early console in setup code
early console in extract_kernel
input_data: 0x0000000001daa3b4
input_len: 0x000000000077252c
output: 0x0000000001000000
output_len: 0x000000000150a8c8
kernel_total_size: 0x00000000011f6000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] Linux version 4.11.0-12455-g66de5f1 (kbuild@lkp-ne02) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #1 SMP Thu May 18 12:03:12 CST 2017
[    0.000000] Command line: ip=::::vm-lkp-wsx03-8G-8::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-8G-8/boot-1-debian-x86_64-2016-08-31.cgz-66de5f1b197e175840a132f7ee8927bfc3ff92b3-20170518-26241-7cx5m4-0.yaml ARCH=x86_64 kconfig=x86_64-kexec branch=linux-devel/devel-hourly-2017051802 commit=66de5f1b197e175840a132f7ee8927bfc3ff92b3 BOOT_IMAGE=/pkg/linux/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/vmlinuz-4.11.0-12455-g66de5f1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-8G/debian-x86_64-2016-08-31.cgz/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffddfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffde000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask FFC0000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: last_pfn = 0xbffde max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b80-0x000f6b8f] mapped at [ffff8800000f6b80]
[    0.000000]   mpc: f6b90-f6c7c
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x021d1000, 0x021d1fff] PGTABLE
[    0.000000] BRK [0x021d2000, 0x021d2fff] PGTABLE
[    0.000000] BRK [0x021d3000, 0x021d3fff] PGTABLE
[    0.000000] BRK [0x021d4000, 0x021d4fff] PGTABLE
[    0.000000] BRK [0x021d5000, 0x021d5fff] PGTABLE
[    0.000000] BRK [0x021d6000, 0x021d6fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x75bf5000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6940 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000BFFE1936 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000BFFE180A 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000BFFE0040 0017CA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000BFFE0000 000040
[    0.000000] ACPI: APIC 0x00000000BFFE187E 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000BFFE18FE 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fff6000-0x23fffafff]
[    0.000000] cma: Reserved 200 MiB at 0x0000000233400000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 2:3ffee001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 4340339876 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffddfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.000000] On node 0 totalpages: 2097020
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12224 pages used for memmap
[    0.000000]   DMA32 zone: 782302 pages, LIFO batch:31
[    0.000000]   Normal zone: 20480 pages used for memmap
[    0.000000]   Normal zone: 1310720 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffde000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff88023fc00000 s109976 r8192 d29288 u1048576
[    0.000000] pcpu-alloc: s109976 r8192 d29288 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 23fc0ca40
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2064231
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: ip=::::vm-lkp-wsx03-8G-8::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-8G-8/boot-1-debian-x86_64-2016-08-31.cgz-66de5f1b197e175840a132f7ee8927bfc3ff92b3-20170518-26241-7cx5m4-0.yaml ARCH=x86_64 kconfig=x86_64-kexec branch=linux-devel/devel-hourly-2017051802 commit=66de5f1b197e175840a132f7ee8927bfc3ff92b3 BOOT_IMAGE=/pkg/linux/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/vmlinuz-4.11.0-12455-g66de5f1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-8G/debian-x86_64-2016-08-31.cgz/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 7799504K/8388080K available (10227K kernel code, 1396K rwdata, 3612K rodata, 1556K init, 792K bss, 383776K reserved, 204800K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 44601 entries in 175 pages
[    0.004000] Hierarchical RCU implementation.
[    0.004000] 	Build-time adjustment of leaf fanout to 64.
