[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd033]
[    0.000000] Linux version 4.19.13 (builder@af7b57e6ee2f) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP PREEMPT Wed Jan 16 19:53:47 UTC 2019
[    0.000000] Machine model: HiKey Development Board
[    0.000000] Memory limited to 1820MB
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: EFI v2.60 by EDK II
[    0.000000] efi:  MEMATTR=0x3cd48a98 
[    0.000000] Reserved memory: created CMA memory pool at 0x000000006bc00000, size 128 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x0000000073ef2fff]
[    0.000000] NUMA: NODE_DATA [mem 0x73ea95c0-0x73eaad7f]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000000000000-0x0000000073ef2fff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000000000-0x0000000005dfffff]
[    0.000000]   node   0: [mem 0x0000000005f00000-0x0000000005f00fff]
[    0.000000]   node   0: [mem 0x0000000005f02000-0x0000000006dfefff]
[    0.000000]   node   0: [mem 0x0000000006e00000-0x000000000740efff]
[    0.000000]   node   0: [mem 0x0000000007410000-0x0000000021efffff]
[    0.000000]   node   0: [mem 0x0000000022000000-0x0000000034ffffff]
[    0.000000]   node   0: [mem 0x00000000350f0000-0x000000003864ffff]
[    0.000000]   node   0: [mem 0x0000000038650000-0x000000003888ffff]
[    0.000000]   node   0: [mem 0x0000000038890000-0x0000000038897fff]
[    0.000000]   node   0: [mem 0x0000000038898000-0x000000003889bfff]
[    0.000000]   node   0: [mem 0x000000003889c000-0x000000003d85ffff]
[    0.000000]   node   0: [mem 0x000000003d860000-0x000000003d89ffff]
[    0.000000]   node   0: [mem 0x000000003d8a0000-0x000000003d8affff]
[    0.000000]   node   0: [mem 0x000000003d8b0000-0x000000003d8fffff]
[    0.000000]   node   0: [mem 0x000000003d900000-0x000000003dffffff]
[    0.000000]   node   0: [mem 0x0000000040000000-0x0000000073ef2fff]
[    0.000000] Reserved but unavailable: 256 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000073ef2fff]
[    0.000000] On node 0 totalpages: 465920
[    0.000000]   DMA32 zone: 7420 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 465920 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] random: get_random_bytes called from start_kernel+0xac/0x414 with crng_init=0
[    0.000000] percpu: Embedded 22 pages/cpu @(____ptrval____) s53016 r8192 d28904 u90112
[    0.000000] pcpu-alloc: s53016 r8192 d28904 u90112 alloc=22*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: enabling workaround for ARM erratum 843419
[    0.000000] CPU features: enabling workaround for ARM erratum 845719
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 458500
[    0.000000] Policy zone: DMA32
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz root=PARTUUID=037e4376-5222-4a3c-9346-ade3645dac68 rootwait mem=1820M
[    0.000000] Memory: 1676320K/1863680K available (9980K kernel code, 1294K rwdata, 4312K rodata, 1152K init, 371K bss, 56288K reserved, 131072K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] arch_timer: cp15 timer(s) running at 1.20MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x11b661f8e, max_idle_ns: 1763180809113 ns
[    0.000004] sched_clock: 56 bits at 1200kHz, resolution 833ns, wraps every 4398046510838ns
[    0.000124] clocksource: arm,sp804: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
[    0.000133] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 111848106981ns
[    0.000796] Console: colour dummy device 80x25
[    0.001336] console [tty0] enabled
[    0.001420] Calibrating delay loop (skipped), value calculated using timer frequency.. 2.40 BogoMIPS (lpj=4800)
[    0.001443] pid_max: default: 32768 minimum: 301
[    0.001521] Security Framework initialized
[    0.002197] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.002543] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    0.002584] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.002612] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[    0.024000] ASID allocator initialised with 32768 entries
[    0.031996] rcu: Hierarchical SRCU implementation.
[    0.042074] Remapping and enabling EFI services.
[    0.048036] smp: Bringing up secondary CPUs ...
