early console in setup code
early console in extract_kernel
input_data: 0x03309069
input_len: 0x007b0ca2
output: 0x01000000
output_len: 0x0122c558
kernel_total_size: 0x02ad1000

Decompressing Linux... Parsing ELF... done.
Booting the kernel.
[    0.000000] random: get_random_bytes called from start_kernel+0x2a/0x3d0 with crng_init=0
[    0.000000] Linux version 4.13.0-rc6-00088-g7684b56d (kbuild@lkp-hsx02) (gcc version 5.4.1 20160904 (Debian 5.4.1-2)) #66 SMP PREEMPT Fri Aug 25 22:44:12 CST 2017
[    0.000000] x86/fpu: x87 FPU will use FXSAVE
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000013fddfff] usable
[    0.000000] BIOS-e820: [mem 0x0000000013fde000-0x0000000013ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
[    0.000000] debug: ignoring loglevel setting.
[    0.000000] bootconsole [earlyser0] enabled
[    0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[    0.000000] Hypervisor detected: KVM
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x13fde max_arch_pfn = 0x100000
[    0.000000] MTRR: Disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WT  UC- UC  WB  WT  UC- UC  
[    0.000000] Scan for SMP in [mem 0x00000000-0x000003ff]
[    0.000000] Scan for SMP in [mem 0x0009fc00-0x0009ffff]
[    0.000000] Scan for SMP in [mem 0x000f0000-0x000fffff]
[    0.000000] found SMP MP-table at [mem 0x000f6b80-0x000f6b8f] mapped at [400f6b80]
[    0.000000]   mpc: f6b90-f6c7c
[    0.000000] initial memory mapped: [mem 0x00000000-0x03ffffff]
[    0.000000] Base memory trampoline at [4009b000] 9b000 size 16384
[    0.000000] BRK [0x037cb000, 0x037cbfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x13d0a000-0x13fcffff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F6960 000014 (v00 BOCHS )
[    0.000000] ACPI: RSDT 0x0000000013FE1936 000030 (v01 BOCHS  BXPCRSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACP 0x0000000013FE180A 000074 (v01 BOCHS  BXPCFACP 00000001 BXPC 00000001)
[    0.000000] ACPI: DSDT 0x0000000013FE0040 0017CA (v01 BOCHS  BXPCDSDT 00000001 BXPC 00000001)
[    0.000000] ACPI: FACS 0x0000000013FE0000 000040
[    0.000000] ACPI: APIC 0x0000000013FE187E 000080 (v01 BOCHS  BXPCAPIC 00000001 BXPC 00000001)
[    0.000000] ACPI: HPET 0x0000000013FE18FE 000038 (v01 BOCHS  BXPCHPET 00000001 BXPC 00000001)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] mapped APIC to         ffffc000 (        fee00000)
[    0.000000] 0MB HIGHMEM available.
[    0.000000] 319MB LOWMEM available.
[    0.000000]   mapped low ram: 0 - 13fde000
[    0.000000]   low ram: 0 - 13fde000
[    0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00
[    0.000000] kvm-clock: cpu 0, msr 0:13fdd001, primary cpu clock
[    0.000000] kvm-clock: using sched offset of 317257684 cycles
[    0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000000001000-0x0000000013fddfff]
[    0.000000]   HighMem  empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009efff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x0000000013fddfff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000013fddfff]
[    0.000000] On node 0 totalpages: 81788
[    0.000000]   Normal zone: 640 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 81788 pages, LIFO batch:15
[    0.000000] Using APIC driver default
[    0.000000] ACPI: PM-Timer IO Port: 0x608
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
[    0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04
[    0.000000] ACPI: IRQ5 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] ACPI: IRQ10 used by override.
[    0.000000] ACPI: IRQ11 used by override.
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e
[    0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] mapped IOAPIC to ffffb000 (fec00000)
[    0.000000] e820: [mem 0x14000000-0xfeffbfff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on KVM
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:32 nr_cpumask_bits:32 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 341 pages/cpu @537e0000 s1372416 r0 d24320 u1396736
[    0.000000] pcpu-alloc: s1372416 r0 d24320 u1396736 alloc=341*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 
[    0.000000] KVM setup async PF for cpu 0
[    0.000000] kvm-stealtime: cpu 0, msr 137e2cc0
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 81148
[    0.000000] Kernel command line: ip=::::vm-kbuild-yocto-i386-53::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-kbuild-yocto-i386-53/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-7684b56d008c9141492e00de32c6c7b9ef0066d2-20170826-46668-upm9hj-0.yaml ARCH=i386 kconfig=i386-randconfig-a1-201734 branch=tip/WIP.x86/apic commit=7684b56d008c9141492e00de32c6c7b9ef0066d2 BOOT_IMAGE=/pkg/linux/i386-randconfig-a1-201734/gcc-5/7684b56d008c9141492e00de32c6c7b9ef0066d2/vmlinuz-4.13.0-rc6-00088-g7684b56d max_uptime=1500 RESULT_ROOT=/result/trinity/300s/vm-kbuild-yocto-i386/yocto-tiny-i386-2016-04-22.cgz/i386-randconfig-a1-201734/gcc-5/7684b56d008c9141492e00de32c6c7b9ef0066d2/0 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel earlyprintk=ttyS0,115200 console=ttyS0,115200 console=tty0 vg