[    0.004000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.004000] NR_IRQS:33024 nr_irqs:440 16
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] bootconsole [earlyser0] disabled
[    0.000000] Linux version 4.11.0-12455-g66de5f1 (kbuild@lkp-ne02) (gcc version 6.2.0 20160901 (Debian 6.2.0-3) ) #1 SMP Thu May 18 12:03:12 CST 2017
[    0.000000] Command line: ip=::::vm-lkp-wsx03-8G-8::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-8G-8/boot-1-debian-x86_64-2016-08-31.cgz-66de5f1b197e175840a132f7ee8927bfc3ff92b3-20170518-26241-7cx5m4-0.yaml ARCH=x86_64 kconfig=x86_64-kexec branch=linux-devel/devel-hourly-2017051802 commit=66de5f1b197e175840a132f7ee8927bfc3ff92b3 BOOT_IMAGE=/pkg/linux/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/vmlinuz-4.11.0-12455-g66de5f1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-8G/debian-x86_64-2016-08-31.cgz/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000]   AMD AuthenticAMD
[    0.000000]   Centaur CentaurHauls
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bffddfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bffde000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
[    0.000000] tsc: Fast TSC calibration failed
[    0.000000] tsc: Unable to calibrate against PIT
[    0.000000] tsc: No reference (HPET/PMTIMER) available
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.8 present.
[    0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[    0.000000] Hypervisor detected: KVM
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] AGP: No AGP bridge found
[    0.000000] e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00C0000000 mask FFC0000000 uncachable
[    0.000000]   1 disabled
[    0.000000]   2 disabled
[    0.000000]   3 disabled
[    0.000000]   4 disabled
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WC  UC- UC  
[    0.000000] e820: last_pfn = 0xbffde max_arch_pfn = 0x400000000
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b80-0x000f6b8f] mapped at [ffff8800000f6b80]
[    0.000000]   mpc: f6b90-f6c7c
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[    0.000000] BRK [0x021d1000, 0x021d1fff] PGTABLE
[    0.000000] BRK [0x021d2000, 0x021d2fff] PGTABLE
[    0.000000] BRK [0x021d3000, 0x021d3fff] PGTABLE
[    0.000000] BRK [0x021d4000, 0x021d4fff] PGTABLE
[    0.000000] BRK [0x021d5000, 0x021d5fff] PGTABLE
[    0.000000] BRK [0x021d6000, 0x021d6fff] PGTABLE
[    0.000000] RAMDISK: [mem 0x75bf5000-0x7fffffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6940 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x00000000BFFE1936 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x00000000BFFE180A 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x00000000BFFE0040 0017CA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x00000000BFFE0000 000040
[    0.000000] ACPI: APIC 0x00000000BFFE187E 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x00000000BFFE18FE 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to ffffffffff5fd000 (        fee00000)
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x23fff6000-0x23fffafff]
[    0.000000] cma: Reserved 200 MiB at 0x0000000233400000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 2:3ffee001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 4340339876 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bffddfff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x000000023fffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
[    0.000000] On node 0 totalpages: 2097020
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3998 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12224 pages used for memmap
[    0.000000]   DMA32 zone: 782302 pages, LIFO batch:31
[    0.000000]   Normal zone: 20480 pages used for memmap
[    0.000000]   Normal zone: 1310720 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000)
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
[    0.000000] PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbffde000-0xbfffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xfeffbfff]
[    0.000000] PM: Registered nosave memory: [mem 0xfeffc000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xfffbffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfffc0000-0xffffffff]
[    0.000000] e820: [mem 0xc0000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff88023fc00000 s109976 r8192 d29288 u1048576
[    0.000000] pcpu-alloc: s109976 r8192 d29288 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 23fc0ca40
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 2064231
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: ip=::::vm-lkp-wsx03-8G-8::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-lkp-wsx03-8G-8/boot-1-debian-x86_64-2016-08-31.cgz-66de5f1b197e175840a132f7ee8927bfc3ff92b3-20170518-26241-7cx5m4-0.yaml ARCH=x86_64 kconfig=x86_64-kexec branch=linux-devel/devel-hourly-2017051802 commit=66de5f1b197e175840a132f7ee8927bfc3ff92b3 BOOT_IMAGE=/pkg/linux/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/vmlinuz-4.11.0-12455-g66de5f1 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-8G/debian-x86_64-2016-08-31.cgz/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vga=normal rw
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] AGP: Checking aperture...
