11.641101]       Manufacturer: fake-vendor
[   11.641725]       Product name: fake-design-for-testing
[   11.658780] fmc fake-design-for-testing-f001: Driver has no ID: matches all
[   11.659945] fmc_write_eeprom fake-design-for-testing-f001: fmc_write_eeprom: no busid passed, refusing all cards
[   11.663377] NET: Registered protocol family 17
[   11.664117] NET: Registered protocol family 15
[   11.664830] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[   11.666689] NET: Registered protocol family 4
[   11.667390] NET: Registered protocol family 5
[   11.668079] NET: Registered protocol family 9
[   11.668727] X25: Linux Version 0.2
[   11.669259] can: controller area network core (rev 20120528 abi 9)
[   11.670225] NET: Registered protocol family 29
[   11.670906] can: raw protocol (rev 20120528)
[   11.671557] can: broadcast manager protocol (rev 20160617 t)
[   11.672389] can: netlink gateway (rev 20130117) max_hops=1
[   11.673228] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[   11.674118] Bluetooth: HIDP socket layer initialized
[   11.674877] 8021q: 802.1Q VLAN Support v1.8
[   11.688821] 9pnet: Installing 9P2000 support
[   11.689517] NET: Registered protocol family 37
[   11.690255] Key type dns_resolver registered
[   11.692201] batman_adv: B.A.T.M.A.N. advanced 2016.3 (compatibility version 15) loaded
[   11.693421] mpls_gso: MPLS GSO support
[   11.694044] mce: Unable to init device /dev/mcelog (rc: -5)
[   11.696127] ... APIC ID:      00000000 (0)
[   11.696750] ... APIC VERSION: 01050014
[   11.697315] 0000000000000000000000000000000000000000000000000000000000000000
[   11.714814] 0000000000000000000000000000000000000000000000000000000000000000
[   11.716023] 0000000000000000000000000000000000000000000000000000000000008000
[   11.717253] 
[   11.717591] number of MP IRQ sources: 15.
[   11.718194] number of IO-APIC #0 registers: 24.
[   11.718872] testing the IO APIC.......................
[   11.719636] IO APIC #0......
[   11.720076] .... register #00: 00000000
[   11.720644] .......    : physical APIC id: 00
[   11.721299] .......    : Delivery Type: 0
[   11.721916] .......    : LTS          : 0
[   11.722507] .... register #01: 00170011
[   11.723080] .......     : max redirection entries: 17
[   11.723838] .......     : PRQ implemented: 0
[   11.724466] .......     : IO APIC version: 11
[   11.725123] .... register #02: 00000000
[   11.725693] .......     : arbitration: 00
[   11.726285] .... IRQ redirection table:
[   11.726864] IOAPIC 0:
[   11.727225]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.741580]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[   11.742786]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[   11.743990]  pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[   11.745202]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[   11.746471]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[   11.747747]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[   11.748924]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[   11.750088]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[   11.751248]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[   11.752405]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[   11.766075]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[   11.767397]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[   11.768716]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[   11.770020]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[   11.771359]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[   11.772669]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.774000]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.775148]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.776301]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.777458]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.788352]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.789517]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.790667]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   11.791811] IRQ to pin mappings:
[   11.792287] IRQ0 -> 0:2
[   11.792695] IRQ1 -> 0:1
[   11.793126] IRQ3 -> 0:3
[   11.793538] IRQ4 -> 0:4
[   11.793959] IRQ5 -> 0:5
[   11.794363] IRQ6 -> 0:6
[   11.794774] IRQ7 -> 0:7
[   11.795208] IRQ8 -> 0:8
[   11.795617] IRQ9 -> 0:9
[   11.796048] IRQ10 -> 0:10
[   11.817619] IRQ11 -> 0:11
[   11.818067] IRQ12 -> 0:12
[   11.818502] IRQ13 -> 0:13
[   11.818947] IRQ14 -> 0:14
[   11.819372] IRQ15 -> 0:15
[   11.819820] .................................... done.
[   11.825785] Btrfs loaded, crc32c=crc32c-generic, assert=on
[   11.826952] Key type trusted registered
[   11.827888] Key type encrypted registered
[   11.842957] console [netcon0] enabled
[   11.843605] netconsole: network logging started
[   11.845571] BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
[   11.846709] Bluetooth: Starting self testing
[   11.847388] Bluetooth: Finished self testing
[   11.852961] Freeing unused kernel memory: 1128K (ffffffff8296e000 - ffffffff82a88000)
[   11.854191] Write protecting the kernel read-only data: 24576k
[   11.857405] Freeing unused kernel memory: 1872K (ffff88000202c000 - ffff880002200000)
[   11.886365] Freeing unused kernel memory: 1264K (ffff8800026c4000 - ffff880002800000)
/etc/rcS.d/S00fbsetup: line 3: /sbin/modprobe: not found

Please wait: booting...
