I get some oops whenever I try to insmod sb
here are some of them, in the hope that someone can track down the problem
Unable to handle kernel paging request at virtual address ca8fc1a0
ca88a49d
*pde = 07f8a063
Oops: 0000
CPU: 0
EIP: 0010:[usbcore:__insmod_usbcore_S.bss_L96+166557/5043409]
EFLAGS: 00010286
eax: ca8fc1a0 ebx: c1f5ec60 ecx: 00000000 edx: 00000000
esi: c704d920 edi: 00000000 ebp: 00000000 esp: c7025f00
ds: 0018 es: 0018 ss: 0018
Process aumix (pid: 939, stackpage=c7025000)
Stack: 00000000 c704d920 c36c4540 c128c640 00000000 c704d920 c36c4540 c128c640
c7024000 00000001 c74d2ac0 c6009005 c36c4540 c012b062 c36c4540 c704d920
c704d920 c36c4540 00000000 c012a371 c36c4540 c704d920 00000000 c6009000
Call Trace: [chrdev_open+62/76] [dentry_open+189/328] [filp_open+82/92]
[sys_open+56/180] [system_call+51/56]
Code: 8b 10 85 d2 74 1d 52 e8 bf d1 88 f5 83 c4 04 85 c0 74 14 8b
Using defaults from ksymoops -t elf32-i386 -a i386
Code; 00000000 Before first symbol
0000000000000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 10 mov (%eax),%edx
Code; 00000002 Before first symbol
2: 85 d2 test %edx,%edx
Code; 00000004 Before first symbol
4: 74 1d je 23 <_EIP+0x23> 00000023 Before first symbol
Code; 00000006 Before first symbol
6: 52 push %edx
Code; 00000007 Before first symbol
7: e8 bf d1 88 f5 call f588d1cb <_EIP+0xf588d1cb> f588d1cb
<END_OF_CODE+2afb034c/????>
Code; 0000000c Before first symbol
c: 83 c4 04 add $0x4,%esp
Code; 0000000f Before first symbol
f: 85 c0 test %eax,%eax
Code; 00000011 Before first symbol
11: 74 14 je 27 <_EIP+0x27> 00000027 Before first symbol
Code; 00000013 Before first symbol
13: 8b 00 mov (%eax),%eax
---------------------------------------------------------------------------
Unable to handle kernel paging request at virtual address ca8fc1a0
ca88a49d
*pde = 07f8a063
Oops: 0000
CPU: 0
EIP: 0010:[usbcore:__insmod_usbcore_S.bss_L96+166557/5043409]
EFLAGS: 00010286
eax: ca8fc1a0 ebx: c0558440 ecx: 00000003 edx: 00000003
esi: c2abc3e0 edi: 00000003 ebp: 00000003 esp: c2ff9f00
ds: 0018 es: 0018 ss: 0018
Process esd (pid: 1781, stackpage=c2ff9000)
Stack: 00000000 c2abc3e0 c3d209e0 c128c640 00000000 c2abc3e0 c3d209e0 c128c640
72616863 6a616d2d 312d726f 00000034 00000287 c012b062 c3d209e0 c2abc3e0
c2abc3e0 c3d209e0 00000000 c012a371 c3d209e0 c2abc3e0 00000000 c45b2000
Call Trace: [chrdev_open+62/76] [dentry_open+189/328] [filp_open+82/92]
[sys_open+56/180] [system_call+51/56]
Code: 8b 10 85 d2 74 1d 52 e8 bf d1 88 f5 83 c4 04 85 c0 74 14 8b
Code; 00000000 Before first symbol
0000000000000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 10 mov (%eax),%edx
Code; 00000002 Before first symbol
2: 85 d2 test %edx,%edx
Code; 00000004 Before first symbol
4: 74 1d je 23 <_EIP+0x23> 00000023 Before first symbol
Code; 00000006 Before first symbol
6: 52 push %edx
Code; 00000007 Before first symbol
7: e8 bf d1 88 f5 call f588d1cb <_EIP+0xf588d1cb> f588d1cb
<END_OF_CODE+2afb034c/????>
Code; 0000000c Before first symbol
c: 83 c4 04 add $0x4,%esp
Code; 0000000f Before first symbol
f: 85 c0 test %eax,%eax
Code; 00000011 Before first symbol
11: 74 14 je 27 <_EIP+0x27> 00000027 Before first symbol
Code; 00000013 Before first symbol
13: 8b 00 mov (%eax),%eax
-----------------------------------------------------------------------------
This is what appeared in the logs right before the 2nd oops
Sep 25 14:08:35 penny kernel: Soundblaster audio driver Copyright (C) by Hannu
Savolainen 1993-1996
Sep 25 14:08:35 penny kernel: sb: No ISAPnP cards found, trying standard ones...