[    0.000000] AGP: No AGP bridge found
[    0.000000] Memory: 7799504K/8388080K available (10227K kernel code, 1396K rwdata, 3612K rodata, 1556K init, 792K bss, 383776K reserved, 204800K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 44601 entries in 175 pages
[    0.004000] Hierarchical RCU implementation.
[    0.004000] 	Build-time adjustment of leaf fanout to 64.
[    0.004000] 	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=2.
[    0.004000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=2
[    0.004000] NR_IRQS:33024 nr_irqs:440 16
[    0.004000] Console: colour VGA+ 80x25
[    0.004000] console [tty0] enabled
[    0.004000] bootconsole [earlyser0] disabled
[    0.004000] console [ttyS0] enabled
[    0.004000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns
[    0.004000] hpet clockevent registered
[    0.004065] tsc: Detected 2260.998 MHz processor
[    0.008035] Calibrating delay loop (skipped) preset value.. 4521.99 BogoMIPS (lpj=9043992)
[    0.012064] pid_max: default: 32768 minimum: 301
[    0.016162] ACPI: Core revision 20170119
[    0.037167] ACPI: 1 ACPI AML tables successfully acquired and loaded
[    0.048194] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.080100] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.095827] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.096168] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.104846] CPU: Physical Processor ID: 0
[    0.112096] mce: CPU supports 10 MCE banks
[    0.116448] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
[    0.120096] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[    0.128224] Freeing SMP alternatives memory: 40K
[    0.146168] smpboot: Max logical packages: 2
[    0.152483] x2apic enabled
[    0.156059] Switched APIC routing to physical x2apic.
[    0.160517] enabled ExtINT on CPU#0
[    0.173402] ENABLING IO-APIC IRQs
[    0.176066] init IO_APIC IRQs
[    0.180039]  apic 0 pin 0 not connected
[    0.184126] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0)
[    0.188105] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:0)
[    0.192000] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:0)
[    0.192000]  apic 0 pin 16 not connected
[    0.192000]  apic 0 pin 17 not connected
[    0.192000]  apic 0 pin 18 not connected
[    0.192000]  apic 0 pin 19 not connected
[    0.192000]  apic 0 pin 20 not connected
[    0.192000]  apic 0 pin 21 not connected
[    0.192000]  apic 0 pin 22 not connected
[    0.192000]  apic 0 pin 23 not connected
[    0.192000] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.192000] Using local APIC timer interrupts.
[    0.192000] calibrating APIC timer ...
[    0.196000] ... lapic delta = 6217029
[    0.196000] ... PM-Timer delta = 356065
[    0.196000] ... PM-Timer result ok
[    0.196000] ..... delta 6217029
[    0.196000] ..... mult: 267019362
[    0.196000] ..... calibration result: 3978898
[    0.196000] ..... CPU clock speed is 2247.3628 MHz.
[    0.196000] ..... host bus clock speed is 994.2898 MHz.
[    0.196446] smpboot: CPU0: Intel Common KVM processor (family: 0xf, model: 0x6, stepping: 0x1)
[    0.200836] Performance Events: unsupported Netburst CPU model 6 no PMU driver, software events only.
[    0.205431] smp: Bringing up secondary CPUs ...
[    0.208943] x86: Booting SMP configuration:
[    0.212039] .... node  #0, CPUs:      #1
[    0.004000] kvm-clock: cpu 1, msr 2:3ffee041, secondary cpu clock
[    0.004000] masked ExtINT on CPU#1
[    0.248167] KVM setup async PF for cpu 1
[    0.252000] kvm-stealtime: cpu 1, msr 23fd0ca40
[    0.288031] smp: Brought up 1 node, 2 CPUs
[    0.292034] smpboot: Total of 2 processors activated (9043.99 BogoMIPS)
[    0.304458] sched_clock: Marking stable (304000000, 0)->(6356986679, -6052986679)
[    0.346065] devtmpfs: initialized
[    0.358960] x86/mm: Memory block size: 128MB
[    0.431456] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.474094] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.499501] xor: measuring software checksum speed
[    0.550743]    prefetch64-sse:  1577.000 MB/sec
[    0.602462]    generic_sse:  1229.000 MB/sec
[    0.617061] xor: using function: prefetch64-sse (1577.000 MB/sec)
[    0.637062] NET: Registered protocol family 16
[    0.664963] cpuidle: using governor ladder
[    0.688388] cpuidle: using governor menu
[    0.706149] PCCT header not found.
