early console in setup code
Probing EDD (edd=off to disable)... ok
[    0.000000] Linux version 4.9.0-rc1-00038-g1157ae4 (kbuild@roam) (gcc version 4.9.4 (Debian 4.9.4-2) ) #1 SMP Wed Nov 16 00:04:12 CST 2016
[    0.000000] KERNEL supported cpus:
[    0.000000]   AMD AuthenticAMD
[    0.000000]   NSC Geode by NSC
[    0.000000]   Cyrix CyrixInstead
[    0.000000]   Transmeta GenuineTMx86
[    0.000000]   Transmeta TransmetaCPU
[    0.000000]   UMC UMC UMC UMC
[    0.000000] CPU: vendor_id 'GenuineIntel' unknown, using generic init.
[    0.000000] CPU: Your system may be unstable.
[    0.000000] x86/fpu: Legacy x87 FPU detected.
[    0.000000] x86/fpu: Using 'eager' FPU context switches.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000167dffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000167e0000-0x00000000167fffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x167e0 max_arch_pfn = 0x1000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6640-0x000f664f] mapped at [800f6640]
[    0.000000]   mpc: f6650-f6720
[    0.000000] initial memory mapped: [mem 0x00000000-0x099fffff]
[    0.000000] Base memory trampoline at [8009b000] 9b000 size 16384
[    0.000000] BRK [0x09162000, 0x09162fff] PGTABLE
[    0.000000] BRK [0x09163000, 0x09164fff] PGTABLE
[    0.000000] BRK [0x09165000, 0x09165fff] PGTABLE
[    0.000000] BRK [0x09166000, 0x09166fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x14758000-0x167dffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6470 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000167E1737 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000167E1613 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000167E0040 0015D3 (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000167E0000 000040
[    0.000000] ACPI: APIC 0x00000000167E1687 000078 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000167E16FF 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 359MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 167e0000
[    0.000000]   low ram: 0 - 167e0000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:14757001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 76400960515 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000167dffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x00000000167dffff]
[    0.000000] On node 0 totalpages: 92030
[    0.000000] free_area_init_node: node 0, pgdat 886a6fc0, node_mem_map 9442d024
[    0.000000]   Normal zone: 810 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 92030 pages, LIFO batch:31
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 1 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] e820: [mem 0x16800000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:1 nr_node_ids:1
[    0.000000] percpu: Embedded 20 pages/cpu @94411000 s49792 r0 d32128 u81920
[    0.000000] pcpu-alloc: s49792 r0 d32128 u81920 alloc=20*4096
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 144144c0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 91220
[    0.000000] Kernel command line: ip=::::vm-lkp-wsx03-quantal-i386-6::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-quantal-i386-6/boot-1-quantal-core-i386.cgz-1157ae41a38d92d38c954835f5688046e2af6da9-20161116-68034-1b01efu-0.yaml ARCH=i386 kconfig=i386-randconfig-c0-11141222 branch=linux-devel/devel-hourly-2016111409 commit=1157ae41a38d92d38c954835f5688046e2af6da9 BOOT_IMAGE=/pkg/linux/i386-randconfig-c0-11141222/gcc-4.9/1157ae41a38d92d38c954835f5688046e2af6da9/vmlinuz-4.9.0-rc1-00038-g1157ae4 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-quantal-i386/quantal-core-i386.cgz/i386-randconfig-c0-11141222/gcc-4.9/1157ae41a38d92d38c954835f5688046e2af6da9/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal 
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 309072K/368120K available (6573K kernel code, 2320K rwdata, 3920K rodata, 752K init, 7980K bss, 59048K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd36000 - 0xfffff000   (2852 kB)
[    0.000000]     pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
[    0.000000]     vmalloc : 0x96fe0000 - 0xff9fe000   (1674 MB)
[    0.000000]     lowmem  : 0x80000000 - 0x967e0000   ( 359 MB)
