You know, after seeing that patch, that it just makes sense to add some of
those cleanups to the lm80 driver.
Shawn.
lm80-i2c-0-28
Adapter: SMBus PIIX4 adapter at fe00
+5V: +4.90 V (min = +4.74 V, max = +5.25 V)
VTT: +1.72 V (min = +1.70 V, max = +2.10 V)
+3.3V: +3.35 V (min = +3.14 V, max = +3.47 V)
+Vcore: +1.98 V (min = +1.90 V, max = +2.10 V)
+12V: +11.30 V (min = +11.18 V, max = +12.63 V)
-12V: -11.88 V (min = -12.60 V, max = -11.39 V)
-5V: -4.92 V (min = -5.25 V, max = -4.76 V)
fan1: 1679 RPM (min = 1328 RPM, div = 4)
temp: +32.38�C (hot: limit = +60�C, hyst = +65�C)
: (os: limit = +54�C, hyst = +56�C)
Driver works with changes applied.
Signed-off-by: Aurelien Jarno <[EMAIL PROTECTED]>
Signed-off-by: Shawn Starr <[EMAIL PROTECTED]>
* Note to self, dont use Kmail for raw diff files
--- linux-2.6.11-rc2/drivers/i2c/chips/lm80.c 2005-01-26 02:04:38.000000000 -0500
+++ linux-2.6.11-rc2-fixes/drivers/i2c/chips/lm80.c 2005-01-26 02:41:00.000000000 -0500
@@ -72,7 +72,7 @@ SENSORS_INSMOD_1(lm80);
static inline unsigned char FAN_TO_REG(unsigned rpm, unsigned div)
{
- if (rpm == 0)
+ if (rpm <= 0)
return 255;
rpm = SENSORS_LIMIT(rpm, 1, 1000000);
return SENSORS_LIMIT((1350000 + rpm*div / 2) / (rpm*div), 1, 254);
@@ -99,10 +99,7 @@ static inline long TEMP_FROM_REG(u16 tem
#define TEMP_LIMIT_TO_REG(val) SENSORS_LIMIT((val)<0?\
((val)-500)/1000:((val)+500)/1000,0,255)
-#define ALARMS_FROM_REG(val) (val)
-
#define DIV_FROM_REG(val) (1 << (val))
-#define DIV_TO_REG(val) ((val)==8?3:(val)==4?2:(val)==1?0:1)
/*
* Client data (each client gets its own)
@@ -269,7 +266,17 @@ static ssize_t set_fan_div(struct device
DIV_FROM_REG(data->fan_div[nr]));
val = simple_strtoul(buf, NULL, 10);
- data->fan_div[nr] = DIV_TO_REG(val);
+
+ switch (val) {
+ case 1: data->fan_div[nr] = 0; break;
+ case 2: data->fan_div[nr] = 1; break;
+ case 4: data->fan_div[nr] = 2; break;
+ case 8: data->fan_div[nr] = 3; break;
+ default:
+ dev_err(&client->dev, "fan_div value %ld not "
+ "supported. Choose one of 1, 2, 4 or 8!\n", val);
+ return -EINVAL;
+ }
reg = (lm80_read_value(client, LM80_REG_FANDIV) & ~(3 << (2 * (nr + 1))))
| (data->fan_div[nr] << (2 * (nr + 1)));
@@ -327,7 +334,7 @@ set_temp(os_hyst, temp_os_hyst, LM80_REG
static ssize_t show_alarms(struct device *dev, char *buf)
{
struct lm80_data *data = lm80_update_device(dev);
- return sprintf(buf, "%d\n", ALARMS_FROM_REG(data->alarms));
+ return sprintf(buf, "%u\n", data->alarms);
}
static DEVICE_ATTR(in0_min, S_IWUSR | S_IRUGO, show_in_min0, set_in_min0);