[    0.727347] ACPI: bus type PCI registered
[    0.757253] PCI: Using configuration type 1 for base access
[    0.936767] raid6: sse2x1   gen()   517 MB/s
[    1.035760] raid6: sse2x1   xor()   407 MB/s
[    1.127792] raid6: sse2x2   gen()   650 MB/s
[    1.207288] raid6: sse2x2   xor()   439 MB/s
[    1.286876] raid6: sse2x4   gen()   619 MB/s
[    1.366433] raid6: sse2x4   xor()   450 MB/s
[    1.380927] raid6: using algorithm sse2x2 gen() 650 MB/s
[    1.396995] raid6: .... xor() 439 MB/s, rmw enabled
[    1.411997] raid6: using ssse3x2 recovery algorithm
[    1.428493] ACPI: Added _OSI(Module Device)
[    1.442167] ACPI: Added _OSI(Processor Device)
[    1.456005] ACPI: Added _OSI(3.0 _SCP Extensions)
[    1.470978] ACPI: Added _OSI(Processor Aggregator Device)
[    1.531865] ACPI: Interpreter enabled
[    1.545093] ACPI: (supports S0 S3 S4 S5)
[    1.567127] ACPI: Using IOAPIC for interrupt routing
[    1.596210] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    1.703249] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    1.722731] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
[    1.741457] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    1.758887] acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
[    1.800335] PCI host bridge to bus 0000:00
[    1.832296] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    1.850792] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    1.869267] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    1.894771] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff window]
[    1.919238] pci_bus 0000:00: root bus resource [bus 00-ff]
[    1.942023] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[    1.962893] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[    1.985345] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[    2.070864] pci 0000:00:01.1: reg 0x20: [io  0xc080-0xc08f]
[    2.116785] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
[    2.134834] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
[    2.151948] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
[    2.172912] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
[    2.193333] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[    2.216267] pci 0000:00:01.3: quirk: [io  0x0600-0x063f] claimed by PIIX4 ACPI
[    2.242000] pci 0000:00:01.3: quirk: [io  0x0700-0x070f] claimed by PIIX4 SMB
[    2.267831] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000
[    2.310737] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref]
[    2.376002] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff]
[    2.495091] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref]
[    2.514932] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000
[    2.553981] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff]
[    2.593487] pci 0000:00:03.0: reg 0x14: [io  0xc000-0xc03f]
[    2.716540] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref]
[    2.736407] pci 0000:00:04.0: [1af4:1001] type 00 class 0x010000
[    2.782905] pci 0000:00:04.0: reg 0x10: [io  0xc040-0xc07f]
[    2.836503] pci 0000:00:04.0: reg 0x14: [mem 0xfebf1000-0xfebf1fff]
[    2.965205] pci 0000:00:04.0: reg 0x20: [mem 0xfe000000-0xfe7fffff 64bit pref]
[    3.048141] pci 0000:00:05.0: [8086:25ab] type 00 class 0x088000
[    3.101996] pci 0000:00:05.0: reg 0x10: [mem 0xfebf2000-0xfebf200f]
[    3.231441] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
[    3.246938] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[    3.276895] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[    3.295337] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
[    3.313224] ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
[    3.347249] ACPI: Enabled 3 GPEs in block 00 to 0F
[    3.380913] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    3.400391] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    3.431925] pci 0000:00:02.0: vgaarb: bridge control possible
[    3.449941] vgaarb: loaded
[    3.463875] SCSI subsystem initialized
[    3.485755] libata version 3.00 loaded.