Sep 25 14:08:35 penny kernel: SB 4.13 detected OK (220)
Sep 25 14:08:35 penny kernel: <Sound Blaster 16 (4.13)> at 0x220 irq 5 dma 1,5
Sep 25 14:08:35 penny kernel: <Sound Blaster 16> at 0x330 irq 5 dma 0,0
Sep 25 14:08:35 penny kernel: sb: I/O region in use.
Sep 25 14:08:35 penny kernel: Sound: Hmm, DMA1 was left allocated - fixed
Sep 25 14:08:35 penny kernel: Sound: Hmm, DMA5 was left allocated - fixed
Sep 25 14:08:35 penny insmod: /lib/modules/2.4.0-test8/kernel/drivers/sound/sb.o:
init_module: No such device
Sep 25 14:08:35 penny insmod: Hint: insmod errors can be caused by incorrect module
parameters, including invalid IO or IRQ parameters
Sep 25 14:08:35 penny insmod: /lib/modules/2.4.0-test8/kernel/drivers/sound/sb.o:
insmod char-major-14 failed
Sep 25 14:08:35 penny kernel: Unable to handle kernel paging request at virtual
address ca8fc1a0
------------------------------------------------------------------------------
root@penny:/usr/src/linux/scripts # . ver_linux
-- Versions installed: (if some fields are empty or look
-- unusual then possibly you have very old versions)
Linux penny 2.4.0-test8 #1 Sun Sep 24 13:30:48 CEST 2000 i686 unknown
Kernel modules 2.3.16
Gnu C 2.95.2
Binutils 2.10.0.26
Linux C Library 2.1.3
Dynamic linker ldd: version 1.9.11
Procps 2.0.6
Mount 2.10o
Net-tools 2.05
Console-tools 0.2.3
Sh-utils 2.0i
Modules Loaded soundcore agpgart ipv6 nfsd lockd sunrpc af_packet eepro100
3c509 uhci usbcore ipchains
root@penny:/usr/src/linux/scripts # cat /proc/modules
soundcore 3920 3 (autoclean)
agpgart 13232 2 (autoclean)
ipv6 115920 -1 (autoclean)
nfsd 66608 1 (autoclean)
lockd 48768 1 (autoclean) [nfsd]
sunrpc 57904 1 (autoclean) [nfsd lockd]
af_packet 10912 9 (autoclean)
eepro100 16912 1 (autoclean)
3c509 7104 1 (autoclean)
uhci 18608 0 (autoclean) (unused)
usbcore 43616 1 (autoclean) [uhci]
ipchains 32688 0 (unused)
root@penny:/usr/src/linux/scripts # rmmod soundcore
soundcore: Device or resource busy
--
-------------------------------------------------------------------------------
Pierfrancesco Caci | ik5pvx | mailto:[EMAIL PROTECTED] - http://gusp.dyndns.org
Firenze - Italia | Office for the Complication of Otherwise Simple Affairs
Linux penny 2.4.0-test8 #1 Sun Sep 24 13:30:48 CEST 2000 i686 unknown
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
