commit: http://blackfin.uclinux.org/git/?p=linux-kernel;a=commitdiff;h=da5b24e8332c6938472b8a540b678963d0e943f9 branch: http://blackfin.uclinux.org/git/?p=linux-kernel;a=shortlog;h=refs/heads/trunk
Move DMC config array to head file. Add MMR bits defition for DMC and RCU. Make the DMC reconfig process comply with HRM. Signed-off-by: Sonic Zhang <[email protected]> --- arch/blackfin/include/asm/mem_init.h | 108 ++++++++++++++ .../mach-bf609/include/mach/defBF60x_base.h | 44 ++++++ arch/blackfin/mach-common/clocks-init.c | 149 ++++---------------- 3 files changed, 177 insertions(+), 124 deletions(-) diff --git a/arch/blackfin/include/asm/mem_init.h b/arch/blackfin/include/asm/mem_init.h index 2375799..c6c3644 100644 --- a/arch/blackfin/include/asm/mem_init.h +++ b/arch/blackfin/include/asm/mem_init.h @@ -277,3 +277,111 @@ #else #define PLL_BYPASS 0 #endif + +#ifdef CONFIG_BF60x +#define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF) +#define CGU_DIV_VAL \ + ((CONFIG_CCLK_DIV << CSEL_OFFSET) | \ + (CONFIG_SCLK_DIV << SYSSEL_OFFSET) | \ + (CONFIG_SCLK0_DIV << S0SEL_OFFSET) | \ + (CONFIG_SCLK1_DIV << S1SEL_OFFSET) | \ + (CONFIG_DCLK_DIV << DSEL_OFFSET)) + +#define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000) +#if ((CONFIG_BFIN_DCLK != 125) && \ + (CONFIG_BFIN_DCLK != 133) && (CONFIG_BFIN_DCLK != 150) && \ + (CONFIG_BFIN_DCLK != 166) && (CONFIG_BFIN_DCLK != 200) && \ + (CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250)) +#error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz" +#endif +struct ddr_config { + u32 ddr_clk; + u32 dmc_ddrctl; + u32 dmc_ddrcfg; + u32 dmc_ddrtr0; + u32 dmc_ddrtr1; + u32 dmc_ddrtr2; + u32 dmc_ddrmr; + u32 dmc_ddrmr1; +}; + +struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = { + [0] = { + .ddr_clk = 125, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20705212, + .dmc_ddrtr1 = 0x201003CF, + .dmc_ddrtr2 = 0x00320107, + .dmc_ddrmr = 0x00000422, + .dmc_ddrmr1 = 0x4, + }, + [1] = { + .ddr_clk = 133, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20806313, + .dmc_ddrtr1 = 0x2013040D, + .dmc_ddrtr2 = 0x00320108, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [2] = { + .ddr_clk = 150, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x20160492, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [3] = { + .ddr_clk = 166, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20A07323, + .dmc_ddrtr1 = 0x2016050E, + .dmc_ddrtr2 = 0x00320209, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [4] = { + .ddr_clk = 200, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20a07323, + .dmc_ddrtr1 = 0x2016050f, + .dmc_ddrtr2 = 0x00320509, + .dmc_ddrmr = 0x00000632, + .dmc_ddrmr1 = 0x4, + }, + [5] = { + .ddr_clk = 225, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x302006DB, + .