[    0.000000]       .init : 0x88888000 - 0x88944000   ( 752 kB)
[    0.000000]       .data : 0x8826b94f - 0x88886160   (6250 kB)
[    0.000000]       .text : 0x87c00000 - 0x8826b94f   (6574 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] Hierarchical RCU implementation.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=32, nr_cpu_ids=1
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.000000] NR_IRQS:2304 nr_irqs:256 16
[    0.000000] CPU 0 irqstacks, hard=93c2c000 soft=93c2e000
[    0.000000] console [ttyS0] enabled
[    0.000000] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
[    0.000000] ... MAX_LOCKDEP_SUBCLASSES:  8
[    0.000000] ... MAX_LOCK_DEPTH:          48
[    0.000000] ... MAX_LOCKDEP_KEYS:        8191
[    0.000000] ... CLASSHASH_SIZE:          4096
[    0.000000] ... MAX_LOCKDEP_ENTRIES:     32768
[    0.000000] ... MAX_LOCKDEP_CHAINS:      65536
[    0.000000] ... CHAINHASH_SIZE:          32768
[    0.000000]  memory used by lock dependency info: 4895 kB
[    0.000000]  per task-struct memory footprint: 1344 bytes
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Detected 2260.998 MHz processor
[    1.490189] Calibrating delay loop (skipped) preset value.. 4523.41 BogoMIPS (lpj=7536660)
[    1.502243] pid_max: default: 32768 minimum: 301
[    1.509049] ACPI: Core revision 20160831
[    1.661773] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    1.671336] 
[    1.674606] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.684012] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    1.698915] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    1.706470] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    1.804237] Freeing SMP alternatives memory: 20K (88944000 - 88949000)
[    1.846624] smpboot: APIC(0) Converting physical 0 to logical package 0
[    1.856216] smpboot: Max logical packages: 1
[    1.862502] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    1.871216] enabled ExtINT on CPU#0
[    1.887934] ENABLING IO-APIC IRQs
[    1.892866] init IO_APIC IRQs
[    1.897436]  apic 0 pin 0 not connected
[    1.903168] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1)
[    1.914416] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1)
[    1.925983] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1)
[    1.937679] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1)
[    1.949282] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1)
[    1.960916] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1)
[    1.972295] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1)
[    1.983894] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1)
[    1.995304] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1)
[    2.006900] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1)
[    2.018758] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1)
[    2.030621] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1)
[    2.042291] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1)
[    2.054182] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1)
[    2.065943] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1)
[    2.077836]  apic 0 pin 16 not connected
[    2.083383]  apic 0 pin 17 not connected
[    2.089210]  apic 0 pin 18 not connected
[    2.094977]  apic 0 pin 19 not connected
[    2.100816]  apic 0 pin 20 not connected
[    2.106454]  apic 0 pin 21 not connected
[    2.112348]  apic 0 pin 22 not connected
[    2.118179]  apic 0 pin 23 not connected
[    2.124277] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    2.132699] Using local APIC timer interrupts.
[    2.132699] calibrating APIC timer ...
[    2.250747] ... lapic delta = 6249585
[    2.255799] ... PM-Timer delta = 357832
[    2.261284] ... PM-Timer result ok
[    2.265948] ..... delta 6249585
[    2.270609] ..... mult: 268417658
[    2.275180] ..... calibration result: 3333112
[    2.281403] ..... CPU clock speed is 2260.1455 MHz.
[    2.288181] ..... host bus clock speed is 1000.0112 MHz.
[    2.296175] smpboot: CPU0: GenuineIntel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3)
[    2.310445] Performance Events: no PMU driver, software events only.
