Title: [9654] trunk/drivers/staging/iio/Documentation/sysfs-bus-iio-dds: merge from upstream: Staging: IIO: Direct digital synthesis abi documentation
- Revision
- 9654
- Author
- vapier
- Date
- 2011-03-01 15:57:56 -0500 (Tue, 01 Mar 2011)
Log Message
merge from upstream: Staging: IIO: Direct digital synthesis abi documentation
From: Michael Hennerich <[email protected]>
Changes since RFC/v1:
IIO: Apply list review feedback:
Apply list review feedback:
Restructure documentation according to list feedback.
Rename attributes to fit IIO convention used in other drivers.
Fix typos.
Provide ddsX_out_enable as opposed to ddsX_out_disable
Changes since v2:
IIO: sysfs-bus-iio-dds: Apply more list review feedback
Fix mixture of X and [n] notation for indices.
Fix some wording in the descriptions.
Signed-off-by: Michael Hennerich <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Added Paths
Diff
Added: trunk/drivers/staging/iio/Documentation/sysfs-bus-iio-dds (0 => 9654)
--- trunk/drivers/staging/iio/Documentation/sysfs-bus-iio-dds (rev 0)
+++ trunk/drivers/staging/iio/Documentation/sysfs-bus-iio-dds 2011-03-01 20:57:56 UTC (rev 9654)
@@ -0,0 +1,93 @@
+
+What: /sys/bus/iio/devices/.../ddsX_freqY
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ Stores frequency into tuning word Y.
+ There will be more than one ddsX_freqY file, which allows for
+ pin controlled FSK Frequency Shift Keying
+ (ddsX_pincontrol_freq_en is active) or the user can control
+ the desired active tuning word by writing Y to the
+ ddsX_freqsymbol file.
+
+What: /sys/bus/iio/devices/.../ddsX_freqY_scale
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ Scale to be applied to ddsX_freqY in order to obtain the
+ desired value in Hz. If shared across all frequency registers
+ Y is not present. It is also possible X is not present if
+ shared across all channels.
+
+What: /sys/bus/iio/devices/.../ddsX_freqsymbol
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ Specifies the active output frequency tuning word. The value
+ corresponds to the Y in ddsX_freqY. To exit this mode the user
+ can write ddsX_pincontrol_freq_en or ddsX_out_enable file.
+
+What: /sys/bus/iio/devices/.../ddsX_phaseY
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ Stores phase into Y.
+ There will be more than one ddsX_phaseY file, which allows for
+ pin controlled PSK Phase Shift Keying
+ (ddsX_pincontrol_phase_en is active) or the user can
+ control the desired phase Y which is added to the phase
+ accumulator output by writing Y to the en_phase file.
+
+What: /sys/bus/iio/devices/.../ddsX_phaseY_scale
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ Scale to be applied to ddsX_phaseY in order to obtain the
+ desired value in rad. If shared across all phase registers
+ Y is not present. It is also possible X is not present if
+ shared across all channels.
+
+What: /sys/bus/iio/devices/.../ddsX_phasesymbol
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ Specifies the active phase Y which is added to the phase
+ accumulator output. The value corresponds to the Y in
+ ddsX_phaseY. To exit this mode the user can write
+ ddsX_pincontrol_phase_en or disable file.
+
+What: /sys/bus/iio/devices/.../ddsX_pincontrol_en
+What: /sys/bus/iio/devices/.../ddsX_pincontrol_freq_en
+What: /sys/bus/iio/devices/.../ddsX_pincontrol_phase_en
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ ddsX_pincontrol_en: Both, the active frequency and phase is
+ controlled by the respective phase and frequency control inputs.
+ In case the device in question allows to independent controls,
+ then there are dedicated files (ddsX_pincontrol_freq_en,
+ ddsX_pincontrol_phase_en).
+
+What: /sys/bus/iio/devices/.../ddsX_out_enable
+What: /sys/bus/iio/devices/.../ddsX_outY_enable
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ ddsX_outY_enable controls signal generation on output Y of
+ channel X. Y may be suppressed if all channels are
+ controlled together.
+
+What: /sys/bus/iio/devices/.../ddsX_outY_wavetype
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ Specifies the output waveform.
+ (sine, triangle, ramp, square, ...)
+ For a list of available output waveform options read
+ available_output_modes.
+
+What: /sys/bus/iio/devices/.../ddsX_outY_wavetype_available
+KernelVersion: 2.6.37
+Contact: [email protected]
+Description:
+ Lists all available output waveform options.
_______________________________________________
Linux-kernel-commits mailing list
[email protected]
https://blackfin.uclinux.org/mailman/listinfo/linux-kernel-commits
