commit: http://blackfin.uclinux.org/git/?p=linux-kernel;a=commitdiff;h=07064af21163059fcdedb7cf971cebe6b00f40c8 branch: http://blackfin.uclinux.org/git/?p=linux-kernel;a=shortlog;h=refs/heads/trunk
Add a machine driver to support the EVAL-ADAU1X61 board connected to a Analog Devices BF5XX evaluation board. Signed-off-by: Lars-Peter Clausen <[email protected]> --- sound/soc/blackfin/Kconfig | 153 ++++++++++++++++++++++++++++ sound/soc/blackfin/Makefile | 2 + sound/soc/blackfin/bfin-eval-adau1x61.c | 165 +++++++++++++++++++++++++++++++ 3 files changed, 320 insertions(+), 0 deletions(-) diff --git a/sound/soc/blackfin/Kconfig b/sound/soc/blackfin/Kconfig index c40f407..a3438ed 100644 --- a/sound/soc/blackfin/Kconfig +++ b/sound/soc/blackfin/Kconfig @@ -40,6 +40,159 @@ config SND_SOC_BFIN_EVAL_ADAU1373 Note: This driver assumes that first ADAU1373 DAI is connected to the first SPORT port on the BF5XX board. +config SND_SOC_BFIN_EVAL_ADAU1X61 + tristate "Support for the EVAL-ADAU1X61 board on Blackfin eval boards" + depends on SND_BF5XX_I2S && I2C + select SND_BF5XX_SOC_I2S + select SND_SOC_ADAU1761 + help + Say Y if you want to add support for the Analog Devices EVAL-ADAU1X61 + board connected to one of the Blackfin evaluation boards like the + BF5XX-STAMP or BF5XX-EZKIT. + + Note: This driver assumes that the ADAU1X61 is connected to the + first SPORT port on the BF5XX board. + +config SND_SOC_BFIN_EVAL_ADAV80X + tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards" + depends on SND_BF5XX_I2S && (SPI_MASTER || I2C) + select SND_BF5XX_SOC_I2S + select SND_SOC_ADAV80X + help + Say Y if you want to add support for the Analog Devices EVAL-ADAV801 or + EVAL-ADAV803 board connected to one of the Blackfin evaluation boards + like the BF5XX-STAMP or BF5XX-EZKIT. + + Note: This driver assumes that the ADAV80X digital record and playback + interfaces are connected to the first SPORT port on the BF5XX board. + +config SND_BF5XX_SOC_AD73311 + tristate "SoC AD73311 Audio support for Blackfin" + depends on SND_BF5XX_I2S + select SND_BF5XX_SOC_I2S + select SND_SOC_AD73311 + help + Say Y if you want to add support for AD73311 codec on Blackfin. + +config SND_BFIN_AD73311_SE + int "PF pin for AD73311L Chip Select" + depends on SND_BF5XX_SOC_AD73311 + default 4 + help + Enter the GPIO used to control AD73311's SE pin. Acceptable + values are 0 to 7 + +config SND_BF5XX_TDM + tristate "SoC I2S(TDM mode) Audio for the ADI BF5xx chip" + depends on (BLACKFIN && SND_SOC) + select SND_BF5XX_SOC_SPORT + help + Say Y or M if you want to add support for codecs attached to + the Blackfin SPORT (synchronous serial ports) interface in TDM + mode. + You will also need to select the audio interfaces to support below. + +config SND_BF5XX_SOC_AD1836 + tristate "SoC AD1836 Audio support for BF5xx" + depends on SND_BF5XX_TDM + select SND_BF5XX_SOC_TDM + select SND_SOC_AD1836 + help + Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. + +config SND_BF5XX_SOC_AD193X + tristate "SoC AD193X Audio support for Blackfin" + depends on SND_BF5XX_TDM + select SND_BF5XX_SOC_TDM + select SND_SOC_AD193X + help + Say Y if you want to add support for AD193X codec on Blackfin. + This driver supports AD1936, AD1937, AD1938 and AD1939. + +config SND_BF5XX_AC97 + tristate "SoC AC97 Audio for the ADI BF5xx chip" + depends on BLACKFIN + select AC97_BUS + select SND_SOC_AC97_BUS + select SND_BF5XX_SOC_SPORT + select SND_BF5XX_SOC_AC97 + help + Say Y or M if you want to add support for codecs attached to + the Blackfin SPORT (synchronous serial ports) interface in slot 16 + mode (pseudo AC97 interface). + You will also need to select the audio interfaces to support below. + + Note: + AC97 codecs which do not implement the slot-16 