Add the compatibles and config for CCI on MSM8953, then enable these I2C
busses on Fairphone 3 and configure the EEPROM found with one of the
camera modules.
Signed-off-by: Luca Weiss <l...@lucaweiss.eu>
---
Luca Weiss (7):
dt-bindings: i2c: qcom-cci: Document msm8953 compatible
i2c: qcom-cci: Add msm8953 compatible
dt-bindings: eeprom: at24: Add compatible for Belling BL24S64
arm64: dts: qcom: msm8953: Re-sort tlmm pinctrl states
arm64: dts: qcom: msm8953: Add CCI nodes
arm64: dts: qcom: sdm632-fairphone-fp3: Add camera fixed regulators
arm64: dts: qcom: sdm632-fairphone-fp3: Enable CCI and add EEPROM
Documentation/devicetree/bindings/eeprom/at24.yaml | 1 +
.../devicetree/bindings/i2c/qcom,i2c-cci.yaml | 2 +
arch/arm64/boot/dts/qcom/msm8953.dtsi | 496 ++++++++++++---------
arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 57 +++
drivers/i2c/busses/i2c-qcom-cci.c | 46 ++
5 files changed, 382 insertions(+), 220 deletions(-)
---
base-commit: 1ad00588bc181aad8d76d86420d03042bc7e9acf
change-id: 20250808-msm8953-cci-587596df83da
Best regards,
--
Luca Weiss <l...@lucaweiss.eu>
