early console in setup code
early console in extract_kernel
input_data: 0x02993069
input_len: 0x00583d38
output: 0x01000000
output_len: 0x00f18c70
kernel_total_size: 0x01f2b000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.8.0-00006-g00da7da (kbuild@intel17) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #1 Wed Oct 12 20:45:53 CST 2016
[    0.000000] KERNEL supported cpus:
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   UMC UMC UMC UMC
[    0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[    0.000000] CPU: Your system may be unstable.
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
[    0.000000] x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
[    0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 0080000000 mask FF80000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at [c00f6640]
[    0.000000]   mpc: f6650-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x031fffff]
[    0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[    0.000000] BRK [0x02d1b000, 0x02d1bfff] PGTABLE
[    0.000000] BRK [0x02d1c000, 0x02d1cfff] PGTABLE
[    0.000000] BRK [0x02d1d000, 0x02d1dfff] PGTABLE
[    0.000000] BRK [0x02d1e000, 0x02d1efff] PGTABLE
[    0.000000] BRK [0x02d1f000, 0x02d1ffff] PGTABLE
[    0.000000] BRK [0x02d20000, 0x02d20fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x142ec000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6470 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E1737 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E1613 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 0015D3 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: APIC 0x00000000167E1687 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] 359MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 167e0000
[    0.000000]   low ram: 0 - 167e0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:142ea001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 12758871803 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000] free_area_init_node: node 0, pgdat c1dece80, node_mem_map d3de7028
[    0.000000]   Normal zone: 900 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 92030 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffb000 (        fee00000)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 1c0d100
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91130
[    0.000000] Kernel command line: ip=::::vm-vp-quantal-i386-37::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-i386-37/boot-1-quantal-core-i386.cgz-00da7dafbfd7d57e72ea4ca098570424e27d0949-20161013-88281-1ammmb3-1.yaml ARCH=i386 kconfig=i386-randconfig-s0-201641 branch=linux-devel/devel-spot-201610090337 commit=00da7dafbfd7d57e72ea4ca098570424e27d0949 BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201641/gcc-6/00da7dafbfd7d57e72ea4ca098570424e27d0949/vmlinuz-4.8.0-00006-g00da7da max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-s0-201641/gcc-6/00da7dafbfd7d57e72ea4ca098570424e27d0949/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw drbd.minor_count=8
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] allocated 372604 bytes of page_ext
[    0.000000] Memory: 295348K/368120K available (7922K kernel code, 2383K rwdata, 4348K rodata, 788K init, 14244K bss, 72772K reserved, 0K cma-reserved)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xfffa2000 - 0xfffff000   ( 372 kB)
[    0.000000]     vmalloc : 0xd6fe0000 - 0xfffa0000   ( 655 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xd67e0000   ( 359 MB)
[    0.000000]       .init : 0xc1e53000 - 0xc1f18000   ( 788 kB)
[    0.000000]       .data : 0xc17bce27 - 0xc1e51c80   (6739 kB)
[    0.000000]       .text : 0xc1000000 - 0xc17bce27   (7923 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=d3804000 soft=d3806000
[    0.000000] console [ttyS0] enabled
[    0.000000] console [ttyS0] enabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] bootconsole [earlyser0] disabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 5151 kB
[    0.000000]  per task-struct memory footprint: 2112 bytes
[    0.000000] ------------------------
[    0.000000] | Locking API testsuite:
[    0.000000] ----------------------------------------------------------------------------
[    0.000000]                                  | spin |wlock |rlock |mutex | wsem | rsem |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]                      A-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                  A-B-B-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-B-C-C-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]              A-B-C-A-B-C deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-B-C-C-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-D-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]          A-B-C-D-B-C-D-A deadlock:failed|failed|  ok  |failed|failed|failed|
[    0.000000]                     double unlock:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                   initialize held:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]                  bad unlock order:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]               recursive read-lock:             |  ok  |             |failed|
[    0.000000]            recursive read-lock #2:             |  ok  |             |failed|
[    0.000000]             mixed read-write-lock:             |failed|             |failed|
[    0.000000]             mixed write-read-lock:             |failed|             |failed|
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]      hard-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/12:failed|failed|  ok  |
[    0.000000]      hard-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]      soft-irqs-on + irq-safe-A/21:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/12:failed|failed|  ok  |
[    0.000000]        sirq-safe-A => hirqs-on/21:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/12:failed|failed|  ok  |
[    0.000000]          hard-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]          soft-safe-A + irqs-on/21:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #1/321:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/123:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/132:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/213:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/231:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/312:failed|failed|  ok  |
[    0.000000]     hard-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]     soft-safe-A + unsafe-B #2/321:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/123:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/132:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/213:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/231:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/312:failed|failed|  ok  |
[    0.000000]       hard-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       soft-irq lock-inversion/321:failed|failed|  ok  |
[    0.000000]       hard-irq read-recursion/123:  ok  |
[    0.000000]       soft-irq read-recursion/123:  ok  |
[    0.000000]       hard-irq read-recursion/132:  ok  |
[    0.000000]       soft-irq read-recursion/132:  ok  |
[    0.000000]       hard-irq read-recursion/213:  ok  |
[    0.000000]       soft-irq read-recursion/213:  ok  |
[    0.000000]       hard-irq read-recursion/231:  ok  |
[    0.000000]       soft-irq read-recursion/231:  ok  |
[    0.000000]       hard-irq read-recursion/312:  ok  |
[    0.000000]       soft-irq read-recursion/312:  ok  |
[    0.000000]       hard-irq read-recursion/321:  ok  |
[    0.000000]       soft-irq read-recursion/321:  ok  |
[    0.000000]   --------------------------------------------------------------------------
[    0.000000]   | Wound/wait tests |
[    0.000000]   ---------------------
[    0.000000]                   ww api failures:  ok  |  ok  |  ok  |
[    0.000000]                ww contexts mixing:failed|  ok  |
[    0.000000]              finishing ww context:  ok  |  ok  |  ok  |  ok  |
[    0.000000]                locking mismatches:  ok  |  ok  |  ok  |
[    0.000000]                  EDEADLK handling:  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |  ok  |
[    0.000000]            spinlock nest unlocked:  ok  |
[    0.000000]   -----------------------------------------------------
[    0.000000]                                  |block | try  |context|
[    0.000000]   -----------------------------------------------------
[    0.000000]                           context:failed|  ok  |  ok  |
[    0.000000]                               try:failed|  ok  |failed|
[    0.000000]                             block:failed|  ok  |failed|
[    0.000000]                          spinlock:failed|  ok  |failed|
[    0.000000] --------------------------------------------------------
[    0.000000] 141 out of 253 testcases failed, as expected. |
[    0.000000] ----------------------------------------------------
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2693.508 MHz processor
[    0.417498] Calibrating delay loop (skipped) preset value.. 5387.01 BogoMIPS (lpj=2693508)
[    0.420659] pid_max: default: 4096 minimum: 301
[    0.422443] ACPI: Core revision 20160422
[    0.435392] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.437378] 
[    0.437690] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.440288] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.444412] mce: CPU supports 10 MCE banks
[    0.446079] mce: unknown CPU type - not enabling MCE support
[    0.448201] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.450030] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.451094] CPU: GenuineIntel Intel Core Processor (Haswell) (family: 0x6, model: 0x3c, stepping: 0x1)
[    0.459170] ftrace: allocating 37253 entries in 73 pages
[    0.545055] Performance Events: no PMU driver, software events only.