[    0.080283] Detected VIPT I-cache on CPU1
[    0.080337] CPU1: Booted secondary processor 0x0000000001 [0x410fd033]
[    0.112295] Detected VIPT I-cache on CPU2
[    0.112323] CPU2: Booted secondary processor 0x0000000002 [0x410fd033]
[    0.144356] Detected VIPT I-cache on CPU3
[    0.144381] CPU3: Booted secondary processor 0x0000000003 [0x410fd033]
[    0.176467] Detected VIPT I-cache on CPU4
[    0.176512] CPU4: Booted secondary processor 0x0000000100 [0x410fd033]
[    0.208477] Detected VIPT I-cache on CPU5
[    0.208502] CPU5: Booted secondary processor 0x0000000101 [0x410fd033]
[    0.240541] Detected VIPT I-cache on CPU6
[    0.240566] CPU6: Booted secondary processor 0x0000000102 [0x410fd033]
[    0.272606] Detected VIPT I-cache on CPU7
[    0.272631] CPU7: Booted secondary processor 0x0000000103 [0x410fd033]
[    0.272720] smp: Brought up 1 node, 8 CPUs
[    0.272851] SMP: Total of 8 processors activated.
[    0.272865] CPU features: detected: 32-bit EL0 Support
[    0.277445] CPU: All CPU(s) started at EL2
[    0.277491] alternatives: patching kernel code
[    0.278226] devtmpfs: initialized
[    0.284169] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.284235] futex hash table entries: 2048 (order: 5, 131072 bytes)
[    0.288401] pinctrl core: initialized pinctrl subsystem
[    0.289993] DMI not present or invalid.
[    0.290374] NET: Registered protocol family 16
[    0.290782] audit: initializing netlink subsys (disabled)
[    0.290933] audit: type=2000 audit(0.288:1): state=initialized audit_enabled=0 res=1
[    0.292346] cpuidle: using governor menu
[    0.292543] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
[    0.292562] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.294186] DMA: preallocated 256 KiB pool for atomic allocations
[    0.295334] Serial: AMBA PL011 UART driver
[    0.297569] f8015000.uart: ttyAMA0 at MMIO 0xf8015000 (irq = 7, base_baud = 0) is a PL011 rev2
[    0.303333] hi6220-mbox f7510000.mailbox: Mailbox enabled
[    0.316958] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.317589] cryptd: max_cpu_qlen set to 1000
[    0.318296] ACPI: Interpreter disabled.
[    0.319044] VDD_3V3: supplied by SYS_5V
[    0.319462] vgaarb: loaded
[    0.319706] SCSI subsystem initialized
[    0.319908] libata version 3.00 loaded.
[    0.320236] usbcore: registered new interface driver usbfs
[    0.320285] usbcore: registered new interface driver hub
[    0.320392] usbcore: registered new device driver usb
[    0.321043] pps_core: LinuxPPS API ver. 1 registered
[    0.321057] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.321090] PTP clock support registered
[    0.321205] EDAC MC: Ver: 3.0.0
[    0.322312] Registered efivars operations
[    0.323850] clocksource: Switched to clocksource arch_sys_counter
[    0.324018] VFS: Disk quotas dquot_6.6.0
[    0.324081] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.324215] pnp: PnP ACPI: disabled
[    0.329600] NET: Registered protocol family 2
[    0.330130] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
[    0.330205] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[    0.330349] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
[    0.330562] TCP: Hash tables configured (established 16384 bind 16384)
[    0.330671] UDP hash table entries: 1024 (order: 3, 32768 bytes)
[    0.330726] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
[    0.330882] NET: Registered protocol family 1
[    0.331221] RPC: Registered named UNIX socket transport module.
[    0.331235] RPC: Registered udp transport module.
[    0.331246] RPC: Registered tcp transport module.
[    0.331257] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.331274] PCI: CLS 0 bytes, default 64
[    0.331412] Unpacking initramfs...