mode will not function + properly with this driver. This driver is known to work with the + Analog Devices line of AC97 codecs. + +config SND_BF5XX_MMAP_SUPPORT + bool "Enable MMAP Support" + depends on SND_BF5XX_AC97 + default y + help + Say y if you want AC97 driver to support mmap mode. + We introduce an intermediate buffer to simulate mmap. + +config SND_BF5XX_MULTICHAN_SUPPORT + bool "Enable Multichannel Support" + depends on SND_BF5XX_AC97 + default n + help + Say y if you want AC97 driver to support up to 5.1 channel audio. + this mode will consume much more memory for DMA. + +config SND_BF5XX_HAVE_COLD_RESET + bool "BOARD has COLD Reset GPIO" + depends on SND_BF5XX_AC97 + default y if BFIN548_EZKIT + default n if !BFIN548_EZKIT + +config SND_BF5XX_RESET_GPIO_NUM + int "Set a GPIO for cold reset" + depends on SND_BF5XX_HAVE_COLD_RESET + range 0 159 + default 19 if BFIN548_EZKIT + default 5 if BFIN537_STAMP + default 0 + help + Set the correct GPIO for RESET the sound chip. + +config SND_BF5XX_SOC_AD1980 + tristate "SoC AD1980/1 Audio support for BF5xx (Obsolete)" + depends on SND_BF5XX_AC97 + select SND_BF5XX_SOC_AC97 + select SND_SOC_AD1980 + help + Say Y if you want to add support for SoC audio on BF5xx STAMP/EZKIT. + + Warning: + Because Analog Devices Inc. discontinued the ad1980 sound chip since + Sep. 2009, this ad1980 driver is not maintained, tested and supported + by ADI now. + +config SND_BF5XX_SOC_SPORT + tristate + +config SND_BF5XX_SOC_I2S + tristate + +config SND_BF5XX_SOC_TDM + tristate + +config SND_BF5XX_SOC_AC97 + tristate + +config SND_BF5XX_SPORT_NUM + int "Set a SPORT for Sound chip" + depends on (SND_BF5XX_I2S || SND_BF5XX_AC97 || SND_BF5XX_TDM) + range 0 3 if BF54x + range 0 1 if !BF54x + default 0 + help + Set the correct SPORT for sound chip. + config SND_SOC_BFIN_EVAL_ADAV80X tristate "Support for the EVAL-ADAV80X boards on Blackfin eval boards" depends on SND_BF5XX_I2S && (SPI_MASTER || I2C) diff --git a/sound/soc/blackfin/Makefile b/sound/soc/blackfin/Makefile index 6811862..0df7961 100644 --- a/sound/soc/blackfin/Makefile +++ b/sound/soc/blackfin/Makefile @@ -23,6 +23,7 @@ snd-ad73311-objs := bf5xx-ad73311.o snd-ad74111-objs := bf5xx-ad74111.o snd-ad193x-objs := bf5xx-ad193x.o snd-soc-bfin-eval-adau1373-objs := bfin-eval-adau1373.o +snd-soc-bfin-eval-adau1x61-objs := bfin-eval-adau1x61.o snd-soc-bfin-eval-adau1701-objs := bfin-eval-adau1701.o snd-soc-bfin-eval-adav80x-objs := bfin-eval-adav80x.o @@ -33,5 +34,6 @@ obj-$(CONFIG_SND_BF5XX_SOC_AD73311) += snd-ad73311.o obj-$(CONFIG_SND_BF5XX_SOC_AD74111) += snd-ad74111.o obj-$(CONFIG_SND_BF5XX_SOC_AD193X) += snd-ad193x.o obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1373) += snd-soc-bfin-eval-adau1373.o +obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61) += snd-soc-bfin-eval-adau1x61.o obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAU1701) += snd-soc-bfin-eval-adau1701.o obj-$(CONFIG_SND_SOC_BFIN_EVAL_ADAV80X) += snd-soc-bfin-eval-adav80x.o diff --git a/sound/soc/blackfin/bfin-eval-adau1x61.c b/sound/soc/blackfin/bfin-eval-adau1x61.c new file mode 100644 index 0000000..64f2216 --- /dev/null +++ b/sound/soc/blackfin/bfin-eval-adau1x61.c @@ -0,0 +1,165 @@ +/* + * Machine driver for EVAL-adau1x61MINIZ on Analog Devices bfin + * evaluation boards. + * + * Copyright 2011 Analog Devices Inc. + * Author: Lars-Peter Clausen <[email protected]> + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/module.h> +#include <linux/device.h> +#include <linux/slab.h> +#include <sound/core.h> +#include <sound/pcm.h> +#include <sound/soc.h> +#include <sound/pcm_params.h> + +#include "../codecs/adau17x1.h" + +static const struct snd_soc_dapm_widget bfin_eval_adau1x61_dapm_widgets[] = { + SND_SOC_DAPM_LINE("In 