[    0.546996] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.547993] enabled ExtINT on CPU#0
[    0.550128] ENABLING IO-APIC IRQs
[    0.550646] init IO_APIC IRQs
[    0.551294]  apic 0 pin 0 not connected
[    0.552013] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    0.553419] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    0.554643] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    0.555869] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    0.557030] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    0.558205] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    0.559416] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    0.560678] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    0.561850] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    0.563183] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    0.564351] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    0.565522] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    0.566842] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    0.567997] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    0.569219] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    0.570530]  apic 0 pin 16 not connected
[    0.571181]  apic 0 pin 17 not connected
[    0.571756]  apic 0 pin 18 not connected
[    0.572346]  apic 0 pin 19 not connected
[    0.572958]  apic 0 pin 20 not connected
[    0.573533]  apic 0 pin 21 not connected
[    0.574146]  apic 0 pin 22 not connected
[    0.574708]  apic 0 pin 23 not connected
[    0.575537] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.576723] TSC deadline timer enabled
[    0.577751] devtmpfs: initialized
[    0.581110] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[    0.582564] prandom: seed boundary self test passed
[    0.584095] prandom: 100 self tests passed
[    0.584689] atomic64_test: passed for i586+ platform with CX8 and with SSE
[    0.585640] pinctrl core: initialized pinctrl subsystem
[    0.587547] NET: Registered protocol family 16
[    0.589882] cpuidle: using governor ladder
[    0.591685] ACPI: bus type PCI registered
[    0.592263] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.593421] PCI: Using configuration type 1 for base access
[    0.618903] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.620677] gpio-f7188x: Not a Fintek device at 0x0000002e
[    0.621487] gpio-f7188x: Not a Fintek device at 0x0000004e
[    0.622436] ACPI: Added _OSI(Module Device)
[    0.623147] ACPI: Added _OSI(Processor Device)
[    0.623756] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.624419] ACPI: Added _OSI(Processor Aggregator Device)
[    0.632829] ACPI: Interpreter enabled
[    0.633485] ACPI: (supports S0 S3 S5)
[    0.634020] ACPI: Using IOAPIC for interrupt routing
[    0.634837] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.652639] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    0.653535] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    0.654362] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.657367] acpiphp: Slot [3] registered
[    0.658057] acpiphp: Slot [4] registered
[    0.658704] acpiphp: Slot [5] registered
[    0.659434] acpiphp: Slot [6] registered
[    0.660112] acpiphp: Slot [7] registered
[    0.660788] acpiphp: Slot [8] registered
[    0.661433] acpiphp: Slot [9] registered
[    0.662102] acpiphp: Slot [10] registered
[    0.663068] acpiphp: Slot [11] registered
[    0.663741] acpiphp: Slot [12] registered
[    0.664404] acpiphp: Slot [13] registered
[    0.665048] acpiphp: Slot [14] registered
[    0.665712] acpiphp: Slot [15] registered
[    0.668872] acpiphp: Slot [16] registered
[    0.669740] acpiphp: Slot [17] registered
[    0.670411] acpiphp: Slot [18] registered
[    0.671115] acpiphp: Slot [19] registered
[    0.671770] acpiphp: Slot [20] registered
[    0.672422] acpiphp: Slot [21] registered
[    0.673074] acpiphp: Slot [22] registered
[    0.673716] acpiphp: Slot [23] registered
[    0.674372] acpiphp: Slot [24] registered
[    0.675088] acpiphp: Slot [25] registered
[    0.675729] acpiphp: Slot [26] registered
[    0.676357] acpiphp: Slot [27] registered
[    0.677006] acpiphp: Slot [28] registered
[    0.677660] acpiphp: Slot [29] registered
[    0.678321] acpiphp: Slot [30] registered
[    0.679030] acpiphp: Slot [31] registered
[    0.679631] PCI host bridge to bus 0000:00
[    0.680204] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.681142] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.682090] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.687240] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[    0.688279] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.689094] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    0.694162] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    0.700678] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    0.710086] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    0.716841] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    0.717946] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    0.718827] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    0.722394] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    0.725625] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    0.728655] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    0.729712] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    0.737364] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    0.741454] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    0.752994] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    0.775419] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    0.777483] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    0.779943] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    0.782245] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    0.790848] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    0.792633] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    0.794621] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    0.801854] pci_bus 0000:00: on NUMA node 0
[    0.804752] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    0.806024] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    0.807326] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    0.809321] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    0.810422] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    0.812581] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.813396] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.814669] vgaarb: loaded
[    0.815144] vgaarb: bridge control possible 0000:00:02.0
[    0.816517] SCSI subsystem initialized
[    0.817168] libata version 3.00 loaded.
[    0.817953] pps_core: LinuxPPS API ver. 1 registered
[    0.818708] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.820110] PTP clock support registered
[    0.821160] wmi: Mapper loaded
[    0.821839] PCI: Using ACPI for IRQ routing
[    0.822487] PCI: pci_cache_line_size set to 64 bytes
[    0.823445] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    0.824347] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[    0.827269] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[    0.828128] hpet0: 3 comparators, 64-bit 100.000000 MHz counter
[    0.831167] clocksource: Switched to clocksource kvm-clock
[    0.833611] Warning: could not register annotated branches stats
[    0.884922] VFS: Disk quotas dquot_6.6.0
[    0.885568] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.886848] pnp: PnP ACPI init
[    0.887662] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.888802] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.889916] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    0.890897] pnp 00:03: [dma 2]
[    0.891442] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    0.892533] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    0.893597] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.894665] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.896233] pnp: PnP ACPI: found 7 devices
[    0.932860] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.934353] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.935416] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.936333] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.937327] pci_bus 0000:00: resource 7 [mem 0x16800000-0xfebfffff window]
[    0.938422] NET: Registered protocol family 2
[    0.939424] workqueue: round-robin CPU selection forced, expect performance impact
[    0.940782] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.942062] TCP bind hash table entries: 4096 (order: 5, 180224 bytes)
[    0.944338] TCP: Hash tables configured (established 4096 bind 4096)
[    0.945568] UDP hash table entries: 256 (order: 2, 24576 bytes)
[    0.946514] UDP-Lite hash table entries: 256 (order: 2, 24576 bytes)
[    0.947717] NET: Registered protocol family 1
[    0.948421] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    0.949307] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    0.950186] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    0.951228] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.952525] PCI: CLS 0 bytes, default 64
[    0.953458] Unpacking initramfs...
[    3.186986] debug: unmapping init [mem 0xd42ec000-0xd67dffff]
[    3.190414] cryptomgr_test (19) used greatest stack depth: 7400 bytes left
[    3.192522] spin_lock-torture:--- Start of test [debug]: nwriters_stress=2 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0
[    3.195091] spin_lock-torture: Creating torture_shuffle task
[    3.195978] spin_lock-torture: Creating torture_stutter task
[    3.196930] spin_lock-torture: torture_shuffle task started
[    3.197791] spin_lock-torture: Creating lock_torture_writer task
[    3.198735] spin_lock-torture: torture_stutter task started
[    3.199604] spin_lock-torture: Creating lock_torture_writer task
[    3.200556] spin_lock-torture: lock_torture_writer task started
[    3.201553] spin_lock-torture: Creating lock_torture_stats task
[    3.202476] spin_lock-torture: lock_torture_writer task started
[    3.203418] torture_init_begin: Refusing rcu init: spin_lock running.
[    3.204358] torture_init_begin: One torture test at a time!
[    3.205910] futex hash table entries: 16 (order: -3, 832 bytes)
[    3.206876] audit: initializing netlink subsys (disabled)
[    3.207621] spin_lock-torture: lock_torture_stats task started
[    3.208517] audit: type=2000 audit(1476327699.472:1): initialized
[    3.213290] Initialise system trusted keyrings
[    3.214105] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    3.230863] efs: 1.0a - http://aeschi.ch.eu.org/efs/
[    3.231843] romfs: ROMFS MTD (C) 2007 Red Hat, Inc.
[    3.233014] QNX4 filesystem 0.2.3 registered.
[    3.233878] qnx6: QNX6 filesystem 1.0.0 registered.