[    2.326517] x86: Booted up 1 node, 1 CPUs
[    2.332116] smpboot: Total of 1 processors activated (4523.41 BogoMIPS)
[    2.346243] devtmpfs: initialized
[    2.370815] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    2.384322] prandom: seed boundary self test passed
[    2.400943] prandom: 100 self tests passed
[    2.406683] atomic64_test: passed for i586+ platform with CX8 and with SSE
[    2.419328] NET: Registered protocol family 16
[    2.441394] cpuidle: using governor ladder
[    2.446933] cpuidle: using governor menu
[    2.457954] ACPI: bus type PCI registered
[    2.468420] PCI: PCI BIOS revision 2.10 entry at 0xfd40f, last bus=0
[    2.476779] PCI: Using configuration type 1 for base access
[    2.560025] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.572668] ACPI: Added _OSI(Module Device)
[    2.578342] ACPI: Added _OSI(Processor Device)
[    2.584340] ACPI: Added _OSI(3.0 _SCP Extensions)
[    2.590784] ACPI: Added _OSI(Processor Aggregator Device)
[    2.665031] ACPI: Interpreter enabled
[    2.670692] ACPI: (supports S0 S3 S5)
[    2.675619] ACPI: Using IOAPIC for interrupt routing
[    2.683494] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    2.883835] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    2.892091] acpi PNP0A03:00: _OSC: OS supports [Segments]
[    2.899457] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    2.908363] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    2.926580] PCI host bridge to bus 0000:00
[    2.932182] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    2.941251] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    2.950493] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    2.960469] pci_bus 0000:00: root bus resource [mem 0x16800000-0xfebfffff window]
[    2.970318] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.978324] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    2.995919] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    3.014401] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    3.068356] pci 0000:00:01.1: reg 0x20: [io  0xc040-0xc04f]
[    3.092072] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    3.102186] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    3.110904] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    3.120423] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    3.135623] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    3.149240] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    3.159639] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    3.177590] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    3.209153] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    3.256694] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    3.342181] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    3.364872] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    3.388720] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    3.413668] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    3.493190] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    3.510699] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000
[    3.527291] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f]
[    3.590021] pci_bus 0000:00: on NUMA node 0
[    3.619064] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    3.637205] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    3.655162] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    3.673536] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    3.682409] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    3.698907] ACPI: Enabled 16 GPEs in block 00 to 0F
[    3.719778] vgaarb: setting as boot device: PCI:0000:00:02.0
[    3.727883] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    3.739484] vgaarb: loaded
[    3.743629] vgaarb: bridge control possible 0000:00:02.0
[    3.754485] ACPI: bus type USB registered
[    3.759636] usbcore: registered new interface driver usbfs
[    3.766640] usbcore: registered new interface driver hub
[    3.772985] usbcore: registered new device driver usb
[    3.779019] pps_core: LinuxPPS API ver. 1 registered
[    3.783711] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.793535] PTP clock support registered
[    3.800339] FPGA manager framework
[    3.805785] PCI: Using ACPI for IRQ routing
[    3.811905] PCI: pci_cache_line_size set to 32 bytes
[    3.820493] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    3.828850] e820: reserve RAM buffer [mem 0x167e0000-0x17ffffff]
[    3.839905] NET: Registered protocol family 23
[    3.850960] clocksource: Switched to clocksource kvm-clock
[    3.872769] Warning: could not register all branches stats
[    3.880901] Warning: could not register annotated branches stats
[    4.136806] VFS: Disk quotas dquot_6.6.0
[    4.142771] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    4.153465] FS-Cache: Loaded
[    4.159138] pnp: PnP ACPI init
[    4.166782] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.178738] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    4.190415] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    4.200035] pnp 00:03: [dma 2]
[    4.209176] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    4.220705] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    4.234031] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.245757] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.265788] pnp: PnP ACPI: found 7 devices
[    4.329949] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.342972] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    4.351626] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    4.360025] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    4.369491] pci_bus 0000:00: resource 7 [mem 0x16800000-0xfebfffff window]
[    4.380407] NET: Registered protocol family 1
[    4.386796] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    4.395117] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    4.403414] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    4.412331] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    4.424152] PCI: CLS 0 bytes, default 32
[    4.432359] Unpacking initramfs...
[   29.878196] Freeing initrd memory: 33312K (94758000 - 967e0000)
[   29.908691] has_svm: not amd
[   29.913221] kvm: no hardware support
[   29.922402] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   29.931794] apm: overridden by ACPI.
[   29.947377] The force parameter has not been set to 1. The Iris poweroff handler will not be installed.