1", NULL), + SND_SOC_DAPM_LINE("In 2", NULL), + SND_SOC_DAPM_LINE("In 3-4", NULL), + + SND_SOC_DAPM_LINE("Diff Out L", NULL), + SND_SOC_DAPM_LINE("Diff Out R", NULL), + SND_SOC_DAPM_LINE("Stereo Out", NULL), + SND_SOC_DAPM_HP("Capless HP Out", NULL), +}; + +static const struct snd_soc_dapm_route bfin_eval_adau1x61_dapm_routes[] = { + { "LAUX", NULL, "In 3-4" }, + { "RAUX", NULL, "In 3-4" }, + { "LINP", NULL, "In 1" }, + { "LINN", NULL, "In 1"}, + { "RINP", NULL, "In 2" }, + { "RINN", NULL, "In 2" }, + + { "In 1", NULL, "MICBIAS" }, + { "In 2", NULL, "MICBIAS" }, + + { "Capless HP Out", NULL, "LHP" }, + { "Capless HP Out", NULL, "RHP" }, + { "Diff Out L", NULL, "LOUT" }, + { "Diff Out R", NULL, "ROUT" }, + { "Stereo Out", NULL, "LOUT" }, + { "Stereo Out", NULL, "ROUT" }, +}; + +static int bfin_eval_adau1x61_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *cpu_dai = rtd->cpu_dai; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int pll_rate; + int ret; + + ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret) + return ret; + + ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S | + SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBM_CFM); + if (ret) + return ret; + + switch (params_rate(params)) { + case 48000: + case 8000: + case 12000: + case 16000: + case 24000: + case 32000: + case 96000: + pll_rate = 48000 * 1024; + break; + case 44100: + case 7350: + case 11025: + case 14700: + case 22050: + case 29400: + case 88200: + pll_rate = 44100 * 1024; + break; + default: + return -EINVAL; + } + + ret = snd_soc_dai_set_pll(codec_dai, ADAU17X1_PLL, + ADAU17X1_PLL_SRC_MCLK, 12288000, pll_rate); + if (ret) + return ret; + + ret = snd_soc_dai_set_sysclk(codec_dai, ADAU17X1_CLK_SRC_PLL, pll_rate, + SND_SOC_CLOCK_IN); + + return ret; +} + +static struct snd_soc_ops bfin_eval_adau1x61_ops = { + .hw_params = bfin_eval_adau1x61_hw_params, +}; + +static struct snd_soc_dai_link bfin_eval_adau1x61_dai = { + .name = "adau1x61", + .stream_name = "adau1x61", + .cpu_dai_name = "bfin-i2s.0", + .codec_dai_name = "adau-hifi", + .platform_name = "bfin-i2s-pcm-audio", + .codec_name = "adau1761.0-0038", + .ops = &bfin_eval_adau1x61_ops, +}; + +static const struct snd_soc_card bfin_eval_adau1x61 = { + .name = "bfin-eval-adau1x61", + .driver_name = "eval-adau1x61", + .dai_link = &bfin_eval_adau1x61_dai, + .num_links = 1, + + .dapm_widgets = bfin_eval_adau1x61_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(bfin_eval_adau1x61_dapm_widgets), + .dapm_routes = bfin_eval_adau1x61_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(bfin_eval_adau1x61_dapm_routes), +}; + +static int bfin_eval_adau1x61_probe(struct platform_device *pdev) +{ + struct snd_soc_card *card; + + card = kmemdup(&bfin_eval_adau1x61, sizeof(bfin_eval_adau1x61), + GFP_KERNEL); + card->dev = &pdev->dev; + + return snd_soc_register_card(card); +} + +static int __devexit bfin_eval_adau1x61_remove(struct platform_device *pdev) +{ + struct snd_soc_card *card = platform_get_drvdata(pdev); + + snd_soc_unregister_card(card); + kfree(card); + + return 0; +} + +static struct platform_driver bfin_eval_adau1x61_driver = { + .driver = { + .name = "bfin-eval-adau1x61", + .owner = THIS_MODULE, + .pm = &snd_soc_pm_ops, + }, + .probe = bfin_eval_adau1x61_probe, + .remove = __devexit_p(bfin_eval_adau1x61_remove), +}; +module_platform_driver(bfin_eval_adau1x61_driver); + +MODULE_AUTHOR("Lars-Peter Clausen <[email protected]>"); +MODULE_DESCRIPTION("ALSA SoC bfin adau1x61 driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:bfin-eval-adau1x61");
_______________________________________________ Linux-kernel-commits mailing list [email protected] https://blackfin.uclinux.org/mailman/listinfo/linux-kernel-commits