[    3.234623] orangefs_init: called with debug mask: :none: :0:
[    3.236109] orangefs: module version upstream loaded
[    3.237534] OCFS2 User DLM kernel interface loaded
[    3.240918] gfs2: GFS2 installed
[    3.241482] Key type big_key registered
[    3.250197] cryptomgr_test (81) used greatest stack depth: 7392 bytes left
[    3.253237] NET: Registered protocol family 38
[    3.253940] Key type asymmetric registered
[    3.254586] Asymmetric key parser 'x509' registered
[    3.255563] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    3.256665] io scheduler noop registered
[    3.257347] io scheduler deadline registered (default)
[    3.258098] start plist test
[    3.264242] end plist test
[    3.278592] test_hash: __hash_32() has no arch implementation to test.
[    3.279620] test_hash: hash_32() has no arch implementation to test.
[    3.280572] test_hash: hash_64() has no arch implementation to test.
[    3.281603] test_hash: 33152 tests passed.
[    3.282237] Running rhashtable test nelem=8, max_size=0, shrinking=0
[    3.283203] Test 00:
[    3.286486]   Adding 50000 keys
[    3.374443]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.436448]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.437697]   Deleting 50000 keys
[    3.490295]   Duration of test: 203297334 ns
[    3.491192] Test 01:
[    3.494704]   Adding 50000 keys
[    3.592658]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.727327]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.728470]   Deleting 50000 keys
[    3.796830]   Duration of test: 295254105 ns
[    3.797609] Test 02:
[    3.799297]   Adding 50000 keys
[    3.897781]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.979617]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    3.980817]   Deleting 50000 keys
[    4.058563]   Duration of test: 258831492 ns
[    4.059658] Test 03:
[    4.061266]   Adding 50000 keys
[    4.167097]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.235750] tsc: Refined TSC clocksource calibration: 2693.503 MHz
[    4.236540] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d3451f606, max_idle_ns: 440795333933 ns
[    4.249471]   Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0
[    4.250556]   Deleting 50000 keys
[    4.313496]   Duration of test: 251763291 ns
[    4.314241] Average test time: 252286555
[    4.314830] Testing concurrent rhashtable access from 10 threads
[    7.987590] rhashtable_thra (90) used greatest stack depth: 7032 bytes left
[    8.007547] Started 10 threads, 0 failed
[    8.015036] crc32: CRC_LE_BITS = 1, CRC_BE BITS = 1
[    8.016079] crc32: self tests passed, processed 225944 bytes in 2326194 nsec
[    8.019352] crc32c: CRC_LE_BITS = 1
[    8.019661] crc32c: self tests passed, processed 225944 bytes in 1320408 nsec
[    8.153215] crc32_combine: 8373 self tests passed
[    8.282976] crc32c_combine: 8373 self tests passed
[    8.283487] glob: 64 self-tests passed, 0 failed
[    8.284568] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    8.285212] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    8.287899] acpiphp_ibm: ibm_acpiphp_init: acpi_walk_namespace failed
[    8.289107] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[    8.289859] ACPI: Power Button [PWRF]
[    8.290564] button: probe of LNXPWRBN:00 failed with error -22
[    8.334405] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    8.359130] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    8.384207] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[    8.387502] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $
[    8.388475] ac.o: No PCI boards found.
[    8.388971] ac.o: For an ISA board you must supply memory and irq parameters.
[    8.389686] sonypi: Sony Programmable I/O Controller Driver v1.26.
[    8.390973] Non-volatile memory driver v1.3
[    8.391424] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[    8.392110] platform pc8736x_gpio.0: no device found
[    8.412744] nsc_gpio initializing
[    8.413132] telclk_interrupt = 0xf non-mcpbl0010 hw.
[    8.413615] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    8.418099] loop: module loaded
[    8.418637] MM: desc_per_page = 128
[    8.419318] rbd: loaded
[    8.420677] null: module loaded
[    8.421099] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded
[    8.421977] Uniform Multi-Platform E-IDE driver
[    8.422657] ide-cd driver 5.00
[    8.423036] Loading iSCSI transport class v2.0-870.
[    8.423696] rdac: device handler registered
[    8.424240] alua: device handler registered
[    8.424598] snic:SNIC Driver is supported only for x86_64 platforms!
[    8.425215] snic:Cisco SCSI NIC Driver, ver 0.0.1.18
[    8.425762] snic:Trace Facility Enabled.
[    8.425762]  Trace Buffer SZ 16 Pages.
[    8.426668] Adaptec aacraid driver 1.2-1[41066]-ms
[    8.427187] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[    8.427881] isci: Intel(R) C600 SAS Controller Driver - version 1.2.0
[    8.428963] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[    8.429924] LSI 3ware SAS/SATA-RAID Controller device driver for Linux v3.26.02.000.
[    8.431000] stex: Promise SuperTrak EX Driver version: 5.00.0000.01
[    8.431984] QLogic NetXtreme II iSCSI Driver bnx2i v2.7.10.1 (Jul 16, 2014)
[    8.433026] iscsi: registered transport (bnx2i)
[    8.433898] esas2r: driver will not be loaded because no ATTO esas2r devices were found
[    8.435103] SCSI Media Changer driver v0.25 
[    8.441784] scsi host0: scsi_debug: version 1.86 [20160430]
[    8.441784]   dev_size_mb=8, opts=0x0, submit_queues=1, statistics=0
[    8.444033] scsi 0:0:0:0: Direct-Access     Linux    scsi_debug       0186 PQ: 0 ANSI: 7
[    8.445800] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[    8.448018] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    8.449479] SSFDC read-only Flash Translation layer
[    8.450214] mtdoops: mtd device (mtddev=name/number) must be supplied
[    8.451163] Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.
[    8.452151] pmc551: not detected
[    8.452731] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
[    8.455314] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com)
[    8.457654] libphy: Fixed MDIO Bus: probed
[    8.459463] tun: Universal TUN/TAP device driver, 1.6
[    8.460139] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    8.461498] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[    8.462323] bna: QLogic BR-series 10G Ethernet driver - version: 3.2.25.1
[    8.463473] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[    8.464420] e1000: Copyright (c) 1999-2006 Intel Corporation.
[    8.602219] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
[    8.957421] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56
[    8.958053] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection
[    8.958678] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.0.2-k
[    8.959347] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    8.959897] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 4.4.0-k
[    8.960549] ixgbe: Copyright (c) 1999-2016 Intel Corporation.
[    8.961141] jme: JMicron JMC2XX ethernet driver version 1.0.8
[    8.962013] AX.25: bpqether driver version 004
[    8.962410] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI
[    8.963319] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    8.964728] serio: i8042 KBD port at 0x60,0x64 irq 1
[    8.965181] serio: i8042 AUX port at 0x60,0x64 irq 12
[    8.966724] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[    8.967508] evbug: Connected device: input1 (AT Translated Set 2 keyboard at isa0060/serio0/input0)
[    8.968574] __power_supply_register: Expected proper parent device for 'test_ac'
[    8.969270] power_supply test_ac: uevent
[    8.969629] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    8.970119] __power_supply_register: Expected proper parent device for 'test_battery'
[    8.970882] power_supply test_battery: uevent
[    8.971270] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    8.971893] thermal thermal_zone0: power_allocator: sustainable_power will be estimated
[    8.972575] __power_supply_register: Expected proper parent device for 'test_usb'
[    8.973279] power_supply test_usb: uevent
[    8.973652] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    8.974185] md: raid1 personality registered for level 1
[    8.974642] md: multipath personality registered for level -4
[    8.975188] md: faulty personality registered for level -5
[    8.975803] cpufreq_nforce2: No nForce2 chipset
[    8.978028] iscsi: registered transport (iser)
[    8.978813] rxe: loaded
[    8.979194] mostcore: init()
[    8.979940] aim_cdev: init()
[    8.980223] power_supply test_ac: power_supply_changed
[    8.980270] power_supply test_ac: power_supply_changed_work
[    8.980275] power_supply test_ac: uevent
[    8.980276] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[    8.980282] power_supply test_ac: prop ONLINE=1
[    8.982439] mostcore: registered new application interfacing module cdev
[    8.983001] aim_network: most_net_init()
[    8.983345] power_supply test_battery: power_supply_changed
[    8.983349] power_supply test_battery: power_supply_changed_work
[    8.983354] power_supply test_battery: uevent
[    8.983355] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[    8.983361] power_supply test_battery: prop STATUS=Discharging
[    8.983364] power_supply test_battery: prop CHARGE_TYPE=Fast
[    8.983365] power_supply test_battery: prop HEALTH=Good
[    8.983367] power_supply test_battery: prop PRESENT=1
[    8.983368] power_supply test_battery: prop TECHNOLOGY=Li-ion
[    8.983370] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[    8.983372] power_supply test_battery: prop CHARGE_FULL=100
[    8.983374] power_supply test_battery: prop CHARGE_NOW=50
[    8.983375] power_supply test_battery: prop CAPACITY=50
[    8.983382] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[    8.983384] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[    8.983386] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[    8.983387] power_supply test_battery: prop MODEL_NAME=Test battery
[    8.983389] power_supply test_battery: prop MANUFACTURER=Linux
[    8.983391] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-00006-g00da7da
[    8.983392] power_supply test_battery: prop TEMP=26
[    8.983394] power_supply test_battery: prop VOLTAGE_NOW=3300
[    8.984389] power_supply test_usb: power_supply_changed
[    8.984393] power_supply test_usb: power_supply_changed_work
[    8.984398] power_supply test_usb: uevent
[    8.984399] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[    8.984404] power_supply test_usb: prop ONLINE=1
[    8.995796] mostcore: registered new application interfacing module networking
[    8.996442] acerhdf: Acer Aspire One Fan driver, v.0.7.0
[    8.996903] acerhdf: unknown (unsupported) BIOS version QEMU/Standard PC (i440FX + PIIX, 1996)/Debian-1.8.2-1, please report, aborting!