[    0.000000] sysrq: sysrq always enabled.
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Initializing CPU#0
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at arch/x86/kernel/idt.c:355 update_intr_gate+0x16/0x21
[    0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 4.13.0-rc6-00088-g7684b56d #66
[    0.000000] task: 41edee00 task.stack: 41ed4000
[    0.000000] EIP: update_intr_gate+0x16/0x21
[    0.000000] EFLAGS: 00210002 CPU: 0
[    0.000000] EAX: 0000000e EBX: 420a4380 ECX: 4222c401 EDX: 41a1c930
[    0.000000] ESI: 3112fa61 EDI: 0209f0e0 EBP: 41ed5f68 ESP: 41ed5f68
[    0.000000]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[    0.000000] CR0: 80050033 CR2: 00000000 CR3: 0222e000 CR4: 00000690
[    0.000000] Call Trace:
[    0.000000]  kvm_apf_trap_init+0x17/0x19
[    0.000000]  trap_init+0x42/0x44
[    0.000000]  start_kernel+0x1c8/0x3d0
[    0.000000]  i386_start_kernel+0xa6/0xaa
[    0.000000]  startup_32_smp+0x164/0x166
[    0.000000] Code: 41 00 75 02 0f 0b b8 00 70 ec 41 ff 15 60 2d ef 41 5b 5e 5d c3 55 89 e5 e8 a0 63 ff fe 0f a3 05 00 14 23 42 0f 92 c1 84 c9 74 04 <0f> ff eb 05 e8 31 0b fd fe 5d c3 55 89 e5 e8 7f 63 ff fe c7 05
[    0.000000] random: get_random_bytes called from print_oops_end_marker+0x52/0x5f with crng_init=0
[    0.000000] ---[ end trace f68728a0d3053b52 ]---
[    0.000000] Initializing HighMem for node 0 (00000000:00000000)
[    0.000000] Memory: 277768K/327152K available (10363K kernel code, 1295K rwdata, 4812K rodata, 1920K init, 22080K bss, 49384K reserved, 0K cma-reserved, 0K highmem)
[    0.000000] virtual kernel memory layout:
[    0.000000]     fixmap  : 0xffd16000 - 0xfffff000   (2980 kB)
[    0.000000]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[    0.000000]     vmalloc : 0x547de000 - 0xff7fe000   (2736 MB)
[    0.000000]     lowmem  : 0x40000000 - 0x53fde000   ( 319 MB)
[    0.000000]       .init : 0x42042000 - 0x42222000   (1920 kB)
[    0.000000]       .data : 0x41a1ef60 - 0x42017f80   (6116 kB)
[    0.000000]       .text : 0x41000000 - 0x41a1ef60   (10363 kB)
[    0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[    0.000000] 
[    0.000000] **********************************************************
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **                                                      **
[    0.000000] ** trace_printk() being used. Allocating extra memory.  **
[    0.000000] **                                                      **
[    0.000000] ** This means that this is a DEBUG kernel and it is     **
[    0.000000] ** unsafe for production use.                           **
[    0.000000] **                                                      **
[    0.000000] ** If you see this message and you are not debugging    **
[    0.000000] ** the kernel, report this immediately to your vendor!  **
[    0.000000] **                                                      **
[    0.000000] **   NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE   **
[    0.000000] **********************************************************
[    0.003333] Preemptible hierarchical RCU implementation.
[    0.003333] 	RCU event tracing is enabled.
[    0.003333] 	RCU restricting CPUs from NR_CPUS=32 to nr_cpu_ids=2.
[    0.003333] 	RCU priority boosting: priority 1 delay 500 ms.
[    0.003333] 	RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout).
[    0.003333] 	Tasks RCU enabled.
[    0.003333] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.003333] NR_IRQS: 2304, nr_irqs: 440, preallocated irqs: 16
[    0.003333] CPU 0 irqstacks, hard=40252000 soft=40254000
[    0.003333] BUG: unable to handle kernel paging request at ffffffff
[    0.003333] IP: native_irq_enable+0x5/0x6
[    0.003333] *pde = 0222c063 
[    0.003333] *pte = 00000000 
[    0.003333] 
[    0.003333] Oops: 0000 [#1] PREEMPT SMP
[    0.003333] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G        W       4.13.0-rc6-00088-g7684b56d #66
[    0.003333] task: 41edee00 task.stack: 41ed4000
[    0.003333] EIP: native_irq_enable+0x5/0x6
[    0.003333] EFLAGS: 00210202 CPU: 0
[    0.003333] EAX: 00200006 EBX: 420a4380 ECX: 42222aec EDX: 00000001
[    0.003333] ESI: 3112fa61 EDI: 0209f0e0 EBP: 41ed5f94 ESP: 41ed5f7c
[    0.003333]  DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
[    0.003333] CR0: 80050033 CR2: ffffffff CR3: 0222e000 CR4: 00000690
[    0.003333] Call Trace:
[    0.003333]  ? start_kernel+0x2b1/0x3d0
[    0.003333]  i386_start_kernel+0xa6/0xaa
[    0.003333]  startup_32_smp+0x164/0x166
[    0.003333] Code: e0 5d c3 55 89 e5 0f 22 e0 5d c3 55 89 e5 0f 09 5d c3 55 89 e5 9c 58 5d c3 55 89 e5 50 9d 5d c3 55 89 e5 fa 5d c3 55 89 e5 fb 5d <c3> 55 89 e5 57 56 53 83 ec 04 89 c7 89 55 f0 89 ce 8b 00 8b 09
[    0.003333] EIP: native_irq_enable+0x5/0x6 SS:ESP: 0068:41ed5f7c
[    0.003333] CR2: 00000000ffffffff
[    0.003333] ---[ end trace f68728a0d3053b53 ]---
[    0.003333] Kernel panic - not syncing: Fatal exception