[   29.981703] futex hash table entries: 256 (order: 2, 16384 bytes)
[   29.991168] audit: initializing netlink subsys (disabled)
[   30.007335] audit: type=2000 audit(1479225993.072:1): initialized
[   30.023083] Kprobe smoke test: started
[   30.213992] Kprobe smoke test: passed successfully
[   30.254851] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[   30.276107] cryptomgr_test (24) used greatest stack depth: 7268 bytes left
[   30.326075] start plist test
[   30.446955] end plist test
[   30.475790] test_hexdump: all 1184 tests passed
[   30.484286] test_firmware: interface ready
[   30.495179] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64
[   30.502792] crc32: self tests passed, processed 225944 bytes in 1879166 nsec
[   30.514977] crc32c: CRC_LE_BITS = 64
[   30.520128] crc32c: self tests passed, processed 225944 bytes in 967490 nsec
[   30.810320] crc32_combine: 8373 self tests passed
[   31.120799] crc32c_combine: 8373 self tests passed
[   31.128090] rbtree testing
[   42.050609]  -> 246867 cycles
[   43.360325] augmented rbtree testing
[   61.465398]  -> 409234 cycles
[   63.630680] gpio-mockup: probe of gpio-mockup failed with error -22
[   63.697796] ipmi message handler version 39.2
[   63.705115] ipmi device interface
[   63.710825] IPMI SSIF Interface driver
[   63.719858] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   63.730719] ACPI: Power Button [PWRF]
[   63.737388] Warning: Processor Platform Limit event detected, but not handled.
[   63.747606] Consider compiling CPUfreq support into your kernel.
[   63.761345] xenfs: not registering filesystem on non-xen platform
[   67.800177] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[   67.888031] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   67.989245] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   68.062476] platform pc8736x_gpio.0: NatSemi pc8736x GPIO Driver Initializing
[   68.082282] platform pc8736x_gpio.0: no device found
[   68.090642] nsc_gpio initializing
[   68.095182] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   68.114626] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti
[   68.125482] usbcore: registered new interface driver rtsx_usb
[   68.142854] usbcore: registered new interface driver dln2
[   68.157986] usbcore: registered new interface driver stir4200
[   68.174149] usbcore: registered new interface driver kingsun-sir
[   68.188471] usbcore: registered new interface driver ksdazzle-sir
[   68.205517] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   68.214141] ehci-pci: EHCI PCI platform driver
[   68.226848] usbcore: registered new interface driver cdc_wdm
[   68.234844] usbcore: registered new interface driver mdc800
[   68.242238] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera
[   68.258636] usbcore: registered new interface driver adutux
[   68.266085] ftdi_elan: driver ftdi-elan
[   68.271796] usbcore: registered new interface driver ftdi-elan
[   68.281452] usbcore: registered new interface driver isight_firmware
[   68.290332] usbcore: registered new interface driver usbtest
[   68.298175] usbcore: registered new interface driver usbsevseg
[   68.306272] usbcore: registered new interface driver lvs
[   68.313366] usbip_core: USB/IP Core v1.0.0
[   68.326265] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[   68.348826] serio: i8042 KBD port at 0x60,0x64 irq 1
[   68.355659] serio: i8042 AUX port at 0x60,0x64 irq 12
[   68.381392] usbcore: registered new interface driver appletouch
[   68.400636] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   68.415389] usbcore: registered new interface driver synaptics_usb
[   68.439394] usbcore: registered new interface driver gtco
[   68.455822] usbcore: registered new interface driver i2c-tiny-usb
[   68.471093] Driver for 1-wire Dallas network protocol.
[   68.498244] ledtrig-cpu: registered to indicate activity on CPUs
[   68.532849] hidraw: raw HID events driver (C) Jiri Kosina
[   68.577088] usbcore: registered new interface driver usbkbd
[   68.592384] hdaps: supported laptop not found!
[   68.598380] hdaps: driver init failed (ret=-19)!
[   68.626185] NET: Registered protocol family 15
[   68.632671] NET: Registered protocol family 35
[   68.638919] mpls_gso: MPLS GSO support
[   68.644070] mce: Unable to init device /dev/mcelog (rc: -5)
[   68.662442] ... APIC ID:      00000000 (0)
[   68.677941] ... APIC VERSION: 01050014
[   68.682958] 0000000000000000000000000000000000000000000000000000000000000000
[   68.711090] 0000000000000000000000000000000000000000000000000000000000000000
[   68.732090] 0000000000000000000000000000000000000000000000000000000000008000

[   68.753961] number of MP IRQ sources: 15.
