commit: http://blackfin.uclinux.org/git/?p=linux-kernel;a=commitdiff;h=1cd5b4b550bad55e6b92408ff24bc1ecc475354a branch: http://blackfin.uclinux.org/git/?p=linux-kernel;a=shortlog;h=refs/heads/trunk
Signed-off-by: Aaron Wu <[email protected]> --- arch/blackfin/include/asm/bfin_sport.h | 1 + arch/blackfin/mach-bf537/boards/stamp.c | 61 +++++++++++++++++++++++++++---- 2 files changed, 54 insertions(+), 8 deletions(-) diff --git a/arch/blackfin/include/asm/bfin_sport.h b/arch/blackfin/include/asm/bfin_sport.h index 0afcfbd..f8907ea 100644 --- a/arch/blackfin/include/asm/bfin_sport.h +++ b/arch/blackfin/include/asm/bfin_sport.h @@ -24,6 +24,7 @@ struct sport_config { /* TDM (multichannels), I2S or other mode */ unsigned int mode:3; + unsigned int polled; /* use poll instead of irq when set */ /* if TDM mode is selected, channels must be set */ int channels; /* Must be in 8 units */ diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index cadaa71..d356d06 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -2426,7 +2426,13 @@ static struct i2c_board_info __initdata bfin_i2c_board_info[] = { }, #endif }; - +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) \ +|| defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +unsigned short bfin_sport0_peripherals[] = { + P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, + P_SPORT0_DRPRI, P_SPORT0_RSCLK, P_SPORT0_DRSEC, P_SPORT0_DTSEC, 0 +}; +#endif #if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) #ifdef CONFIG_SERIAL_BFIN_SPORT0_UART static struct resource bfin_sport0_uart_resources[] = { @@ -2447,11 +2453,6 @@ static struct resource bfin_sport0_uart_resources[] = { }, }; -static unsigned short bfin_sport0_peripherals[] = { - P_SPORT0_TFS, P_SPORT0_DTPRI, P_SPORT0_TSCLK, P_SPORT0_RFS, - P_SPORT0_DRPRI, P_SPORT0_RSCLK, 0 -}; - static struct platform_device bfin_sport0_uart_device = { .name = "bfin-sport-uart", .id = 0, @@ -2497,7 +2498,49 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif #endif - +#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) +static struct resource bfin_sport0_resources[] = { + { + .start = SPORT0_TCR1, + .end = SPORT0_MRCS3+4, + .flags = IORESOURCE_MEM, + }, + { + .start = IRQ_SPORT0_RX, + .end = IRQ_SPORT0_RX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_TX, + .end = IRQ_SPORT0_TX+1, + .flags = IORESOURCE_IRQ, + }, + { + .start = IRQ_SPORT0_ERROR, + .end = IRQ_SPORT0_ERROR, + .flags = IORESOURCE_IRQ, + }, + { + .start = CH_SPORT0_TX, + .end = CH_SPORT0_TX, + .flags = IORESOURCE_DMA, + }, + { + .start = CH_SPORT0_RX, + .end = CH_SPORT0_RX, + .flags = IORESOURCE_DMA, + }, +}; +static struct platform_device bfin_sport0_device = { + .name = "bfin_sport_raw", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sport0_resources), + .resource = bfin_sport0_resources, + .dev = { + .platform_data = &bfin_sport0_peripherals, /* Passed to driver */ + }, +}; +#endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) #define CF_IDE_NAND_CARD_USE_HDD_INTERFACE /* #define CF_IDE_NAND_CARD_USE_CF_IN_COMMON_MEMORY_MODE */ @@ -2825,7 +2868,9 @@ static struct platform_device bf5xx_adau1701_device = { static struct platform_device *stamp_devices[] __initdata = { &bfin_dpmc, - +#if defined(CONFIG_BFIN_SPORT) || defined(CONFIG_BFIN_SPORT_MODULE) + &bfin_sport0_device, +#endif #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, #endif
_______________________________________________ Linux-kernel-commits mailing list [email protected] https://blackfin.uclinux.org/mailman/listinfo/linux-kernel-commits