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, + [6] = { + .ddr_clk = 250, + .dmc_ddrctl = 0x00000904, + .dmc_ddrcfg = 0x00000422, + .dmc_ddrtr0 = 0x20E0A424, + .dmc_ddrtr1 = 0x3020079E, + .dmc_ddrtr2 = 0x0032020D, + .dmc_ddrmr = 0x00000842, + .dmc_ddrmr1 = 0x4, + }, +}; +#else +#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ +#define PLL_CTL_VAL \ + (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ + (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) +#endif + + diff --git a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h index 6aac385..3dbdd5e 100644 --- a/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h +++ b/arch/blackfin/mach-bf609/include/mach/defBF60x_base.h @@ -2665,6 +2665,33 @@ #define DEVSZ_1G 0x400 /* DMC External Bank Size = 1Gbit */ #define DEVSZ_2G 0x500 /* DMC External Bank Size = 2Gbit */ +/* DMC status bits */ +#define IDLE 0x1 +#define MEMINITDONE 0x2 +#define SRACK 0x8 +#define PDACK 0x10 +#define DPDACK 0x20 +#define DLLCALDONE 0x2000 +#define PENDREF 0xF0000 +#define PHYRDPHASE 0xF00000 +#define PHYRDPHASE_OFFSET 20 + +/* DMC control bits */ +#define LPDDR 0x2 +#define INIT 0x4 +#define SRREQ 0x8 +#define PDREQ 0x10 +#define DPDREQ 0x20 +#define PREC 0x40 +#define ADDRMODE 0x100 +#define RDTOWR 0xE00 +#define PPREF 0x1000 +#define DLLCAL 0x2000 + +/* DMC DLL control bits */ +#define DLLCALRDCNT 0xFF +#define DATACYC 0xF00 +#define DATACYC_OFFSET 8 /* ========================= L2CTL Registers @@ -3198,6 +3225,23 @@ #define CGU0_DIV 0xFFCA8008 /* CGU0 Divisor Register */ #define CGU0_CLKOUTSEL 0xFFCA800C /* CGU0 CLKOUT Select Register */ +/* CGU Divisor bits */ +#define CSEL_OFFSET 0 +#define S0SEL_OFFSET 5 +#define SYSSEL_OFFSET 8 +#define S1SEL_OFFSET 13 +#define DSEL_OFFSET 16 +#define OSEL_OFFSET 22 +#define ALGN 0x20000000 +#define UPDT 0x40000000 +#define LOCK 0x80000000 + +/* CGU Status bits */ +#define PLLEN 0x1 +#define PLLBP 0x2 +#define PLOCK 0x4 +#define CLKSALGN 0x8 + /* ========================= DPM Registers diff --git a/arch/blackfin/mach-common/clocks-init.c b/arch/blackfin/mach-common/clocks-init.c index 7ad2407..e760782 100644 --- a/arch/blackfin/mach-common/clocks-init.c +++ b/arch/blackfin/mach-common/clocks-init.c @@ -15,122 +15,6 @@ #include <asm/mem_init.h> #include <asm/dpmc.h> -#ifdef CONFIG_BF60x -#define CSEL_P 0 -#define S0SEL_P 5 -#define SYSSEL_P 8 -#define S1SEL_P 13 -#define DSEL_P 16 -#define OSEL_P 22 -#define ALGN_P 29 -#define UPDT_P 30 -#define LOCK_P 31 - -#define CGU_CTL_VAL ((CONFIG_VCO_MULT << 8) | CLKIN_HALF) -#define CGU_DIV_VAL \ - ((CONFIG_CCLK_DIV << CSEL_P) | \ - (CONFIG_SCLK_DIV << SYSSEL_P) | \ - (CONFIG_SCLK0_DIV << S0SEL_P) | \ - (CONFIG_SCLK1_DIV << S1SEL_P) | \ - (CONFIG_DCLK_DIV << DSEL_P)) - -#define CONFIG_BFIN_DCLK (((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT) / CONFIG_DCLK_DIV) / 1000000) -#if ((CONFIG_BFIN_DCLK != 125) && \ - (CONFIG_BFIN_DCLK != 133) && (CONFIG_BFIN_DCLK != 150) && \ - (CONFIG_BFIN_DCLK != 166) && (CONFIG_BFIN_DCLK != 200) && \ - (CONFIG_BFIN_DCLK != 225) && (CONFIG_BFIN_DCLK != 250)) -#error "DCLK must be in (125, 133, 150, 166, 200, 225, 250)MHz" -#endif -struct ddr_config { - u32 ddr_clk; - u32 dmc_ddrctl; - u32 dmc_ddrcfg; - u32 dmc_ddrtr0; - u32 dmc_ddrtr1; - u32 dmc_ddrtr2; - u32 dmc_ddrmr; - u32 dmc_ddrmr1; -}; - -struct ddr_config ddr_config_table[] __attribute__((section(".data_l1"))) = { - [0] = { - .ddr_clk = 125, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20705212, - .dmc_ddrtr1 = 0x201003CF, - .dmc_ddrtr2 = 0x00320107, - .dmc_ddrmr = 0x00000422, - .dmc_ddrmr1 = 0x4, - }, - [1] = { - .ddr_clk = 133, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20806313, - .dmc_ddrtr1 = 0x2013040D, - .dmc_ddrtr2 = 0x00320108, - .dmc_ddrmr = 0x00000632, - .dmc_ddrmr1 = 0x4, - }, - [2] = { - .ddr_clk = 150, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20A07323, - .dmc_ddrtr1 = 0x20160492, - .dmc_ddrtr2 = 0x00320209, - .dmc_ddrmr = 0x00000632, - .dmc_ddrmr1 = 0x4, - }, - [3] = { - .ddr_clk = 166, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20A07323, - .dmc_ddrtr1 = 0x2016050E, - .dmc_ddrtr2 = 0x00320209, - .dmc_ddrmr = 0x00000632, - .dmc_ddrmr1 = 0x4, - }, - [4] = { - .ddr_clk = 200, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20a07323, - .dmc_ddrtr1 = 0x2016050f, - .dmc_ddrtr2 = 0x00320509, - .dmc_ddrmr = 0x00000632, - .dmc_ddrmr1 = 0x4, - }, - [5] = { - .ddr_clk = 225, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20E0A424, - .dmc_ddrtr1 = 0x302006DB, - .dmc_ddrtr2 = 0x0032020D, - .dmc_ddrmr = 0x00000842, - .dmc_ddrmr1 = 0x4, - }, - [6] = { - .ddr_clk = 250, - .dmc_ddrctl = 0x00000904, - .dmc_ddrcfg = 0x00000422, - .dmc_ddrtr0 = 0x20E0A424, - .dmc_ddrtr1 = 0x3020079E, - .dmc_ddrtr2 = 0x0032020D, - .dmc_ddrmr = 0x00000842, - .dmc_ddrmr1 = 0x4, - }, -}; -#else -#define SDGCTL_WIDTH (1 << 31) /* SDRAM external data path width */ -#define PLL_CTL_VAL \ - (((CONFIG_VCO_MULT & 63) << 9) | CLKIN_HALF | \ - (PLL_BYPASS << 8) | (ANOMALY_05000305 ? 0 : 0x8000)) -#endif - __attribute__((l1_text)) static void do_sync(void) { @@ -147,15 +31,32 @@ void init_clocks(void) #ifdef CONFIG_BF60x int i, dlldatacycle, dll_ctl; + + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() | SRREQ); + do_sync(); + while (!(bfin_read_DMC0_STAT() & SRACK)) + continue; + } + bfin_write32(CGU0_DIV, CGU_DIV_VAL); bfin_write32(CGU0_CTL, CGU_CTL_VAL); - while ((bfin_read32(CGU0_STAT) & 0x8) || !(bfin_read32(CGU0_STAT) & 0x4)) + while ((bfin_read32(CGU0_STAT) & (CLKSALGN | PLLBP)) || + !(bfin_read32(CGU0_STAT) & PLOCK)) continue; - bfin_write32(CGU0_DIV, CGU_DIV_VAL | (1 << UPDT_P)); - while (bfin_read32(CGU0_STAT) & (1 << 3)) + bfin_write32(CGU0_DIV, CGU_DIV_VAL | UPDT); + while (bfin_read32(CGU0_STAT) & CLKSALGN) continue; + + if (bfin_read_DMC0_STAT() & MEMINITDONE) { + bfin_write_DMC0_CTL(bfin_read_DMC0_CTL() & ~SRREQ); + do_sync(); + while (bfin_read_DMC0_STAT() & SRACK) + continue; + } + for (i = 0; i < 7; i++) { if (ddr_config_table[i].ddr_clk == CONFIG_BFIN_DCLK) { bfin_write_DDR0_CFG(ddr_config_table[i].dmc_ddrcfg); @@ -170,16 +71,16 @@ void init_clocks(void) } do_sync(); - while (!(bfin_read_DDR0_STAT() & 0x4)) + while (!(bfin_read_DMC0_STAT() & MEMINITDONE)) continue; - dlldatacycle = (bfin_read_DDR0_STAT() & 0x00f00000) >> 20; + dlldatacycle = (bfin_read_DMC0_STAT() & PHYRDPHASE) >> PHYRDPHASE_OFFSET; dll_ctl = bfin_read_DDR0_DLLCTL(); - dll_ctl &= 0x0ff; - bfin_write_DDR0_DLLCTL(dll_ctl | (dlldatacycle << 8)); + dll_ctl &= ~DATACYC; + bfin_write_DMC0_DLLCTL(dll_ctl | (dlldatacycle << DATACYC_OFFSET)); do_sync(); - while (!(bfin_read_DDR0_STAT() & 0x2000)) + while (!(bfin_read_DMC0_STAT() & DLLCALDONE)) continue; #else size_t i;
_______________________________________________ Linux-kernel-commits mailing list [email protected] https://blackfin.uclinux.org/mailman/listinfo/linux-kernel-commits