[   68.771172] number of IO-APIC #0 registers: 24.
[   68.777389] testing the IO APIC.......................
[   68.784750] IO APIC #0......
[   68.788767] .... register #00: 00000000
[   68.794501] .......    : physical APIC id: 00
[   68.800501] .......    : Delivery Type: 0
[   68.806071] .......    : LTS          : 0
[   68.811487] .... register #01: 00170011
[   68.816827] .......     : max redirection entries: 17
[   68.823574] .......     : PRQ implemented: 0
[   68.829371] .......     : IO APIC version: 11
[   68.839218] .... register #02: 00000000
[   68.844505] .......     : arbitration: 00
[   68.850043] .... IRQ redirection table:
[   68.855235] IOAPIC 0:
[   68.858726]  pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   68.869232]  pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(01), M(1)
[   68.879797]  pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(01), M(1)
[   68.890266]  pin03, disabled, edge , high, V(33), IRR(0), S(0), logical , D(01), M(1)
[   68.900766]  pin04, disabled, edge , high, V(34), IRR(0), S(0), logical , D(01), M(1)
[   68.911358]  pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(01), M(1)
[   68.921952]  pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(01), M(1)
[   68.932391]  pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(01), M(1)
[   68.942887]  pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(01), M(1)
[   68.953357]  pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(01), M(1)
[   68.963827]  pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(01), M(1)
[   68.974424]  pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(01), M(1)
[   68.984924]  pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(01), M(1)
[   68.995609]  pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(01), M(1)
[   69.006043]  pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(01), M(1)
[   69.017914]  pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(01), M(1)
[   69.028343]  pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   69.038846]  pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   69.049305]  pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   69.059837]  pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   69.070306]  pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   69.080778]  pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   69.091247]  pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   69.101777]  pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0)
[   69.112076] IRQ to pin mappings:
[   69.116490] IRQ0 -> 0:2
[   69.120405] IRQ1 -> 0:1
[   69.124233] IRQ3 -> 0:3
[   69.128281] IRQ4 -> 0:4
[   69.132108] IRQ5 -> 0:5
[   69.135959] IRQ6 -> 0:6
[   69.139822] IRQ7 -> 0:7
[   69.143649] IRQ8 -> 0:8
[   69.147529] IRQ9 -> 0:9
[   69.151520] IRQ10 -> 0:10
[   69.155598] IRQ11 -> 0:11
[   69.159719] IRQ12 -> 0:12
[   69.163798] IRQ13 -> 0:13
[   69.168079] IRQ14 -> 0:14
[   69.172131] IRQ15 -> 0:15
[   69.176148] .................................... done.
[   69.184447] Using IPI No-Shortcut mode
[   69.252270] registered taskstats version 1
[   69.307782] OF: Duplicate name in testcase-data, renamed to "duplicate-name#1"
[   69.498869] ### dt-test ### start of unittest - you will see error messages
[   69.518251] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[   69.537304] OF: /testcase-data/phandle-tests/consumer-a: could not get #phandle-cells-missing for /testcase-data/phandle-tests/provider1
[   69.553800] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[   69.563879] OF: /testcase-data/phandle-tests/consumer-a: could not find phandle
[   69.576676] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[   69.588739] OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property
[   69.605681] irq: no irq domain found for /testcase-data/interrupts/intc0 !