[    0.424800] Freeing initrd memory: 2372K
[    0.428722] Initialise system trusted keyrings
[    0.428867] workingset: timestamp_bits=44 max_order=19 bucket_order=0
[    0.434574] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    0.435230] NFS: Registering the id_resolver key type
[    0.435264] Key type id_resolver registered
[    0.435275] Key type id_legacy registered
[    0.435292] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.435444] 9p: Installing v9fs 9p2000 file system support
[    0.435530] pstore: using deflate compression
[    0.437961] Key type asymmetric registered
[    0.437979] Asymmetric key parser 'x509' registered
[    0.438034] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
[    0.438052] io scheduler noop registered
[    0.438197] io scheduler cfq registered (default)
[    0.438211] io scheduler mq-deadline registered
[    0.438222] io scheduler kyber registered
[    0.441343] pinctrl-single f7010000.pinmux: 159 pins, size 636
[    0.441896] pinctrl-single f7010800.pinmux: 163 pins, size 652
[    0.442255] pinctrl-single f8001800.pinmux: 30 pins, size 120
[    0.444044] pl061_gpio f8011000.gpio: PL061 GPIO chip @0x00000000f8011000 registered
[    0.444297] pl061_gpio f8012000.gpio: PL061 GPIO chip @0x00000000f8012000 registered
[    0.444489] pl061_gpio f8013000.gpio: PL061 GPIO chip @0x00000000f8013000 registered
[    0.444588] gpio gpiochip3: names 9 do not match number of GPIOs 8
[    0.444688] pl061_gpio f8014000.gpio: PL061 GPIO chip @0x00000000f8014000 registered
[    0.444888] pl061_gpio f7020000.gpio: PL061 GPIO chip @0x00000000f7020000 registered
[    0.445049] pl061_gpio f7021000.gpio: PL061 GPIO chip @0x00000000f7021000 registered
[    0.445218] pl061_gpio f7022000.gpio: PL061 GPIO chip @0x00000000f7022000 registered
[    0.445381] pl061_gpio f7023000.gpio: PL061 GPIO chip @0x00000000f7023000 registered
[    0.445474] gpio gpiochip8: names 9 do not match number of GPIOs 8
[    0.445574] pl061_gpio f7024000.gpio: PL061 GPIO chip @0x00000000f7024000 registered
[    0.445739] pl061_gpio f7025000.gpio: PL061 GPIO chip @0x00000000f7025000 registered
[    0.445915] pl061_gpio f7026000.gpio: PL061 GPIO chip @0x00000000f7026000 registered
[    0.446089] pl061_gpio f7027000.gpio: PL061 GPIO chip @0x00000000f7027000 registered
[    0.446261] pl061_gpio f7028000.gpio: PL061 GPIO chip @0x00000000f7028000 registered
[    0.446433] pl061_gpio f7029000.gpio: PL061 GPIO chip @0x00000000f7029000 registered
[    0.446610] pl061_gpio f702a000.gpio: PL061 GPIO chip @0x00000000f702a000 registered
[    0.446791] pl061_gpio f702b000.gpio: PL061 GPIO chip @0x00000000f702b000 registered
[    0.446969] pl061_gpio f702c000.gpio: PL061 GPIO chip @0x00000000f702c000 registered
[    0.447145] pl061_gpio f702d000.gpio: PL061 GPIO chip @0x00000000f702d000 registered
[    0.447322] pl061_gpio f702e000.gpio: PL061 GPIO chip @0x00000000f702e000 registered
[    0.447491] pl061_gpio f702f000.gpio: PL061 GPIO chip @0x00000000f702f000 registered
[    0.456398] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.457944] SuperH (H)SCI(F) driver initialized
[    0.458266] msm_serial: driver initialized
[    0.465961] loop: module loaded
[    0.471986] libphy: Fixed MDIO Bus: probed
[    0.472850] tun: Universal TUN/TAP device driver, 1.6
[    0.473918] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    0.473939] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    0.473986] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
[    0.474001] igb: Copyright (c) 2007-2014 Intel Corporation.
[    0.474047] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    0.474063] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    0.474310] sky2: driver version 1.30
[    0.474747] VFIO - User Level meta-driver version: 0.3
[    0.475970] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.475993] ehci-pci: EHCI PCI platform driver
[    0.476034] ehci-platform: EHCI generic platform driver
[    0.476136] ehci-orion: EHCI orion driver
[    0.476213] ehci-exynos: EHCI EXYNOS driver
[    0.476286] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.476319] ohci-pci: OHCI PCI platform driver
[    0.476360] ohci-platform: OHCI generic platform driver
[    0.476442] ohci-exynos: OHCI EXYNOS driver
[    0.476784] usbcore: registered new interface driver usb-storage
[    0.478711] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc0
[    0.479087] rtc-pl031 f8003000.rtc: rtc core: registered pl031 as rtc1
[    0.479415] rtc-pl031 f8004000.rtc: rtc core: registered pl031 as rtc2
[    0.479943] i2c /dev entries driver
[    0.484258] sdhci: Secure Digital Host Controller Interface driver
[    0.484288] sdhci: Copyright(c) Pierre Ossman
[    0.484473] Synopsys Designware Multimedia Card Interface Driver
[    0.485086] dwmmc_k3 f723d000.dwmmc0: fifo-depth property not found, using value of FIFOTH register as default
[    0.485213] dwmmc_k3 f723d000.dwmmc0: IDMAC supports 32-bit address mode.