[    3.511316] ACPI: bus type USB registered
[    3.537473] usbcore: registered new interface driver usbfs
[    3.566087] usbcore: registered new interface driver hub
[    3.584724] usbcore: registered new device driver usb
[    3.602312] pps_core: LinuxPPS API ver. 1 registered
[    3.618908] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    3.666376] PTP clock support registered
[    3.710978] Advanced Linux Sound Architecture Driver Initialized.
[    3.912528] PCI: Using ACPI for IRQ routing
[    3.927718] PCI: pci_cache_line_size set to 64 bytes
[    3.946422] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
[    3.965055] e820: reserve RAM buffer [mem 0xbffde000-0xbfffffff]
[    4.008568] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[    4.060811] clocksource: Switched to clocksource kvm-clock
[    4.287626] VFS: Disk quotas dquot_6.6.0
[    4.319379] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    4.351241] pnp: PnP ACPI init
[    4.365786] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[    4.404063] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[    4.430066] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active)
[    4.448502] pnp 00:03: [dma 2]
[    4.460374] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active)
[    4.478356] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[    4.510009] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.541972] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[    4.569712] pnp: PnP ACPI: found 7 devices
[    4.642785] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    4.681318] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    4.699943] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    4.733814] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    4.766805] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff window]
[    4.785951] NET: Registered protocol family 2
[    4.810615] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    4.837933] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    4.856307] TCP: Hash tables configured (established 65536 bind 65536)
[    4.874830] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    4.892074] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    4.910412] NET: Registered protocol family 1
[    4.939300] RPC: Registered named UNIX socket transport module.
[    4.959855] RPC: Registered udp transport module.
[    4.975501] RPC: Registered tcp transport module.
[    4.991285] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.011504] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[    5.046636] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[    5.073729] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[    5.111197] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    5.144868] PCI: CLS 0 bytes, default 64
[    5.159941] Unpacking initramfs...
[   36.744489] Freeing initrd memory: 167980K
[   36.767138] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[   36.785060] software IO TLB [mem 0xbbfde000-0xbffde000] (64MB) mapped at [ffff8800bbfde000-ffff8800bffddfff]
[   36.837390] Scanning for low memory corruption every 60 seconds
[   36.877644] audit: initializing netlink subsys (disabled)
[   36.908915] audit: type=2000 audit(1495081878.250:1): state=initialized audit_enabled=0 res=1
[   36.945787] workingset: timestamp_bits=40 max_order=21 bucket_order=0
[   37.014361] NFS: Registering the id_resolver key type
[   37.035684] Key type id_resolver registered
[   37.050627] Key type id_legacy registered
[   37.064562] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[   37.101181] SGI XFS with security attributes, no debug enabled
[   37.157119] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
[   37.181780] io scheduler noop registered
[   37.195555] io scheduler deadline registered (default)
[   37.211757] io scheduler mq-deadline registered
[   37.226677] io scheduler kyber registered
[   37.259762] gpio-mockup: probe of gpio-mockup failed with error -22
[   37.279340] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   37.303991] ACPI: Power Button [PWRF]
[   37.461843] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   37.579970] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[   37.687360] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
[   37.731599] Initializing Nozomi driver 2.1d
[   37.762545] Non-volatile memory driver v1.3
[   37.777128] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[   37.845119] loop: module loaded
[   37.951159] rdac: device handler registered
[   37.976297] hp_sw: device handler registered
[   38.001616] emc: device handler registered
[   38.040461] alua: device handler registered
[   38.072713] ata_piix 0000:00:01.1: version 2.13
[   38.113736] scsi host0: ata_piix
[   38.146309] scsi host1: ata_piix
[   38.167303] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc080 irq 14
[   38.186623] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc088 irq 15
[   38.233385] tun: Universal TUN/TAP device driver, 1.6
[   38.274906] pcnet32: pcnet32.c:v1.35 21.Apr.2008 tsbogend@alpha.franken.de
[   38.314282] Atheros(R) L2 Ethernet Driver - version 2.2.3
[   38.330152] Copyright (c) 2007 Atheros Corporation.