[   69.741858] OF: overlay: overlay_is_topmost: #5 clashes #6 @/testcase-data/overlay-node/test-bus/test-unittest8
[   69.757965] OF: overlay: overlay #5 is not topmost
[   69.879090] i2c i2c-0: Added multiplexed i2c bus 1
[   69.935486] i2c i2c-0: Added multiplexed i2c bus 2
[   69.975278] ### dt-test ### end of unittest - 149 passed, 0 failed
[   70.001715] Freeing unused kernel memory: 752K (88888000 - 88944000)
[   70.012733] Write protecting the kernel text: 6576k
[   70.021808] Write protecting the kernel read-only data: 3928k
[   70.030077] ------------[ cut here ]------------
[   70.057976] WARNING: CPU: 0 PID: 1 at include/linux/mm.h:983 workingset_activation+0x84/0x148
[   70.071977] Modules linked in:
[   70.076703] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.9.0-rc1-00038-g1157ae4 #1
[   70.087859] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   70.102726]  93c5dce4 87f1cabe 00000000 885809c9 000003d7 93c5dcfc 87cc0206 87e0133f
[   70.114880]  00000001 94640b40 00000001 93c5dd10 87cc0298 00000009 00000000 00000000
[   70.127708]  93c5dd24 87e0133f 94640b40 00000000 94640ac4 93c5dd38 87de4fbf 00000000
[   70.141748] Call Trace:
[   70.145240]  [<87f1cabe>] dump_stack+0xc4/0x12c
[   70.151437]  [<87cc0206>] __warn+0x110/0x127
[   70.157362]  [<87e0133f>] ? workingset_activation+0x84/0x148
[   70.166505]  [<87cc0298>] warn_slowpath_null+0x16/0x1b
[   70.175189]  [<87e0133f>] workingset_activation+0x84/0x148
[   70.183811]  [<87de4fbf>] mark_page_accessed+0x242/0x2bc
[   70.191065]  [<87dca4d1>] do_read_cache_page+0x83b/0x84c
[   70.198322]  [<87e90205>] ? simple_setattr+0x77/0x77
[   70.206362]  [<87e82a06>] ? touch_atime+0xbc/0xc3
[   70.214403]  [<87e68906>] ? page_put_link+0xe7/0xe7
[   70.221169]  [<87dca4f8>] read_cache_page+0x16/0x18
[   70.227848]  [<87e68ac9>] page_get_link+0x1c3/0x265
[   70.235751]  [<87e68906>] ? page_put_link+0xe7/0xe7
[   70.242397]  [<87e6c360>] trailing_symlink+0x2bf/0x3d2
[   70.249401]  [<87e7166f>] path_openat+0x1d32/0x1f9d
[   70.257235]  [<87cad3b1>] ? update_stack_state+0x32/0x72
[   70.265795]  [<87cad42d>] ? unwind_next_frame+0x3c/0x56
[   70.272929]  [<87c8e6ec>] ? __save_stack_trace+0x11d/0x127
[   70.280412]  [<87e71923>] do_filp_open+0x49/0xe6
[   70.288193]  [<87e638be>] do_open_execat+0xb7/0x232
[   70.296645]  [<87e640b9>] do_execveat_common+0x28b/0xa4e
[   70.304292]  [<87e64895>] do_execve+0x19/0x1b
[   70.310348]  [<87c02021>] run_init_process+0x21/0x23
[   70.318588]  [<8825e0f7>] kernel_init+0x75/0x162
[   70.325288]  [<8825e082>] ? rest_init+0xaa/0xaa
[   70.331614]  [<8826972b>] ret_from_fork+0x1b/0x30
[   70.340394] ---[ end trace 8e502acf29f2a82a ]---
[   70.354103] ------------[ cut here ]------------
[   70.360613] kernel BUG at include/linux/memcontrol.h:500!