[    0.486392] dwmmc_k3 f723d000.dwmmc0: Using internal DMA controller.
[    0.486414] dwmmc_k3 f723d000.dwmmc0: Version ID is 250a
[    0.486467] dwmmc_k3 f723d000.dwmmc0: DW MMC controller at irq 41,32 bit host data width,256 deep fifo
[    0.486573] dwmmc_k3 f723d000.dwmmc0: Linked as a consumer to regulator.10
[    0.486651] mmc_host mmc0: card is non-removable.
[    0.499545] mmc_host mmc0: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
[    0.512877] dwmmc_k3 f723e000.dwmmc1: fifo-depth property not found, using value of FIFOTH register as default
[    0.513181] dwmmc_k3 f723e000.dwmmc1: IDMAC supports 32-bit address mode.
[    0.514114] dwmmc_k3 f723e000.dwmmc1: Using internal DMA controller.
[    0.514135] dwmmc_k3 f723e000.dwmmc1: Version ID is 250a
[    0.514195] dwmmc_k3 f723e000.dwmmc1: DW MMC controller at irq 42,32 bit host data width,128 deep fifo
[    0.514287] dwmmc_k3 f723e000.dwmmc1: Linked as a consumer to regulator.5
[    0.514338] dwmmc_k3 f723e000.dwmmc1: Linked as a consumer to regulator.4
[    0.514409] dwmmc_k3 f723e000.dwmmc1: Got CD GPIO
[    0.527411] mmc_host mmc1: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
[    0.541597] dwmmc_k3 f723f000.dwmmc2: fifo-depth property not found, using value of FIFOTH register as default
[    0.541738] dwmmc_k3 f723f000.dwmmc2: IDMAC supports 32-bit address mode.
[    0.543023] dwmmc_k3 f723f000.dwmmc2: Using internal DMA controller.
[    0.543048] dwmmc_k3 f723f000.dwmmc2: Version ID is 250a
[    0.543090] dwmmc_k3 f723f000.dwmmc2: DW MMC controller at irq 43,32 bit host data width,128 deep fifo
[    0.543203] dwmmc_k3 f723f000.dwmmc2: Linked as a consumer to regulator.2
[    0.543282] dwmmc_k3 f723f000.dwmmc2: allocated mmc-pwrseq
[    0.543298] mmc_host mmc2: card is non-removable.
[    0.556109] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 400000Hz, actual 400000HZ div = 31)
[    0.569562] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.571661] ledtrig-cpu: registered to indicate activity on CPUs
[    0.572735] usbcore: registered new interface driver usbhid
[    0.572758] usbhid: USB HID core driver
[    0.574832] NET: Registered protocol family 10
[    0.575498] Segment Routing with IPv6
[    0.575555] NET: Registered protocol family 17
[    0.575620] 9pnet: Installing 9P2000 support
[    0.575687] Key type dns_resolver registered
[    0.576849] registered taskstats version 1
[    0.576865] Loading compiled-in X.509 certificates
[    0.582939] f7111000.uart: ttyAMA1 at MMIO 0xf7111000 (irq = 8, base_baud = 0) is a PL011 rev2
[    0.583478] f7112000.uart: ttyAMA2 at MMIO 0xf7112000 (irq = 9, base_baud = 0) is a PL011 rev2
[    0.584023] f7113000.uart: ttyAMA3 at MMIO 0xf7113000 (irq = 10, base_baud = 0) is a PL011 rev2
[    0.603669] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 300000Hz, actual 295238HZ div = 42)
[    0.608676] mmc_host mmc0: Bus speed (slot 0) = 198400000Hz (slot req 200000000Hz, actual 198400000HZ div = 0)
[    0.612085] console [ttyAMA3] enabled
[    0.612714] 5V_HUB: supplied by SYS_5V
[    0.640409] mmc0: new HS200 MMC card at address 0001
[    0.645057] ssp-pl022 f7106000.spi: ARM PL022 driver, device ID: 0x00041022
[    0.652066] mmc_host mmc1: Bus speed (slot 0) = 99200000Hz (slot req 100000000Hz, actual 99200000HZ div = 0)
[    0.652637] mmcblk0: mmc0:0001 H8G1e 7.28 GiB 
[    0.653230] mmcblk0boot0: mmc0:0001 H8G1e partition 1 4.00 MiB
[    0.653834] mmcblk0boot1: mmc0:0001 H8G1e partition 2 4.00 MiB
[    0.654169] mmcblk0rpmb: mmc0:0001 H8G1e partition 3 4.00 MiB, chardev (241:0)
[    0.657260] ssp-pl022 f7106000.spi: mapped registers from 0x00000000f7106000 to (____ptrval____)
[    0.659627] mmc1: new ultra high speed SDR50 SDHC card at address 1234
[    0.660432] mmcblk1: mmc1:1234 SA16G 14.6 GiB 
[    0.665967] ssp-pl022 f7106000.spi: Failed to work in dma mode, work without dma!