[   38.359490] cnic: QLogic cnicDriver v2.5.22 (July 20, 2015)
[   38.381819] bnx2x: QLogic 5771x/578xx 10/20-Gigabit Ethernet Driver bnx2x 1.712.30-0 (2014/02/10)
[   38.405565] ata2.01: NODEV after polling detection
[   38.408028] ata2.00: ATAPI: QEMU DVD-ROM, 2.5+, max UDMA/100
[   38.423551] ata2.00: configured for MWDMA2
[   38.475923] BUG: unable to handle kernel NULL pointer dereference at 0000000000000008
[   38.475979] IP: scsi_put_command+0x31/0x5d
[   38.475981] PGD 0 
[   38.475983] P4D 0 
[   38.475984] 
[   38.475989] Oops: 0002 [#1] SMP
[   38.476013] Modules linked in:
[   38.476021] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.11.0-12455-g66de5f1 #1
[   38.476044] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[   38.476048] task: ffff88022a2c0000 task.stack: ffffc90000c54000
[   38.476053] RIP: 0010:scsi_put_command+0x31/0x5d
[   38.476055] RSP: 0000:ffff88023fc03e30 EFLAGS: 00010082
[   38.476081] RAX: 0000000000000246 RBX: ffff880207e70d40 RCX: 0000000000000000
[   38.476084] RDX: ffff880207e70d80 RSI: 0000000000000000 RDI: 0000000000000000
[   38.476086] RBP: ffff88023fc03e38 R08: 0000000000000000 R09: ffffffff81121b01
[   38.476110] R10: ffff88023fc03d68 R11: 0000000000000000 R12: ffff880207e70c00
[   38.476113] R13: ffff880207e70d40 R14: ffff880208010000 R15: 0000000000000000
[   38.476118] FS:  0000000000000000(0000) GS:ffff88023fc00000(0000) knlGS:0000000000000000
[   38.476142] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   38.476144] CR2: 0000000000000008 CR3: 0000000001e11000 CR4: 00000000000006f0
[   38.476175] Call Trace:
[   38.476178]  <IRQ>
[   38.476214]  scsi_end_request+0x130/0x17b
[   38.476241]  scsi_io_completion+0x1ce/0x49f
[   38.476246]  scsi_finish_command+0x113/0x11c
[   38.476272]  scsi_softirq_done+0xe5/0x107
[   38.476280]  blk_done_softirq+0x7c/0x83
[   38.476310]  __do_softirq+0xff/0x267
[   38.476339]  irq_exit+0x58/0x99
[   38.476345]  smp_apic_timer_interrupt+0x3d/0x48
[   38.476372]  apic_timer_interrupt+0x89/0x90
[   38.476402] RIP: 0010:console_unlock+0x221/0x42e
[   38.476404] RSP: 0000:ffffc90000c57d58 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff10
[   38.476410] RAX: 0000000000000000 RBX: ffffffff8212d220 RCX: 0000000000000000
[   38.476433] RDX: 00000000000003f9 RSI: 0000000000000046 RDI: 0000000000000246
[   38.476436] RBP: ffffc90000c57da0 R08: 0000000000000000 R09: 0000000000000000
[   38.476439] R10: ffffffff81aa0735 R11: ffffffff8212d227 R12: 0000000000000000
[   38.476442] R13: ffffffff81f561c0 R14: 0000000000000000 R15: 0000000000000040
[   38.476444]  </IRQ>
[   38.476474]  vprintk_emit+0x215/0x227
[   38.476503]  ? cnic_init+0x7f/0x7f
[   38.476507]  ? set_debug_rodata+0x17/0x17
[   38.476533]  vprintk_default+0x1d/0x1f