[    8.998995] Audio Excel DSP 16 init driver Copyright (C) Riccardo Facchetti 1995-98
[    8.999659] aedsp16: I/O, IRQ and DMA are mandatory
[    9.000130] pss: mss_io, mss_dma, mss_irq and pss_io must be set.
[    9.000701] ad1848/cs4248 codec driver Copyright (C) by Hannu Savolainen 1993-1996
[    9.001352] ad1848: No ISAPnP cards found, trying standard ones...
[    9.001898] MediaTrix audio driver Copyright (C) by Hannu Savolainen 1993-1996
[    9.002500] I/O, IRQ, DMA and type are mandatory
[    9.002906] Pro Audio Spectrum driver Copyright (C) by Hannu Savolainen 1993-1996
[    9.003535] I/O, IRQ, DMA and type are mandatory
[    9.003934] sb: Init: Starting Probe...
[    9.004288] sb: Init: Done
[    9.004536] uart6850: irq and io must be set.
[    9.005222] netem: version 1.3
[    9.005591] ipip: IPv4 and MPLS over IPv4 tunneling driver
[    9.006399] NET: Registered protocol family 4
[    9.006822] NET: Registered protocol family 3
[    9.007250] NET: Registered protocol family 33
[    9.007639] Key type rxrpc registered
[    9.007960] Key type rxrpc_s registered
[    9.008325] NET: Registered protocol family 35
[    9.008866] 8021q: 802.1Q VLAN Support v1.8
[    9.009285] Key type dns_resolver registered
[    9.009694] Key type ceph registered
[    9.010200] libceph: loaded (mon/osd proto 15/24)
[    9.010786] batman_adv: B.A.T.M.A.N. advanced 2016.3 (compatibility version 15) loaded
[    9.011460] openvswitch: Open vSwitch switching datapath
[    9.012104] mpls_gso: MPLS GSO support
[    9.012478] mce: Unable to init device /dev/mcelog (rc: -5)
[    9.013747] ... APIC ID:      00000000 (0)
[    9.014103] ... APIC VERSION: 01050014
[    9.014426] 0000000000000000000000000000000000000000000000000000000000000000
[    9.015123] 0000000000000000000000000000000000000000000000000000000000000000
[    9.015828] 0000000000000000000000000000000000000000000000000000000000008000
[    9.016541] 
[    9.016689] number of MP IRQ sources: 15.
[    9.017040] number of IO-APIC #0 registers: 24.
[    9.017453] testing the IO APIC.......................
[    9.017920] IO APIC #0......
[    9.018163] .... register #00: 00000000
[    9.018491] .......    : physical APIC id: 00
[    9.018857] .......    : Delivery Type: 0
[    9.019194] .......    : LTS          : 0
[    9.019530] .... register #01: 00170011
[    9.019853] .......     : max redirection entries: 17
[    9.020280] .......     : PRQ implemented: 0
[    9.020637] .......     : IO APIC version: 11
[    9.021015] .... register #02: 00000000
[    9.021347] .......     : arbitration: 00
[    9.021705] .... IRQ redirection table:
[    9.022029] IOAPIC 0:
[    9.022247]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.022897]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[    9.023555]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[    9.024239]  pin03, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.024892]  pin04, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.025572]  pin05, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.026232]  pin06, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.026899]  pin07, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.027556]  pin08, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.028225]  pin09, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.028881]  pin0a, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.029563]  pin0b, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.030245]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[    9.030898]  pin0d, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.031549]  pin0e, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.033189]  pin0f, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.033877]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.034538]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.035197]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.035870]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.036531]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.037189]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.037870]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.038524]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[    9.039186] IRQ to pin mappings:
[    9.039459] IRQ0 -> 0:2
[    9.039691] IRQ1 -> 0:1
[    9.039927] IRQ3 -> 0:3
[    9.040157] IRQ4 -> 0:4
[    9.040400] IRQ5 -> 0:5
[    9.040630] IRQ6 -> 0:6
[    9.040866] IRQ7 -> 0:7
[    9.041095] IRQ8 -> 0:8
[    9.041335] IRQ9 -> 0:9
[    9.041595] IRQ10 -> 0:10
[    9.041853] IRQ11 -> 0:11
[    9.042096] IRQ12 -> 0:12
[    9.042355] IRQ13 -> 0:13
[    9.042597] IRQ14 -> 0:14
[    9.042844] IRQ15 -> 0:15
[    9.043087] .................................... done.
