early console in setup code
Probing EDD (edd=off to disable)... ok
[    0.000000] Linux version 4.8.0-rc1-00001-gc7de573 (kbuild@lkp-nex06) (gcc version 6.1.1 20160705 (Debian 6.1.1-9) ) #1 SMP PREEMPT Mon Aug 15 18:58:13 CST 2016
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fdffff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fe0000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fe0 max_arch_pfn = 0x1000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6630-0x000f663f] mapped at [400f6630]
[    0.000000]   mpc: f6640-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x03bfffff]
[    0.000000] Base memory trampoline at [4009b000] 9b000 size 16384
[    0.000000] BRK [0x02e5f000, 0x02e5ffff] PGTABLE
[    0.000000] BRK [0x02e60000, 0x02e60fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x13ba2000-0x13fdffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6460 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE16EE 000034 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE0C14 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 000BD4 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: SSDT 0x0000000013FE0C88 0009B6 (v01 BOCHS  BXPCSSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: APIC 0x0000000013FE163E 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE16B6 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13fe0000
[    0.000000]   low ram: 0 - 13fe0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13ba1001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 45887287239 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   Normal   [mem 0x0000000001000000-0x0000000013fdffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fdffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fdffff]
[    0.000000] On node 0 totalpages: 81790
[    0.000000] free_area_init_node: node 0, pgdat 41e2a640, node_mem_map 53921020
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   Normal zone: 608 pages used for memmap
[    0.000000]   Normal zone: 77792 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 17 pages/cpu @53907000 s46888 r0 d22744 u69632
[    0.000000] pcpu-alloc: s46888 r0 d22744 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 139099c0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81150
[    0.000000] Kernel command line: ip=::::vm-lkp-wsx03-openwrt-i386-11::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-openwrt-i386-11/boot-1-openwrt-i386.cgz-c7de573471832dff7d31f0c13b0f143d6f017799-20160815-37637-1fnmlqx-0.yaml ARCH=i386 kconfig=i386-randconfig-n0-201632 branch=balbi-usb/testing/next commit=c7de573471832dff7d31f0c13b0f143d6f017799 BOOT_IMAGE=/pkg/linux/i386-randconfig-n0-201632/gcc-6/c7de573471832dff7d31f0c13b0f143d6f017799/vmlinuz-4.8.0-rc1-00001-gc7de573 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-openwrt-i386/openwrt-i386.cgz/i386-randconfig-n0-201632/gcc-6/c7de573471832dff7d31f0c13b0f143d6f017799/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Memory: 288564K/327160K available (9880K kernel code, 1030K rwdata, 3648K rodata, 652K init, 15720K bss, 38596K reserved, 0K cma-reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfff17000 - 0xfffff000   ( 928 kB)
[    0.000000]     vmalloc : 0x547e0000 - 0xfff15000   (2743 MB)
[    0.000000]     lowmem  : 0x40000000 - 0x53fe0000   ( 319 MB)
[    0.000000]       .init : 0x41e3b000 - 0x41ede000   ( 652 kB)
[    0.000000]       .data : 0x419a6485 - 0x41e398c0   (4685 kB)
[    0.000000]       .text : 0x41000000 - 0x419a6485   (9881 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Running RCU self tests
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=53590000 soft=53592000
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 4911 kB
[    0.000000]  per task-struct memory footprint: 1344 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: HPET/PMTIMER calibration failed
[    0.000000] tsc: Detected 2260.998 MHz processor
[    2.438973] Calibrating delay loop (skipped) preset value.. 4523.41 BogoMIPS (lpj=7536660)
[    2.450617] pid_max: default: 4096 minimum: 301
[    2.457673] ACPI: Core revision 20160422
[    2.562868] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    2.571261] 
[    2.573760] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    2.581820] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    2.600073] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    2.607325] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    2.826486] Freeing SMP alternatives memory: 32K (41ede000 - 41ee6000)
[    2.928974] smpboot: Max logical packages: 1
[    2.938480] smpboot: APIC(0) Converting physical 0 to logical package 0
[    2.959059] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    2.967647] enabled ExtINT on CPU#0
[    2.998798] ENABLING IO-APIC IRQs
[    3.012465] init IO_APIC IRQs
[    3.020599]  apic 0 pin 0 not connected
[    3.032462] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    3.058028] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    3.084863] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    3.103169] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    3.126181] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    3.149734] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    3.171615] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    3.191347] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    3.211965] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    3.234833] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    3.255810] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    3.282219] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    3.304089] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    3.328462] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    3.351051] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    3.372305]  apic 0 pin 16 not connected
[    3.387081]  apic 0 pin 17 not connected
[    3.398133]  apic 0 pin 18 not connected
[    3.410578]  apic 0 pin 19 not connected
[    3.422761]  apic 0 pin 20 not connected
[    3.433489]  apic 0 pin 21 not connected
[    3.442271]  apic 0 pin 22 not connected
[    3.450663]  apic 0 pin 23 not connected
[    3.463719] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    3.478914] Using local APIC timer interrupts.
