commit: http://blackfin.uclinux.org/git/?p=linux-kernel;a=commitdiff;h=fa86dd379dda0b4b74000fbbb6ed06335369926c branch: http://blackfin.uclinux.org/git/?p=linux-kernel;a=shortlog;h=refs/heads/trunk
Signed-off-by: Mike Frysinger <[email protected]> --- arch/blackfin/mach-bf533/boards/stamp.c | 38 +++++++++++++++++++++++++++ arch/blackfin/mach-bf537/boards/cm_bf537e.c | 22 +++++++++++++++ arch/blackfin/mach-bf537/boards/cm_bf537u.c | 34 ++++++++++++++++++++++++ arch/blackfin/mach-bf537/boards/stamp.c | 21 +++++++++++++++ arch/blackfin/mach-bf537/boards/tcm_bf537.c | 22 +++++++++++++++ arch/blackfin/mach-bf561/boards/cm_bf561.c | 22 +++++++++++++++ arch/blackfin/mach-bf561/boards/ezkit.c | 21 +++++++++++++++ 7 files changed, 180 insertions(+), 0 deletions(-) diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 43224ef..259d8b4 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -659,6 +659,41 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + /* Set PF0 to 0, PF1 to 1 make /AMS3 work properly */ + ret = gpio_request(GPIO_PF0, "net2272"); + if (ret) + return ret; + + ret = gpio_request(GPIO_PF1, "net2272"); + if (ret) { + gpio_free(GPIO_PF0); + return ret; + } + + ret = gpio_request(GPIO_PF11, "net2272"); + if (ret) { + gpio_free(GPIO_PF0); + gpio_free(GPIO_PF1); + return ret; + } + + gpio_direction_output(GPIO_PF0, 0); + gpio_direction_output(GPIO_PF1, 1); + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PF11, 0); + mdelay(2); + gpio_set_value(GPIO_PF11, 1); +#endif + + return 0; +} + static int __init stamp_init(void) { int ret; @@ -685,6 +720,9 @@ static int __init stamp_init(void) } #endif + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; } diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537e.c b/arch/blackfin/mach-bf537/boards/cm_bf537e.c index d582b81..3110e86 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537e.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537e.c @@ -766,6 +766,24 @@ static struct platform_device *cm_bf537e_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_30, "net2272"); + if (ret) + return ret; + + /* Reset USB Chip, PG14 */ + gpio_direction_output(GPIO_30, 0); + mdelay(2); + gpio_set_value(GPIO_30, 1); +#endif + + return 0; +} + static int __init cm_bf537e_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -777,6 +795,10 @@ static int __init cm_bf537e_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537u.c b/arch/blackfin/mach-bf537/boards/cm_bf537u.c index cbb8098..3011e4c 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537u.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537u.c @@ -731,6 +731,36 @@ static struct platform_device *cm_bf537u_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_47, driver_name); + if (ret) + return ret; + + ret = gpio_request(GPIO_45, "net2272"); + if (ret) { + gpio_free(GPIO_47); + return ret; + } + + /* Set PH15 Low make /AMS2 work properly */ + gpio_direction_output(GPIO_47, 0); + + /* enable CLKBUF output */ + bfin_write_VR_CTL(bfin_read_VR_CTL() | CLKBUFOE); + + /* Reset the USB chip */ + gpio_direction_output(GPIO_45, 0); + mdelay(2); + gpio_set_value(GPIO_45, 1); +#endif + + return 0; +} + static int __init cm_bf537u_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -742,6 +772,10 @@ static int __init cm_bf537u_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 9c589eb..ce5db0d 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -2930,6 +2930,24 @@ static struct platform_device *stamp_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PF6, "net2272"); + if (ret) + return ret; + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PF6, 0); + mdelay(2); + gpio_set_value(GPIO_PF6, 1); +#endif + + return 0; +} + static int __init stamp_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -2940,6 +2958,9 @@ static int __init stamp_init(void) ARRAY_SIZE(bfin_i2c_board_info)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c index 164a7e0..f1be97e 100644 --- a/arch/blackfin/mach-bf537/boards/tcm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -733,6 +733,24 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_30, "net2272"); + if (ret) + return ret; + + /* Reset USB Chip, PG14 */ + gpio_direction_output(GPIO_30, 0); + mdelay(2); + gpio_set_value(GPIO_30, 1); +#endif + + return 0; +} + static int __init tcm_bf537_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -744,6 +762,10 @@ static int __init tcm_bf537_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 87595cd..2e48136 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -532,6 +532,24 @@ static struct platform_device *cm_bf561_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PF46, "net2272"); + if (ret) + return ret; + + /* Reset USB Chip, PF46 */ + gpio_direction_output(GPIO_PF46, 0); + mdelay(2); + gpio_set_value(GPIO_PF46, 1); +#endif + + return 0; +} + static int __init cm_bf561_init(void) { printk(KERN_INFO "%s(): registering device resources\n", __func__); @@ -543,6 +561,10 @@ static int __init cm_bf561_init(void) #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) irq_set_status_flags(PATA_INT, IRQ_NOAUTOEN); #endif + + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + return 0; } diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index f667e77..82cc2b1 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -508,6 +508,24 @@ static struct platform_device *ezkit_devices[] __initdata = { #endif }; +static int __init net2272_init(void) +{ +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + int ret; + + ret = gpio_request(GPIO_PF11, "net2272"); + if (ret) + return ret; + + /* Reset the USB chip */ + gpio_direction_output(GPIO_PF11, 0); + mdelay(2); + gpio_set_value(GPIO_PF11, 1); +#endif + + return 0; +} + static int __init ezkit_init(void) { int ret; @@ -534,6 +552,9 @@ static int __init ezkit_init(void) udelay(400); #endif + if (net2272_init()) + pr_warning("unable to configure net2272; it probably won't work\n"); + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); return 0; }
_______________________________________________ Linux-kernel-commits mailing list [email protected] https://blackfin.uclinux.org/mailman/listinfo/linux-kernel-commits