[    9.043526] Using IPI Shortcut mode
[    9.044853] Loading compiled-in X.509 certificates
[    9.056344] Key type encrypted registered
[    9.057336] hd: no drives specified - use hd=cyl,head,sectors on kernel command line
[    9.058155] console [netcon0] enabled
[    9.058490] netconsole: network logging started
[    9.059481] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[    9.061674] ### dt-test ### start of unittest - you will see error messages
[    9.062478] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    9.063510] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[    9.064561] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[    9.065200] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[    9.065841] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    9.066514] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[    9.067409] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[    9.068968] ### dt-test ### end of unittest - 129 passed, 0 failed
[    9.070018] 8021q: adding VLAN 0 to HW filter on device bond0
[    9.073141] 8021q: adding VLAN 0 to HW filter on device eth0
[   11.083678] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[   11.110330] Sending DHCP requests ., OK
[   12.112271] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15
[   12.113525] IP-Config: Complete:
[   12.114029]      device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2
[   12.115135]      host=vm-vp-quantal-i386-37, domain=, nis-domain=(none)
[   12.115905]      bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath=     nameserver0=10.0.2.3
[   12.146395] debug: unmapping init [mem 0xc1e53000-0xc1f17fff]
[   12.147331] Write protecting the kernel text: 7924k
[   12.148042] Write protecting the kernel read-only data: 4356k
[   12.148719] NX-protecting the kernel data: 8460k
[   12.150891] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[   12.161229] random: init: uninitialized urandom read (12 bytes read)
[   12.170017] hostname (169) used greatest stack depth: 6880 bytes left
[   12.190659] sh (174) used greatest stack depth: 6800 bytes left
[   12.192357] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[   12.193520] in_atomic(): 1, irqs_disabled(): 1, pid: 175, name: init
[   12.194234] 3 locks held by init/175:
[   12.194647]  #0:  (&tty->legacy_mutex){......}, at: [<c13ab8eb>] tty_lock+0x76/0x7e
[   12.195619]  #1:  (&port->mutex){......}, at: [<c13b05b2>] uart_open+0x4c/0xd7
[   12.196521]  #2:  (&irq_desc_lock_class){......}, at: [<c1067b71>] __setup_irq+0x15c/0x493
[   12.197548] CPU: 0 PID: 175 Comm: init Tainted: G S              4.8.0-00006-g00da7da #1
[   12.198463] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   12.199455]  00000000 c9b62280 c9b5fc58 c12f6835 c9b5fc68 c1050bc2 00000000 00000000
[   12.200447]  c9b5fc84 c1050c68 0000026c c1aba08a c1d67340 00000000 00000000 c9b5fcb8
[   12.201436]  c17b8497 00000046 c9b5fcd0 c105dd09 c9b626d8 c9b62628 00000046 c9b626ac
[   12.202423] Call Trace:
[   12.202723]  [<c12f6835>] dump_stack+0x16/0x18
[   12.203238]  [<c1050bc2>] ___might_sleep+0xf5/0xfc
[   12.203785]  [<c1050c68>] __might_sleep+0x9f/0xa7
[   12.204335]  [<c17b8497>] mutex_lock_nested+0x23/0x32c
[   12.204933]  [<c105dd09>] ? lock_release+0x122/0x317
[   12.205503]  [<c10ef8fe>] pcpu_alloc+0xbb/0x41a
[   12.206021]  [<c105fd51>] ? do_raw_spin_unlock+0xa2/0xcb
[   12.206616]  [<c17bafaf>] ? _raw_spin_unlock_irqrestore+0x2c/0x36
[   12.207308]  [<c101b304>] ? startup_ioapic_irq+0x5e/0x68
[   12.207919]  [<c10efc83>] __alloc_percpu+0x14/0x16
[   12.208464]  [<c106c6aa>] irq_timings_alloc+0x1a/0x57
[   12.209042]  [<c1067d65>] __setup_irq+0x350/0x493
[   12.209576]  [<c106806f>] request_threaded_irq+0x11d/0x14b
[   12.210205]  [<c13b1deb>] univ8250_setup_irq+0x174/0x1bf
[   12.210821]  [<c13b3da5>] serial8250_do_startup+0x303/0x491
[   12.211451]  [<c13b3f4b>] serial8250_startup+0x18/0x1a
[   12.212037]  [<c13b04b6>] uart_startup+0x8b/0x13b
[   12.212567]  [<c13b0613>] uart_open+0xad/0xd7
[   12.213066]  [<c13a6200>] tty_open+0x239/0x34c
[   12.213580]  [<c111c68d>] ? chrdev_open+0xc2/0x148
[   12.214132]  [<c111c6fa>] chrdev_open+0x12f/0x148
[   12.214668]  [<c1117331>] do_dentry_open+0x1cd/0x2b5
[   12.215310]  [<c111c5cb>] ? cdev_put+0x1f/0x1f
[   12.215820]  [<c1117dd3>] vfs_open+0x75/0x7c
[   12.216307]  [<c1126178>] path_openat+0x695/0x85b
[   12.216853]  [<c100aa00>] ? hw_breakpoint_exceptions_notify+0x14e/0x16e
[   12.217590]  [<c1126372>] do_filp_open+0x34/0x9c
[   12.218130]  [<c105fd51>] ? do_raw_spin_unlock+0xa2/0xcb
[   12.218727]  [<c17baf18>] ? _raw_spin_unlock+0x22/0x2b
[   12.219314]  [<c113147b>] ? __alloc_fd+0x11b/0x126
[   12.219859]  [<c1117f7f>] do_sys_open+0x5f/0xd4
[   12.220371]  [<c1118011>] SyS_open+0x1d/0x1f
[   12.220860]  [<c100152e>] do_fast_syscall_32+0xb4/0xf3
[   12.221435]  [<c17bb663>] sysenter_past_esp+0x40/0x6a
[   12.241872] random: trinity: uninitialized urandom read (4 bytes read)
[   12.253291] mountall (175) used greatest stack depth: 6332 bytes left
mountall: Event failed
[   12.276453] random: mountall: uninitialized urandom read (12 bytes read)
[   12.293795] init: Failed to create pty - disabling logging for job
[   12.294654] init: Temporary process spawn error: No such file or directory
[   12.308742] init: Failed to create pty - disabling logging for job
[   12.309588] init: Temporary process spawn error: No such file or directory
[   12.341027] init: Failed to create pty - disabling logging for job
[   12.341887] init: Temporary process spawn error: No such file or directory
[   12.345955] init: Failed to create pty - disabling logging for job
[   12.346985] init: Temporary process spawn error: No such file or directory
[   12.410663] init: Failed to create pty - disabling logging for job
[   12.411538] init: Temporary process spawn error: No such file or directory
[   12.416518] init: Failed to create pty - disabling logging for job
[   12.420301] init: Temporary process spawn error: No such file or directory
[   12.431331] init: Failed to create pty - disabling logging for job
[   12.435211] init: Temporary process spawn error: No such file or directory
[   12.443390] udevd[236]: starting version 175
[   12.453453] init: Failed to create pty - disabling logging for job
[   12.454529] init: Temporary process spawn error: No such file or directory
[   12.460896] init: Failed to create pty - disabling logging for job
[   12.461734] init: Temporary process spawn error: No such file or directory
[   12.469388] init: Failed to create pty - disabling logging for job
[   12.470249] init: Temporary process spawn error: No such file or directory
[   12.485877] init: Failed to create pty - disabling logging for job
[   12.489327] init: Temporary process spawn error: No such file or directory
[   12.492829] init: Failed to create pty - disabling logging for job
[   12.493647] init: Temporary process spawn error: No such file or directory
udevd[248]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYSTM:': No such file or directory
udevd[249]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXPWRBN:': No such file or directory
[   12.575724] power_supply test_ac: uevent
[   12.576081] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   12.577191] power_supply test_ac: prop ONLINE=1
[   12.578219] power_supply test_battery: uevent
[   12.578593] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   12.579125] power_supply test_battery: prop STATUS=Discharging
[   12.579612] power_supply test_battery: prop CHARGE_TYPE=Fast
[   12.580083] power_supply test_battery: prop HEALTH=Good
[   12.580519] power_supply test_battery: prop PRESENT=1
[   12.581001] power_supply test_battery: prop TECHNOLOGY=Li-ion
[   12.586202] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[   12.586736] power_supply test_battery: prop CHARGE_FULL=100