[    3.478914] calibrating APIC timer ...
[    3.635116] ... lapic delta = 7524266
[    3.643806] ... PM-Timer delta = 430839
[    3.656277] APIC calibration not consistent with PM-Timer: 120ms instead of 100ms
[    3.674882] APIC delta adjusted to PM-Timer: 6251386 (7524266)
[    3.698175] TSC delta adjusted to PM-Timer: 226090864 (272126480)
[    3.708909] ..... delta 6251386
[    3.717198] ..... mult: 268495011
[    3.729095] ..... calibration result: 3334072
[    3.738944] ..... CPU clock speed is 2261.0449 MHz.
[    3.760437] ..... host bus clock speed is 1000.1072 MHz.
[    3.775019] smpboot: CPU0: Intel QEMU Virtual CPU version 2.4.0 (family: 0x6, model: 0x6, stepping: 0x3)
[    3.804306] Performance Events: PMU not available due to virtualization, using software events only.
[    3.900204] x86: Booted up 1 node, 1 CPUs
[    3.906096] ----------------
[    3.919997] | NMI testsuite:
[    3.923274] --------------------
[    3.927936]   remote IPI:  ok  |
[    3.943004]    local IPI:  ok  |
[    3.975283] --------------------
[    3.979916] Good, all   2 testcases passed! |
[    3.985881] ---------------------------------
[    3.991909] smpboot: Total of 1 processors activated (4523.41 BogoMIPS)
[    4.032933] devtmpfs: initialized
[    4.097094] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    4.134402] prandom: seed boundary self test passed
[    4.159152] prandom: 100 self tests passed
[    4.176109] atomic64_test: passed for i586+ platform with CX8 and with SSE
[    4.190042] regulator-dummy: no parameters
[    4.213889] NET: Registered protocol family 16
[    4.281936] cpuidle: using governor menu
[    4.299794] ACPI: bus type PCI registered
[    4.331002] PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0
[    4.789650] ACPI: Added _OSI(Module Device)
[    4.795032] ACPI: Added _OSI(Processor Device)
[    4.800862] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.818292] ACPI: Added _OSI(Processor Aggregator Device)
[    4.960444] ACPI: Interpreter enabled
[    4.965731] ACPI: (supports S0 S5)
[    4.980342] ACPI: Using IOAPIC for interrupt routing
[    4.987701] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    5.383316] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    5.391869] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    5.409917] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    5.436429] PCI host bridge to bus 0000:00
[    5.442167] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    5.462451] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    5.482678] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    5.505940] pci_bus 0000:00: root bus resource [mem 0x14000000-0xfebfffff window]
[    5.526903] pci_bus 0000:00: root bus resource [bus 00-ff]
[    5.546509] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    5.582711] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    5.612268] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    5.682323] pci 0000:00:01.1: reg 0x20: [io  0xc0c0-0xc0cf]
[    5.721475] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    5.733136] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    5.741469] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    5.750902] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    5.787190] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    5.810785] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    5.830839] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    5.857869] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    5.936781] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    6.015333] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    6.147227] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    6.163237] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    6.192821] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    6.251640] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    6.412083] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    6.446238] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    6.507217] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    6.536739] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    6.742160] pci 0000:00:05.0: [1af4:1001] type 00 class 0x010000
[    6.806037] pci 0000:00:05.0: reg 0x10: [io  0xc080-0xc0bf]
[    6.866766] pci 0000:00:05.0: reg 0x14: [mem 0xfebf2000-0xfebf2fff]
[    7.097562] pci 0000:00:06.0: [8086:25ab] type 00 class 0x088000
[    7.142015] pci 0000:00:06.0: reg 0x10: [mem 0xfebf3000-0xfebf300f]
[    7.302586] pci_bus 0000:00: on NUMA node 0