[    1.579933] random: fast init done
[    1.589058] phy phy-soc:usbphy.0: Linked as a consumer to regulator.13
[    1.589075]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9
[    2.205567] dwmmc_k3 f723f000.dwmmc2: card claims to support voltages below defined range
[    2.214924] dwc2 f72c0000.usb: f72c0000.usb supply vusb_d not found, using dummy regulator
[    2.223365] dwc2 f72c0000.usb: Linked as a consumer to regulator.0
[    2.229675] dwc2 f72c0000.usb: f72c0000.usb supply vusb_a not found, using dummy regulator
[    2.229728]  mmcblk1: p1 p2
[    2.247792] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 25000000Hz, actual 24800000HZ div = 0)
[    2.259517] mmc2: new SDIO card at address 0001
[    2.448267] dwc2 f72c0000.usb: EPs: 16, dedicated fifos, 1920 entries in SPRAM
[    2.457753] dwc2 f72c0000.usb: DWC OTG Controller
[    2.462517] dwc2 f72c0000.usb: new USB bus registered, assigned bus number 1
[    2.469615] dwc2 f72c0000.usb: irq 39, io mem 0xf72c0000
[    2.476053] hub 1-0:1.0: USB hub found
[    2.479854] hub 1-0:1.0: 1 port detected
[    2.485738] rtc-efi rtc-efi: setting system clock to 1970-01-01 00:00:13 UTC (13)
[    2.493494] LDO2_2V8: disabling
[    2.496657] LDO13_1V8: disabling
[    2.499895] LDO14_2V8: disabling
[    2.503129] LDO17_2V5: disabling
[    2.506746] uart-pl011 f7113000.uart: no DMA platform data
[    2.512696] Freeing unused kernel memory: 1152K
[    2.517308] Run /init as init process
[    2.548758] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.552434] random: udevadm: uninitialized urandom read (16 bytes read)
[    2.556537] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    2.876216] dwc2 f72c0000.usb: Set speed to high-speed
[    2.881414] usb 1-1: new high-speed USB device number 2 using dwc2
[    3.072210] dwc2 f72c0000.usb: Set speed to high-speed
[    3.097490] hub 1-1:1.0: USB hub found
[    3.101379] hub 1-1:1.0: 3 ports detected
[    3.369870] EXT4-fs (mmcblk1p2): INFO: recovery required on readonly filesystem
[    3.377240] EXT4-fs (mmcblk1p2): write access will be enabled during recovery
[    4.372621] EXT4-fs (mmcblk1p2): recovery complete
[    4.382905] EXT4-fs (mmcblk1p2): mounted filesystem with ordered data mode. Opts: (null)
[    4.730135] systemd[1]: System time before build time, advancing clock.
[    4.768636] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    4.787099] systemd[1]: Detected architecture arm64.
[    4.813018] systemd[1]: Set hostname to <demo>.
[    5.041139] systemd[1]: Listening on Journal Audit Socket.
[    5.060288] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.084052] systemd[1]: Reached target Swap.
[    5.100247] systemd[1]: Listening on udev Control Socket.
[    5.120141] systemd[1]: Reached target Remote File Systems.
[    5.140342] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[    5.164212] systemd[1]: Reached target Encrypted Volumes.
[    5.390784] EXT4-fs (mmcblk1p2): re-mounted. Opts: (null)
[    5.419160] jailhouse: loading out-of-tree module taints kernel.
[    5.805098] systemd-journald[1604]: Received request to flush runtime journal from PID 1
[    5.995250] k3-dma f7370000.dma: initialized
[    6.079833] mmc_host mmc2: Bus speed (slot 0) = 24800000Hz (slot req 300000Hz, actual 295238HZ div = 42)
[    6.105213] wl1271_sdio: probe of mmc2:0001:1 failed with error -16
[    6.105252] wl1271_sdio: probe of mmc2:0001:2 failed with error -16
[    6.636052] random: crng init done
[    6.636064] random: 7 urandom warning(s) missed due to ratelimiting
 