[   12.587210] power_supply test_battery: prop CHARGE_NOW=50
[   12.587656] power_supply test_battery: prop CAPACITY=50
[   12.588340] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   12.592600] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   12.592604] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   12.592607] power_supply test_battery: prop MODEL_NAME=Test battery
[   12.592610] power_supply test_battery: prop MANUFACTURER=Linux
[   12.592613] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-00006-g00da7da
[   12.592617] power_supply test_battery: prop TEMP=26
[   12.592620] power_supply test_battery: prop VOLTAGE_NOW=3300
[   12.592801] power_supply test_usb: uevent
[   12.592803] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   12.592811] power_supply test_usb: prop ONLINE=1
[   12.678791] init: Failed to create pty - disabling logging for job
[   12.678880] init: Temporary process spawn error: No such file or directory
[   12.685942] init: Failed to create pty - disabling logging for job
[   12.686052] init: Temporary process spawn error: No such file or directory
udevd[263]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d000025ABsv00001AF4sd00001100bc08sc80i00': No such file or directory
udevd[262]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory
udevd[261]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory
udevd[269]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00': No such file or directory
udevd[266]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00001234d00001111sv00001AF4sd00001100bc03sc00i00': No such file or directory
udevd[267]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007113sv00001AF4sd00001100bc06sc80i00': No such file or directory
udevd[268]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007010sv00001AF4sd00001100bc01sc01i80': No such file or directory
udevd[270]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:QEMU0002:': No such file or directory
udevd[273]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory
udevd[274]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:dell_rbu': No such file or directory
udevd[277]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:Fixed MDIO bus': No such file or directory
udevd[279]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw': No such file or directory
udevd[280]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv serio:ty01pr00id00ex00': No such file or directory
udevd[284]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:platform-framebuffer': No such file or directory
udevd[286]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv of:Ntestcase-device1T<NULL>Ctestcase-device': No such file or directory
udevd[291]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv of:Ntestcase-device2T<NULL>Ctestcase-device': No such file or directory
udevd[292]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv scsi:t-0x00': No such file or directory
udevd[260]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00': No such file or directory
udevd[300]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory
udevd[304]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[301]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A03:': No such file or directory
udevd[302]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[303]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
[   12.872904] random: fast init done
udevd[305]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[306]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory
udevd[313]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv dmi:bvnSeaBIOS:bvrDebian-1.8.2-1:bd04/01/2014:svnQEMU:pnStandardPC(i440FX+PIIX,1996):pvrpc-i440fx-2.6:cvnQEMU:ct1:cvrpc-i440fx-2.6:': No such file or directory
udevd[299]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory
udevd[314]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[316]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[318]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[317]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:QEMU0002:': No such file or directory
udevd[315]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory
udevd[344]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0303:': No such file or directory
udevd[345]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0400:': No such file or directory
udevd[346]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory
udevd[348]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0700:': No such file or directory
udevd[349]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0B00:': No such file or directory
udevd[347]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory
udevd[350]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0F13:': No such file or directory
[   13.138436] power_supply test_ac: uevent
[   13.139115] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   13.150139] power_supply test_ac: prop ONLINE=1
[   13.151155] power_supply test_ac: uevent
[   13.166008] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   13.173808] power_supply test_ac: prop ONLINE=1
[   13.174812] power_supply test_ac: uevent
[   13.185645] power_supply test_battery: uevent
[   13.185648] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   13.185656] power_supply test_battery: prop STATUS=Discharging
[   13.185660] power_supply test_battery: prop CHARGE_TYPE=Fast
[   13.185662] power_supply test_battery: prop HEALTH=Good
[   13.185665] power_supply test_battery: prop PRESENT=1
[   13.185668] power_supply test_battery: prop TECHNOLOGY=Li-ion
[   13.185671] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[   13.185674] power_supply test_battery: prop CHARGE_FULL=100
[   13.185677] power_supply test_battery: prop CHARGE_NOW=50
[   13.185680] power_supply test_battery: prop CAPACITY=50
[   13.185683] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   13.185686] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   13.185699] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   13.185703] power_supply test_battery: prop MODEL_NAME=Test battery
[   13.185705] power_supply test_battery: prop MANUFACTURER=Linux
[   13.185709] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-00006-g00da7da
[   13.185711] power_supply test_battery: prop TEMP=26
[   13.185714] power_supply test_battery: prop VOLTAGE_NOW=3300
[   13.185982] power_supply test_battery: uevent
[   13.185984] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   13.185991] power_supply test_battery: prop STATUS=Discharging
[   13.185995] power_supply test_battery: prop CHARGE_TYPE=Fast
[   13.185997] power_supply test_battery: prop HEALTH=Good
[   13.186000] power_supply test_battery: prop PRESENT=1
[   13.186002] power_supply test_battery: prop TECHNOLOGY=Li-ion
[   13.186006] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[   13.186008] power_supply test_battery: prop CHARGE_FULL=100
[   13.186011] power_supply test_battery: prop CHARGE_NOW=50
[   13.186013] power_supply test_battery: prop CAPACITY=50
[   13.186016] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   13.186018] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   13.186021] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   13.186024] power_supply test_battery: prop MODEL_NAME=Test battery
[   13.186026] power_supply test_battery: prop MANUFACTURER=Linux
[   13.186029] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-00006-g00da7da
[   13.186031] power_supply test_battery: prop TEMP=26
[   13.186034] power_supply test_battery: prop VOLTAGE_NOW=3300
[   13.189623] power_supply test_battery: uevent
[   13.189625] power_supply test_battery: POWER_SUPPLY_NAME=test_battery
[   13.189633] power_supply test_battery: prop STATUS=Discharging