Elapsed time: 40

initrds=(
	/osimage/yocto/yocto-tiny-i386-2016-04-22.cgz
	/lkp/scheduled/vm-kbuild-yocto-i386-53/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-7684b56d008c9141492e00de32c6c7b9ef0066d2-20170826-46668-upm9hj-0.cgz
	/lkp/lkp/lkp-i386.cgz
	/osimage/deps/debian-x86_64-2016-08-31.cgz/run-ipconfig.i386_2016-09-03.cgz
	/osimage/pkg/static/trinity-i386.cgz
)

cat "${initrds[@]}" > /fs/sdc1/initrd-vm-kbuild-yocto-i386-53

kvm=(
	qemu-system-i386
	-enable-kvm
	-kernel /pkg/linux/i386-randconfig-a1-201734/gcc-5/7684b56d008c9141492e00de32c6c7b9ef0066d2/vmlinuz-4.13.0-rc6-00088-g7684b56d
	-initrd /fs/sdc1/initrd-vm-kbuild-yocto-i386-53
	-m 320
	-smp 2
	-device e1000,netdev=net0
	-netdev user,id=net0
	-boot order=nc
	-no-reboot
	-watchdog i6300esb
	-watchdog-action debug
	-rtc base=localtime
	-drive file=/fs/sdc1/disk0-vm-kbuild-yocto-i386-53,media=disk,if=virtio
	-pidfile /dev/shm/kboot/pid-vm-kbuild-yocto-i386-53
	-serial file:/dev/shm/kboot/vm-kbuild-yocto-i386-53/serial
	-serial file:/dev/shm/kboot/vm-kbuild-yocto-i386-53/kmsg
	-daemonize
	-display none
	-monitor null
)

append=(
	ip=::::vm-kbuild-yocto-i386-53::dhcp
	root=/dev/ram0
	user=lkp
	job=/lkp/scheduled/vm-kbuild-yocto-i386-53/trinity-300s-yocto-tiny-i386-2016-04-22.cgz-7684b56d008c9141492e00de32c6c7b9ef0066d2-20170826-46668-upm9hj-0.yaml
	ARCH=i386
	kconfig=i386-randconfig-a1-201734
	branch=tip/WIP.x86/apic
	commit=7684b56d008c9141492e00de32c6c7b9ef0066d2
	BOOT_IMAGE=/pkg/linux/i386-randconfig-a1-201734/gcc-5/7684b56d008c9141492e00de32c6c7b9ef0066d2/vmlinuz-4.13.0-rc6-00088-g7684b56d
	max_uptime=1500
	RESULT_ROOT=/result/trinity/300s/vm-kbuild-yocto-i386/yocto-tiny-i386-2016-04-22.cgz/i386-randconfig-a1-201734/gcc-5/7684b56d008c9141492e00de32c6c7b9ef0066d2/0
	LKP_SERVER=inn
	debug
	apic=debug
	sysrq_always_enabled
	rcupdate.rcu_cpu_stall_timeout=100
	net.ifnames=0
	printk.devkmsg=on
	panic=-1
	softlockup_panic=1
	nmi_watchdog=panic
	oops=panic
	load_ramdisk=2
	prompt_ramdisk=0
	drbd.minor_count=8
	systemd.log_level=err
	ignore_loglevel
	earlyprintk=ttyS0,115200
	console=ttyS0,115200
	console=tty0
	vga=normal
	rw
	drbd.minor_count=8
)

"${kvm[@]}" -append "${append[*]}"