[   70.372900] invalid opcode: 0000 [#1] SMP
[   70.378373] Modules linked in:
[   70.383658] CPU: 0 PID: 1 Comm: init Tainted: G        W       4.9.0-rc1-00038-g1157ae4 #1
[   70.394897] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Debian-1.8.2-1 04/01/2014
[   70.406796] task: 93c4f000 task.stack: 93c5c000
[   70.414770] EIP: 0060:[<87e1e391>] EFLAGS: 00010202 CPU: 0
[   70.422222] EIP is at page_remove_rmap+0x2d1/0x60b
[   70.428697] EAX: 00000001 EBX: 00000001 ECX: 00000000 EDX: 00000001
[   70.437127] ESI: 94641cf8 EDI: 94641ce8 EBP: 93c5de28 ESP: 93c5de14
[   70.447174]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[   70.456053] CR0: 80050033 CR2: 55583bb0 CR3: 0c6d1280 CR4: 000006b0
[   70.465962] Stack:
[   70.493774]  00000001 94641c01 00000000 00000000 00000001 93c5de78 87e05956 55584000
[   70.517400]  00000000 55583000 55584000 0893f067 55583000 0ecce001 00000001 00000000
[   70.532117]  8c6c1e90 8c6d34e0 93c5df10 0893f067 00000000 93c46210 00000000 0ecce025
[   70.546013] Call Trace:
[   70.549801]  [<87e05956>] wp_page_copy+0x68e/0xbdd
[   70.558915]  [<87e08701>] do_wp_page+0x110c/0x113a
[   70.566076]  [<87e0faf6>] handle_mm_fault+0x2022/0x21c3
[   70.574046]  [<87caf4f1>] __do_page_fault+0x4e4/0xa13
[   70.581662]  [<87cafbf0>] trace_do_page_fault+0x1b2/0x1ba
[   70.590507]  [<87cab625>] ? kvm_async_pf_task_wake+0x139/0x139
[   70.598803]  [<87cab64d>] do_async_page_fault+0x28/0x50
[   70.605905]  [<8826a82c>] error_code+0x6c/0x80
[   70.612768] Code: 47 ff 8b 18 83 e3 01 83 f3 01 31 c9 89 da b8 8c 47 6c 88 e8 d9 73 f7 ff 8b 04 9d 80 46 76 88 40 85 db 89 04 9d 80 46 76 88 74 02 <0f> 0b 8b 56 20 85 d2 0f 95 c1 0f b6 d9 8b 04 9d 6c 46 76 88 40
[   70.657260] EIP: [<87e1e391>] 
[   70.661440] page_remove_rmap+0x2d1/0x60b
[   70.668829]  SS:ESP 0068:93c5de14
[   70.674632] ---[ end trace 8e502acf29f2a82b ]---
[   70.682083] Kernel panic - not syncing: Fatal exception
[   70.690809] Kernel Offset: 0x6c00000 from 0x81000000 (relocation range: 0x80000000-0x96fdffff)

Elapsed time: 150

initrds=(
	/osimage/quantal/quantal-core-i386.cgz
	/lkp/scheduled/vm-lkp-wsx03-quantal-i386-6/boot-1-quantal-core-i386.cgz-1157ae41a38d92d38c954835f5688046e2af6da9-20161116-68034-1b01efu-0.cgz
	/lkp/lkp/lkp-i386.cgz
	/pkg/linux/i386-randconfig-c0-11141222/gcc-4.9/1157ae41a38d92d38c954835f5688046e2af6da9/modules.cgz
)

cat "${initrds[@]}" > /fs/sdc1/initrd-vm-lkp-wsx03-quantal-i386-6

kvm=(
	qemu-system-i386
	-enable-kvm
	-kernel /pkg/linux/i386-randconfig-c0-11141222/gcc-4.9/1157ae41a38d92d38c954835f5688046e2af6da9/vmlinuz-4.9.0-rc1-00038-g1157ae4
	-initrd /fs/sdc1/initrd-vm-lkp-wsx03-quantal-i386-6
	-m 360
	-smp 1
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-pidfile /dev/shm/kboot/pid-vm-lkp-wsx03-quantal-i386-6
	-serial file:/dev/shm/kboot/vm-lkp-wsx03-quantal-i386-6/serial
	-serial file:/dev/shm/kboot/vm-lkp-wsx03-quantal-i386-6/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-wsx03-quantal-i386-6::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-wsx03-quantal-i386-6/boot-1-quantal-core-i386.cgz-1157ae41a38d92d38c954835f5688046e2af6da9-20161116-68034-1b01efu-0.yaml
	ARCH=i386
	kconfig=i386-randconfig-c0-11141222
	branch=linux-devel/devel-hourly-2016111409
	commit=1157ae41a38d92d38c954835f5688046e2af6da9
	BOOT_IMAGE=/pkg/linux/i386-randconfig-c0-11141222/gcc-4.9/1157ae41a38d92d38c954835f5688046e2af6da9/vmlinuz-4.9.0-rc1-00038-g1157ae4
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-quantal-i386/quantal-core-i386.cgz/i386-randconfig-c0-11141222/gcc-4.9/1157ae41a38d92d38c954835f5688046e2af6da9/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