[   13.189636] power_supply test_battery: prop CHARGE_TYPE=Fast
[   13.189639] power_supply test_battery: prop HEALTH=Good
[   13.189642] power_supply test_battery: prop PRESENT=1
[   13.189644] power_supply test_battery: prop TECHNOLOGY=Li-ion
[   13.189647] power_supply test_battery: prop CHARGE_FULL_DESIGN=100
[   13.189650] power_supply test_battery: prop CHARGE_FULL=100
[   13.189660] power_supply test_battery: prop CHARGE_NOW=50
[   13.189663] power_supply test_battery: prop CAPACITY=50
[   13.189666] power_supply test_battery: prop CAPACITY_LEVEL=Normal
[   13.189669] power_supply test_battery: prop TIME_TO_EMPTY_AVG=3600
[   13.189671] power_supply test_battery: prop TIME_TO_FULL_NOW=3600
[   13.189673] power_supply test_battery: prop MODEL_NAME=Test battery
[   13.189676] power_supply test_battery: prop MANUFACTURER=Linux
[   13.189679] power_supply test_battery: prop SERIAL_NUMBER=4.8.0-00006-g00da7da
[   13.189681] power_supply test_battery: prop TEMP=26
[   13.189683] power_supply test_battery: prop VOLTAGE_NOW=3300
[   13.203417] power_supply test_usb: uevent
[   13.203419] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   13.203428] power_supply test_usb: prop ONLINE=1
[   13.203662] power_supply test_usb: uevent
[   13.203664] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   13.203671] power_supply test_usb: prop ONLINE=1
[   13.203857] power_supply test_usb: uevent
[   13.203859] power_supply test_usb: POWER_SUPPLY_NAME=test_usb
[   13.203866] power_supply test_usb: prop ONLINE=1
[   13.240391] init: Failed to create pty - disabling logging for job
[   13.240448] init: Temporary process spawn error: No such file or directory
[   13.602210] power_supply test_ac: POWER_SUPPLY_NAME=test_ac
[   13.602218] power_supply test_ac: prop ONLINE=1
[   13.603446] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[   13.604296] in_atomic(): 1, irqs_disabled(): 1, pid: 377, name: init
[   13.604818] 3 locks held by init/377:
[   13.605120]  #0:  (&tty->legacy_mutex){......}, at: [<c13ab8eb>] tty_lock+0x76/0x7e
[   13.606390]  #1:  (&port->mutex){......}, at: [<c13b05b2>] uart_open+0x4c/0xd7
[   13.607615]  #2:  (&irq_desc_lock_class){......}, at: [<c1067b71>] __setup_irq+0x15c/0x493
[   13.608952] CPU: 0 PID: 377 Comm: init Tainted: G S              4.8.0-00006-g00da7da #1
[   13.610198] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   13.611497]  00000000 c973b3c0 c96ffc58 c12f6835 c96ffc68 c1050bc2 00000000 00000000
[   13.612741]  c96ffc84 c1050c68 0000026c c1aba08a c1d67340 00000000 00000000 c96ffcb8
[   13.614052]  c17b8497 00000046 c96ffcd0 c105dd09 c973b818 c973b768 00000046 c973b7ec
[   13.615353] Call Trace:
[   13.615729]  [<c12f6835>] dump_stack+0x16/0x18
[   13.616389]  [<c1050bc2>] ___might_sleep+0xf5/0xfc
[   13.617117]  [<c1050c68>] __might_sleep+0x9f/0xa7
[   13.617857]  [<c17b8497>] mutex_lock_nested+0x23/0x32c
[   13.618652]  [<c105dd09>] ? lock_release+0x122/0x317
[   13.619402]  [<c10ef8fe>] pcpu_alloc+0xbb/0x41a
[   13.620073]  [<c105fd51>] ? do_raw_spin_unlock+0xa2/0xcb
[   13.620840]  [<c17bafaf>] ? _raw_spin_unlock_irqrestore+0x2c/0x36
[   13.621761]  [<c101b304>] ? startup_ioapic_irq+0x5e/0x68
[   13.622598]  [<c10efc83>] __alloc_percpu+0x14/0x16
[   13.623353]  [<c106c6aa>] irq_timings_alloc+0x1a/0x57
[   13.624085]  [<c1067d65>] __setup_irq+0x350/0x493
[   13.624749]  [<c106806f>] request_threaded_irq+0x11d/0x14b
[   13.625535]  [<c13b1deb>] univ8250_setup_irq+0x174/0x1bf
[   13.626310]  [<c13b3da5>] serial8250_do_startup+0x303/0x491
[   13.627138]  [<c13b3f4b>] serial8250_startup+0x18/0x1a
[   13.627892]  [<c13b04b6>] uart_startup+0x8b/0x13b
[   13.628578]  [<c13b0613>] uart_open+0xad/0xd7
[   13.629215]  [<c13a6200>] tty_open+0x239/0x34c
[   13.629903]  [<c111c68d>] ? chrdev_open+0xc2/0x148
[   13.630646]  [<c111c6fa>] chrdev_open+0x12f/0x148
[   13.631386]  [<c1117331>] do_dentry_open+0x1cd/0x2b5
[   13.632253]  [<c111c5cb>] ? cdev_put+0x1f/0x1f
[   13.632876]  [<c1117dd3>] vfs_open+0x75/0x7c
[   13.633494]  [<c1126178>] path_openat+0x695/0x85b
[   13.634192]  [<c100aa00>] ? hw_breakpoint_exceptions_notify+0x14e/0x16e
[   13.635158]  [<c1126372>] do_filp_open+0x34/0x9c
[   13.635845]  [<c105fd51>] ? do_raw_spin_unlock+0xa2/0xcb
[   13.636628]  [<c17baf18>] ? _raw_spin_unlock+0x22/0x2b
[   13.637391]  [<c113147b>] ? __alloc_fd+0x11b/0x126
[   13.638107]  [<c1117f7f>] do_sys_open+0x5f/0xd4
[   13.638789]  [<c1118011>] SyS_open+0x1d/0x1f
[   13.639427]  [<c100152e>] do_fast_syscall_32+0xb4/0xf3
[   13.640195]  [<c17bb663>] sysenter_past_esp+0x40/0x6a
[   13.692685] init: Failed to create pty - disabling logging for job
[   13.694311] init: Temporary process spawn error: No such file or directory
[   13.775546] init: failsafe main process (377) killed by TERM signal
[   14.014315] init: Failed to create pty - disabling logging for job
[   14.015378] init: Temporary process spawn error: No such file or directory
[   14.029640] init: Failed to create pty - disabling logging for job
[   14.031261] init: Temporary process spawn error: No such file or directory
[   14.039128] init: Failed to create pty - disabling logging for job
[   14.039956] init: Temporary process spawn error: No such file or directory
[   14.051495] init: Failed to create pty - disabling logging for job
[   14.053291] init: Temporary process spawn error: No such file or directory
[   14.061811] init: Failed to create pty - disabling logging for job
[   14.062630] init: Temporary process spawn error: No such file or directory
start: Job is already running: rc
[   14.142716] init: Failed to create pty - disabling logging for job
[   14.143803] init: Temporary process spawn error: No such file or directory
[   14.155869] init: udev-fallback-graphics main process (427) terminated with status 127
[   14.160010] init: Failed to create pty - disabling logging for job
[   14.160924] init: Temporary process spawn error: No such file or directory
[   14.167690] init: Failed to create pty - disabling logging for job
[   14.168480] init: Temporary process spawn error: No such file or directory
PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin
[   14.176655] init: Failed to create pty - disabling logging for job
[   14.177353] init: Temporary process spawn error: No such file or directory
[   14.206826] init: networking main process (439) terminated with status 1
Kernel tests: Boot OK!
Kernel tests: Boot OK!
LKP: HOSTNAME vm-vp-quantal-i386-37, MAC 1e:ac:65:f9:ae:5d, kernel 4.8.0-00006-g00da7da 1, serial console /dev/ttyS0
umount: /tmp: device is busy.
        (In some cases useful info about processes that use
         the device is found by lsof(8) or fuser(1))
Trinity v1.4pre  Dave Jones <davej@redhat.com>
[init] Marking syscall get_robust_list (312) as to be disabled.
Done parsing arguments.
Marking all syscalls as enabled.
[init] Disabling syscalls marked as disabled by command line options
[init] Marked syscall get_robust_list (312) as deactivated.
[init] Enabled 350 syscalls. Disabled 1 syscalls.
DANGER: RUNNING AS ROOT.
Unless you are running in a virtual machine, this could cause serious problems such as overwriting CMOS
or similar which could potentially make this machine unbootable without a firmware reset.

ctrl-c now unless you really know what you are doing.
[   14.558680] /lkp/lkp/src/bin/run-lkp
[   14.621073] RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-s0-201641/gcc-6/00da7dafbfd7d57e72ea4ca098570424e27d0949/0
[   14.628258] job=/lkp/scheduled/vm-vp-quantal-i386-37/boot-1-quantal-core-i386.cgz-00da7dafbfd7d57e72ea4ca098570424e27d0949-20161013-88281-1ammmb3-1.yaml
[   14.634003] run-job /lkp/scheduled/vm-vp-quantal-i386-37/boot-1-quantal-core-i386.cgz-00da7dafbfd7d57e72ea4ca098570424e27d0949-20161013-88281-1ammmb3-1.yaml
[   14.640282] Cannot find wget/curl.