[   38.476537]  vprintk_func+0x4a/0x4c
[   38.476564]  printk+0x43/0x4b
[   38.476570]  bnx2x_init+0x1d/0xea
[   38.476574]  ? cnic_init+0x7f/0x7f
[   38.476600]  do_one_initcall+0x90/0x137
[   38.476605]  ? set_debug_rodata+0x17/0x17
[   38.476630]  kernel_init_freeable+0x179/0x1fc
[   38.476636]  ? rest_init+0x87/0x87
[   38.476661]  kernel_init+0xe/0xfa
[   38.476666]  ret_from_fork+0x2c/0x40
[   38.476669] Code: 48 89 e5 53 48 8b 47 38 48 89 fb 48 8d 78 38 e8 70 84 4a 00 48 8b 4b 40 48 8d 53 40 48 39 ca 75 02 0f 0b 48 8b 7b 40 48 8b 4b 48 <48> 89 4f 08 48 89 39 48 8b 73 38 48 89 53 40 48 89 53 48 48 8d 
[   38.476988] RIP: scsi_put_command+0x31/0x5d RSP: ffff88023fc03e30
[   38.476990] CR2: 0000000000000008
[   38.477022] ---[ end trace ab7b630f48deb907 ]---
[   38.477025] Kernel panic - not syncing: Fatal exception in interrupt
[   38.477574] Kernel Offset: disabled

Elapsed time: 50

initrds=(
	/osimage/debian/debian-x86_64-2016-08-31.cgz
	/lkp/scheduled/vm-lkp-wsx03-8G-8/boot-1-debian-x86_64-2016-08-31.cgz-66de5f1b197e175840a132f7ee8927bfc3ff92b3-20170518-26241-7cx5m4-0.cgz
	/lkp/lkp/lkp-x86_64.cgz
	/osimage/deps/debian-x86_64-2016-08-31.cgz/lkp_2017-05-01.cgz
	/osimage/deps/debian-x86_64-2016-08-31.cgz/rsync-rootfs_2016-11-15.cgz
	/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig_2016-11-15.cgz
	/pkg/linux/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/modules.cgz
)

cat "${initrds[@]}" > /fs/sdc1/initrd-vm-lkp-wsx03-8G-8

kvm=(
	qemu-system-x86_64
	-enable-kvm
	-cpu kvm64,+ssse3
	-kernel /pkg/linux/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/vmlinuz-4.11.0-12455-g66de5f1
	-initrd /fs/sdc1/initrd-vm-lkp-wsx03-8G-8
	-m 8192
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0,hostfwd=tcp::23697-:22
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sdc1/disk0-vm-lkp-wsx03-8G-8,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-vm-lkp-wsx03-8G-8
	-serial file:/dev/shm/kboot/vm-lkp-wsx03-8G-8/serial
	-serial file:/dev/shm/kboot/vm-lkp-wsx03-8G-8/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-lkp-wsx03-8G-8::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-lkp-wsx03-8G-8/boot-1-debian-x86_64-2016-08-31.cgz-66de5f1b197e175840a132f7ee8927bfc3ff92b3-20170518-26241-7cx5m4-0.yaml
	ARCH=x86_64
	kconfig=x86_64-kexec
	branch=linux-devel/devel-hourly-2017051802
	commit=66de5f1b197e175840a132f7ee8927bfc3ff92b3
	BOOT_IMAGE=/pkg/linux/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/vmlinuz-4.11.0-12455-g66de5f1
	max_uptime=600
	RESULT_ROOT=/result/boot/1/vm-lkp-wsx03-8G/debian-x86_64-2016-08-31.cgz/x86_64-kexec/gcc-6/66de5f1b197e175840a132f7ee8927bfc3ff92b3/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
)

"${kvm[@]}" -append "${append[*]}"