[    7.362920] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    7.386153] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    7.416063] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    7.450614] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    7.484472] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    7.500099] ACPI: Enabled 16 GPEs in block 00 to 0F
[    7.565134] Linux video capture interface: v2.00
[    7.571874] pps_core: LinuxPPS API ver. 1 registered
[    7.589797] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    7.614842] PTP clock support registered
[    7.641092] PCI: Using ACPI for IRQ routing
[    7.646963] PCI: pci_cache_line_size set to 32 bytes
[    7.666692] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    7.685000] e820: reserve RAM buffer [mem 0x13fe0000-0x13ffffff]
[    7.711447] NET: Registered protocol family 23
[    7.728206] NET: Registered protocol family 8
[    7.734000] NET: Registered protocol family 20
[    7.753182] workqueue: round-robin CPU selection forced, expect performance impact
[    7.791009] nfc: nfc_init: NFC Core ver 0.1
[    7.810315] NET: Registered protocol family 39
[    7.852838] clocksource: Switched to clocksource kvm-clock
[    9.504800] pnp: PnP ACPI init
[    9.523108] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    9.549163] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    9.570254] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    9.598030] pnp 00:03: [dma 2]
[    9.602604] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    9.628007] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    9.651629] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    9.734525] pnp: PnP ACPI: found 6 devices
[    9.851768] PM-Timer running at invalid rate: 132% of normal - aborting.
[    9.865483] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    9.887097] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    9.906151] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    9.922964] pci_bus 0000:00: resource 7 [mem 0x14000000-0xfebfffff window]
[    9.943928] NET: Registered protocol family 2
[    9.966002] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    9.985677] TCP bind hash table entries: 4096 (order: 5, 147456 bytes)
[   10.033961] TCP: Hash tables configured (established 4096 bind 4096)
[   10.053494] UDP hash table entries: 256 (order: 2, 20480 bytes)
[   10.062284] UDP-Lite hash table entries: 256 (order: 2, 20480 bytes)
[   10.090695] NET: Registered protocol family 1
[   10.110307] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[   10.143585] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[   10.173200] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[   10.182504] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[   10.217632] PCI: CLS 0 bytes, default 32
[   10.243263] Unpacking initramfs...
[   19.810618] Freeing initrd memory: 4344K (53ba2000 - 53fe0000)
[   19.903097] PCLMULQDQ-NI instructions are not detected.
[   19.921902] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[   19.947083] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[   19.993031] spin_lock-torture: Creating torture_shuffle task
[   20.020962] spin_lock-torture: Creating torture_stutter task
[   20.029128] spin_lock-torture: torture_shuffle task started
[   20.036780] spin_lock-torture: Creating lock_torture_writer task
[   20.044522] spin_lock-torture: torture_stutter task started
[   20.053205] spin_lock-torture: Creating lock_torture_writer task
[   20.060763] spin_lock-torture: lock_torture_writer task started
[   20.071843] spin_lock-torture: Creating lock_torture_stats task
[   20.079553] spin_lock-torture: lock_torture_writer task started
[   20.088078] torture_init_begin: Refusing rcu init: spin_lock running.
[   20.097015] spin_lock-torture: lock_torture_stats task started
[   20.104929] torture_init_begin: One torture test at a time!
[   20.120322] futex hash table entries: 16 (order: -2, 1024 bytes)
[   20.129169] audit: initializing netlink subsys (disabled)
[   20.137560] audit: type=2000 audit(1471259776.993:1): initialized
[   20.163584] workingset: timestamp_bits=30 max_order=17 bucket_order=0
[   20.184968] DLM installed
[   20.193627] fuse init (API version 7.25)
[   20.315886] NET: Registered protocol family 38
[   20.324321] Key type asymmetric registered
[   20.330665] Asymmetric key parser 'x509' registered
[   20.338028] start plist test
[   20.363268] end plist test
[   20.367289] test_string_helpers: Running tests...
[   20.398880] test_hexdump: all 1184 tests passed
[   20.406694] test_firmware: interface ready
[   20.521215] test_hash: __hash_32() has no arch implementation to test.
[   20.530682] test_hash: hash_32() has no arch implementation to test.
[   20.539555] test_hash: hash_64() has no arch implementation to test.
[   20.548700] test_hash: 33152 tests passed.