[   14.640648] 
[   14.748763] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:620
[   14.749686] in_atomic(): 1, irqs_disabled(): 1, pid: 546, name: kmsg
[   14.750218] 3 locks held by kmsg/546:
[   14.750526]  #0:  (&tty->legacy_mutex){......}, at: [<c13ab8eb>] tty_lock+0x76/0x7e
[   14.751244]  #1:  (&port->mutex){......}, at: [<c13b05b2>] uart_open+0x4c/0xd7
[   14.751948]  #2:  (&irq_desc_lock_class){......}, at: [<c1067b71>] __setup_irq+0x15c/0x493
[   14.752694] CPU: 0 PID: 546 Comm: kmsg Tainted: G S              4.8.0-00006-g00da7da #1
[   14.753364] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   14.754095]  00000000 c892c500 c8969c58 c12f6835 c8969c68 c1050bc2 00000000 00000000
[   14.754843]  c8969c84 c1050c68 0000026c c1aba08a c1d67340 00000000 00000000 c8969cb8
[   14.755608]  c17b8497 00000046 c8969cd0 c105dd09 c892c958 c892c8a8 00000046 c892c92c
[   14.756415] Call Trace:
[   14.756629]  [<c12f6835>] dump_stack+0x16/0x18
[   14.757009]  [<c1050bc2>] ___might_sleep+0xf5/0xfc
[   14.757409]  [<c1050c68>] __might_sleep+0x9f/0xa7
[   14.757807]  [<c17b8497>] mutex_lock_nested+0x23/0x32c
[   14.758235]  [<c105dd09>] ? lock_release+0x122/0x317
[   14.758647]  [<c10ef8fe>] pcpu_alloc+0xbb/0x41a
[   14.759031]  [<c105fd51>] ? do_raw_spin_unlock+0xa2/0xcb
[   14.759472]  [<c17bafaf>] ? _raw_spin_unlock_irqrestore+0x2c/0x36
[   14.760016]  [<c101b304>] ? startup_ioapic_irq+0x5e/0x68
[   14.760460]  [<c10efc83>] __alloc_percpu+0x14/0x16
[   14.760864]  [<c106c6aa>] irq_timings_alloc+0x1a/0x57
[   14.761288]  [<c1067d65>] __setup_irq+0x350/0x493
[   14.761682]  [<c106806f>] request_threaded_irq+0x11d/0x14b
[   14.762148]  [<c13b1deb>] univ8250_setup_irq+0x174/0x1bf
[   14.762634]  [<c13b3da5>] serial8250_do_startup+0x303/0x491
[   14.763102]  [<c13b3f4b>] serial8250_startup+0x18/0x1a
[   14.763528]  [<c13b04b6>] uart_startup+0x8b/0x13b
[   14.763952]  [<c13b0613>] uart_open+0xad/0xd7
[   14.764315]  [<c13a6200>] tty_open+0x239/0x34c
[   14.764686]  [<c111c68d>] ? chrdev_open+0xc2/0x148
[   14.765090]  [<c111c6fa>] chrdev_open+0x12f/0x148
[   14.765483]  [<c1117331>] do_dentry_open+0x1cd/0x2b5
[   14.765956]  [<c111c5cb>] ? cdev_put+0x1f/0x1f
[   14.766329]  [<c1117dd3>] vfs_open+0x75/0x7c
[   14.766689]  [<c1126178>] path_openat+0x695/0x85b
[   14.767089]  [<c100aa00>] ? hw_breakpoint_exceptions_notify+0x14e/0x16e
[   14.767698]  [<c1126372>] do_filp_open+0x34/0x9c
[   14.768094]  [<c105fd51>] ? do_raw_spin_unlock+0xa2/0xcb
[   14.768538]  [<c17baf18>] ? _raw_spin_unlock+0x22/0x2b
[   14.768972]  [<c113147b>] ? __alloc_fd+0x11b/0x126
[   14.769427]  [<c1117f7f>] do_sys_open+0x5f/0xd4
[   14.769828]  [<c1040564>] ? sigprocmask+0x7d/0x8d
[   14.770246]  [<c1118011>] SyS_open+0x1d/0x1f
[   14.770603]  [<c100152e>] do_fast_syscall_32+0xb4/0xf3
[   14.771037]  [<c17bb663>] sysenter_past_esp+0x40/0x6a
[   16.743914] /lkp/lkp/src/lib/job-init.sh: line 153:   525 Terminated              tail -n 0 -f $* > $file
[   16.750435] /lkp/lkp/src/lib/job-init.sh: line 153:   526 Terminated              tail -n 0 -f $* > $file
[   17.775168] wait for background monitors: 547 549 oom-killer nfs-hang
[   19.830211] root        2  0.0  0.0      0     0 ?        S    03:01   0:00 [kthreadd]
[   19.832653] root        3  0.2  0.0      0     0 ?        S    03:01   0:00  \_ [ksoftirqd/0]
[   19.834929] root        4  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [kworker/0:0]
[   19.843203] root        5  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [kworker/0:0H]
[   19.847280] root        6  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [kworker/u2:0]
[   19.849692] root        7  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [lru-add-drain]
[   19.854079] root        8  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [watchdog/0]
[   19.858335] root        9  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [kdevtmpfs]
[   19.861962] root       10  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [oom_reaper]
[   19.864872] root       11  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [writeback]
[   19.866994] root       12  0.0  0.0      0     0 ?        SN   03:01   0:00  \_ [ksmd]
[   19.872600] root       13  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [crypto]
[   19.874866] root       14  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [kintegrityd]
[   19.880261] root       15  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.885298] root       16  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [kblockd]
[   19.889419] root       17  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [md]
[   19.892047] root       18  2.9  0.0      0     0 ?        S    03:01   0:00  \_ [kworker/0:1]
[   19.898539] root       32  0.1  0.0      0     0 ?        S    03:01   0:00  \_ [torture_shuffle]
[   19.901001] root       33  0.1  0.0      0     0 ?        S    03:01   0:00  \_ [torture_stutter]
[   19.904420] root       34  0.0  0.0      0     0 ?        SN   03:01   0:00  \_ [lock_torture_wr]
[   19.910600] root       35  0.0  0.0      0     0 ?        SN   03:01   0:00  \_ [lock_torture_wr]
[   19.913980] root       36  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [lock_torture_st]
[   19.918843] root       37  9.2  0.0      0     0 ?        SN   03:01   0:01  \_ [rb_consumer]
[   19.923511] root       38  9.1  0.0      0     0 ?        SN   03:01   0:01  \_ [rb_producer]
[   19.926015] root       39  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [kswapd0]
[   19.933946] root       40  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [user_dlm]
[   19.937119] root       41  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [glock_workqueue]
[   19.940823] root       42  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [delete_workqueu]
[   19.944443] root       43  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [gfs_recovery]
[   19.947706] Cannot find wget/curl.
[   19.949870] root      101  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [kworker/0:2]
[   19.954094] root      102  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.956142] root      103  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.958159] root      104  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.964728] root      105  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.966789] root      106  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.969790] root      107  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.975559] root      108  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.977635] root      109  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.981026] root      110  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [rbd]
[   19.983035] root      111  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.986420] root      112  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bioset]
[   19.989025] Cannot find wget/curl.
[   19.990675] root      113  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [iscsi_eh]
[   19.994914] root      114  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [kmpath_rdacd]
[   19.999420] root      115  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [kaluad]
[   20.001550] root      116  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [kaluad_sync]
[   20.005546] root      117  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [snic_event_wq]
[   20.008779] root      118  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [bnx2i_thread/0]
[   20.010916] root      119  0.0  0.0      0     0 ?        S    03:01   0:00  \_ [scsi_eh_0]
[   20.017701] root      120  0.0  0.0      0     0 ?        S<   03:01   0:00  \_ [scsi_tmf_0]
[   20.020426] sysrq: SysRq : Emergency Sync
[   20.020889] Emergency Sync complete
[   20.021419] sysrq: SysRq : Resetting

Elapsed time: 30

initrds=(
	/osimage/quantal/quantal-core-i386.cgz
	/lkp/scheduled/vm-vp-quantal-i386-37/boot-1-quantal-core-i386.cgz-00da7dafbfd7d57e72ea4ca098570424e27d0949-20161013-88281-1ammmb3-1.cgz
	/lkp/lkp/lkp-i386.cgz
	/pkg/linux/i386-randconfig-s0-201641/gcc-6/00da7dafbfd7d57e72ea4ca098570424e27d0949/modules.cgz
)

cat "${initrds[@]}" > /fs/sdg1/initrd-vm-vp-quantal-i386-37

kvm=(
	qemu-system-i386
	-enable-kvm
	-cpu Haswell,+smep,+smap
	-kernel /pkg/linux/i386-randconfig-s0-201641/gcc-6/00da7dafbfd7d57e72ea4ca098570424e27d0949/vmlinuz-4.8.0-00006-g00da7da
	-initrd /fs/sdg1/initrd-vm-vp-quantal-i386-37
	-m 360
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-pidfile /dev/shm/kboot/pid-vm-vp-quantal-i386-37
	-serial file:/dev/shm/kboot/vm-vp-quantal-i386-37/serial
	-serial file:/dev/shm/kboot/vm-vp-quantal-i386-37/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-vp-quantal-i386-37::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-vp-quantal-i386-37/boot-1-quantal-core-i386.cgz-00da7dafbfd7d57e72ea4ca098570424e27d0949-20161013-88281-1ammmb3-1.yaml
	ARCH=i386
	kconfig=i386-randconfig-s0-201641
	branch=linux-devel/devel-spot-201610090337
	commit=00da7dafbfd7d57e72ea4ca098570424e27d0949
	BOOT_IMAGE=/pkg/linux/i386-randconfig-s0-201641/gcc-6/00da7dafbfd7d57e72ea4ca098570424e27d0949/vmlinuz-4.8.0-00006-g00da7da
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-vp-quantal-i386/quantal-core-i386.cgz/i386-randconfig-s0-201641/gcc-6/00da7dafbfd7d57e72ea4ca098570424e27d0949/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