Starting udev
/etc/rcS.d/S03udev: line 72: can't create /proc/sys/kernel/hotplug: nonexistent directory
[   12.161205] BUG: unable to handle kernel NULL pointer dereference at 0000000000000012
[   12.162485] IP: [<ffffffff81245ecf>] sysfs_kf_write+0x4f/0x70
[   12.163414] PGD 1a380067 PUD 1a357067 PMD 0 
[   12.164242] Oops: 0000 [#1] PREEMPT SMP
[   12.164952] CPU: 0 PID: 240 Comm: udevadm Tainted: G        W       4.8.0-rc1-00021-gad05399 #1
[   12.166477] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   12.167885] task: ffff88001a3701c0 task.stack: ffff88001a374000
[   12.168789] RIP: 0010:[<ffffffff81245ecf>]  [<ffffffff81245ecf>] sysfs_kf_write+0x4f/0x70
[   12.170082] RSP: 0018:ffff88001a377dc0  EFLAGS: 00010297
[   12.171001] RAX: ffff88001aad9260 RBX: 0000000000000000 RCX: 0000000000000003
[   12.172252] RDX: ffff88001a253020 RSI: ffffffff82888fa0 RDI: ffff88001aada1f8
[   12.186536] RBP: ffff88001a377de8 R08: 0000000000000000 R09: 0000000000000000
[   12.187769] R10: 0000000055aab65f R11: 0000000000000001 R12: 0000000000000003
[   12.189058] R13: ffff88001a393000 R14: 000000000000000a R15: ffff88001a253020
[   12.190274] FS:  00007f1f13d8f700(0000) GS:ffff88001f400000(0000) knlGS:0000000000000000
[   12.191514] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   12.192393] CR2: 0000000000000012 CR3: 000000001a341000 CR4: 00000000000406b0
[   12.193518] Stack:
[   12.193884]  ffff88001a253020 ffff88001a393000 0000000000000003 ffffffff81245e80
[   12.195278]  ffff88001a393018 ffff88001a377e28 ffffffff81244e44 ffff88001a377f20
[   12.196679]  ffff88001dc6fc40 ffffffff81244cf0 ffff88001a377f20 0000000000000003
[   12.197896] Call Trace:
[   12.198289]  [<ffffffff81245e80>] ? sysfs_file_ops+0x90/0x90
[   12.199162]  [<ffffffff81244e44>] kernfs_fop_write+0x154/0x200
[   12.211238]  [<ffffffff81244cf0>] ? kernfs_vma_page_mkwrite+0xb0/0xb0
[   12.212330]  [<ffffffff811ae953>] __vfs_write+0x43/0x1b0
[   12.213150]  [<ffffffff811b369a>] ? __sb_start_write+0xba/0x110
[   12.214175]  [<ffffffff810d4612>] ? percpu_down_read+0x52/0x90
[   12.215219]  [<ffffffff811b369a>] ? __sb_start_write+0xba/0x110
[   12.216256]  [<ffffffff811aecd6>] vfs_write+0x106/0x1f0
[   12.217146]  [<ffffffff811aeed3>] SyS_write+0x53/0xc0
[   12.217930]  [<ffffffff820250b6>] entry_SYSCALL_64_fastpath+0x1e/0xad
[   12.218907] Code: ff ff 4d 85 e4 74 2d 49 89 c6 e8 0d 25 ee ff 49 8b 45 00 4c 89 e1 4c 89 fa 48 8b b0 80 00 00 00 48 8b 40 28 48 8b b8 80 00 00 00 <41> ff 56 08 48 89 c3 eb 00 e8 e3 24 ee ff 48 89 d8 5b 41 5c 41 
[   12.223712] RIP  [<ffffffff81245ecf>] sysfs_kf_write+0x4f/0x70
[   12.224633]  RSP <ffff88001a377dc0>
[   12.225172] CR2: 0000000000000012
[   12.366338] ---[ end trace b696b5aff8dfca8d ]---
[   12.367092] Kernel panic - not syncing: Fatal exception
[   12.367920] Kernel Offset: disabled

Elapsed time: 20
qemu-system-x86_64 -enable-kvm -cpu SandyBridge -kernel /pkg/linux/x86_64-randconfig-n0-08110915/gcc-6/ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104/vmlinuz-4.8.0-rc1-00021-gad05399 -append 'ip=::::vm-kbuild-yocto-x86_64-3::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-x86_64-3/boot-1-yocto-minimal-x86_64.cgz-ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104-20160812-122343-ax2dev-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-08110915 branch=linux-devel/devel-hourly-2016081104 commit=ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-08110915/gcc-6/ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104/vmlinuz-4.8.0-rc1-00021-gad05399 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-kbuild-yocto-x86_64/yocto-minimal-x86_64.cgz/x86_64-randconfig-n0-08110915/gcc-6/ad05399d68b6ae1649cdcfc82ce3ffea1a7c5104/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8'  -initrd /fs/sdg1/initrd-vm-kbuild-yocto-x86_64-3 -m 512 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -watchdog-action debug -rtc base=localtime -drive file=/fs/sdg1/disk0-vm-kbuild-yocto-x86_64-3,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-x86_64-3 -serial file:/dev/shm/kboot/serial-vm-kbuild-yocto-x86_64-3 -daemonize -display none -monitor null 