[   20.554752] Running rhashtable test nelem=8, max_size=0, shrinking=0
[   20.563858] Test 00:
[   20.574626]   Adding 50000 keys
[   22.468886] Info: encountered resize
[   22.674821]   Traversal complete: counted=54185, nelems=50000, entries=50000, table-jumps=1
[   22.699647] Test failed: Total count mismatch ^^^  Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   24.260438]   Deleting 50000 keys
[   24.903082]   Duration of test: 4323344990 ns
[   24.919552] Test 01:
[   24.939767]   Adding 50000 keys
[   27.795613] Info: encountered resize
[   28.098255]   Traversal complete: counted=56056, nelems=50000, entries=50000, table-jumps=1
[   28.129585] Test failed: Total count mismatch ^^^  Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   30.112217]   Deleting 50000 keys
[   31.196494]   Duration of test: 6252284664 ns
[   31.213272] Test 02:
[   31.223263]   Adding 50000 keys
[   35.052514] Info: encountered resize
[   35.536732]   Traversal complete: counted=54507, nelems=50000, entries=50000, table-jumps=1
[   35.575902] Test failed: Total count mismatch ^^^  Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   37.243035]   Deleting 50000 keys
[   38.451454]   Duration of test: 7216920472 ns
[   38.458236] Test 03:
[   38.468533]   Adding 50000 keys
[   41.024709] Info: encountered resize
[   41.319184]   Traversal complete: counted=54284, nelems=50000, entries=50000, table-jumps=1
[   41.374629] Test failed: Total count mismatch ^^^  Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[   43.242184]   Deleting 50000 keys
[   44.432423]   Duration of test: 5959057344 ns
[   44.438426] Average test time: 5937901867
[   44.453812] Testing concurrent rhashtable access from 10 threads
[   80.419826] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  141.860443] Writes:  Total: 2  Max/Min: 0/0   Fail: 0 
[  191.361700] BUG: workqueue lockup - pool cpus=0 node=0 flags=0x0 nice=0 stuck for 59s!
[  191.415885] Showing busy workqueues and worker pools:
[  191.422202] workqueue events: flags=0x0
[  191.438343]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=4/256
[  191.450596]     in-flight: 20:rht_deferred_worker
[  191.477846]     pending: free_work, tsc_refine_calibration_work, vmstat_shepherd
[  191.493758] workqueue events_power_efficient: flags=0x80
[  191.531535]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=2/256
[  191.562619]     pending: check_lifetime, neigh_periodic_work
[  191.594147] workqueue vmstat: flags=0xc
[  191.598980]   pwq 0: cpus=0 node=0 flags=0x0 nice=0 active=1/256
[  191.627921]     pending: vmstat_update
[  191.633068] pool 0: cpus=0 node=0 flags=0x0 nice=0 hung=59s workers=2 idle: 4

Elapsed time: 230
qemu-system-i386 -enable-kvm -kernel /pkg/linux/i386-randconfig-n0-201632/gcc-6/c7de573471832dff7d31f0c13b0f143d6f017799/vmlinuz-4.8.0-rc1-00001-gc7de573 -append 'ip=::::vm-lkp-wsx03-openwrt-i386-11::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-openwrt-i386-11/boot-1-openwrt-i386.cgz-c7de573471832dff7d31f0c13b0f143d6f017799-20160815-37637-1fnmlqx-0.yaml ARCH=i386 kconfig=i386-randconfig-n0-201632 branch=balbi-usb/testing/next commit=c7de573471832dff7d31f0c13b0f143d6f017799 BOOT_IMAGE=/pkg/linux/i386-randconfig-n0-201632/gcc-6/c7de573471832dff7d31f0c13b0f143d6f017799/vmlinuz-4.8.0-rc1-00001-gc7de573 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-openwrt-i386/openwrt-i386.cgz/i386-randconfig-n0-201632/gcc-6/c7de573471832dff7d31f0c13b0f143d6f017799/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8'  -initrd /fs/sdc1/initrd-vm-lkp-wsx03-openwrt-i386-11 -m 320 -smp 1 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -watchdog-action debug -rtc base=localtime -drive file=/fs/sdc1/disk0-vm-lkp-wsx03-openwrt-i386-11,media=disk,if=virtio -drive file=/fs/sdc1/disk1-vm-lkp-wsx03-openwrt-i386-11,media=disk,if=virtio -pidfile /dev/shm/kboot/pid-vm-lkp-wsx03-openwrt-i386-11 -serial file:/dev/shm/kboot/serial-vm-lkp-wsx03-openwrt-i386-11 -daemonize -display none -monitor null 
