Linux version 2.4.0-test10 (grendel@grendel) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #2 Fri Oct 20 00:58:18 CEST 2000
BIOS-provided physical RAM map:
 BIOS-e820: 000000000009fc00 @ 0000000000000000 (usable)
 BIOS-e820: 0000000000000400 @ 000000000009fc00 (reserved)
 BIOS-e820: 0000000000010000 @ 00000000000f0000 (reserved)
 BIOS-e820: 0000000007ef0000 @ 0000000000100000 (usable)
 BIOS-e820: 0000000000008000 @ 0000000007ff0000 (ACPI data)
 BIOS-e820: 0000000000008000 @ 0000000007ff8000 (ACPI NVS)
 BIOS-e820: 0000000000010000 @ 00000000ffff0000 (reserved)
On node 0 totalpages: 32752
zone(0): 4096 pages.
zone(1): 28656 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/hdb1 video=atyfb:800x600@72 hda=autotune hdb=autotune hdc=slow
ide_setup: hda=autotune
ide_setup: hdb=autotune
ide_setup: hdc=slow
Initializing CPU#0
Detected 600.046 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1196.03 BogoMIPS
Memory: 126564k/131008k available (1345k kernel code, 4056k reserved, 82k data, 212k init, 0k highmem)
Dentry-cache hash table entries: 16384 (order: 5, 131072 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 8192 (order: 4, 65536 bytes)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: L1 I Cache: 64K  L1 D Cache: 64K (64 bytes/line)
CPU: L2 Cache: 1K
CPU: AMD Athlon(tm) Processor stepping 00
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.36 (20000221) Richard Gooch (rgooch@atnf.csiro.au)
PCI: PCI BIOS revision 2.10 entry at 0xfdb71, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd v1.8
atyfb: 3D RAGE IIC (AGP) [0x475a rev 0x3a] 4M EDO, 14.31818 MHz XTAL, 230 MHz PLL, 83 Mhz MCLK
Console: switching to colour frame buffer device 100x37
fb0: ATY Mach64 frame buffer device on PCI
pty: 256 Unix98 ptys configured
Uniform Multi-Platform E-IDE driver Revision: 6.31
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller on PCI bus 00 dev 39
VP_IDE: chipset revision 16
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686a IDE UDMA66 controller on pci0:7.1
    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
hda: SAMSUNG WU33205A (3.2GB), ATA DISK drive
hdb: SAMSUNG SV1022D, ATA DISK drive
hdc: JTS Corp. PALLADIUM Model P1000-2AF, ATA DISK drive
hdd: CD-ROM CDU77E, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: 6330240 sectors (3241 MB) w/109KiB Cache, CHS=785/128/63, UDMA(33)
hdb: 19931184 sectors (10205 MB) w/472KiB Cache, CHS=1240/255/63, UDMA(66)
hdc: 1957536 sectors (1002 MB) w/32KiB Cache, CHS=1942/16/63, DMA
Partition check:
 hda: hda1 hda2
 hdb: hdb1 hdb2 < hdb5 hdb6 hdb7 hdb8 hdb9 >
 hdc: [PTBL] [971/32/63] hdc1 hdc2
Serial driver version 5.02 (2000-08-09) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 94M
agpgart: Detected Via Apollo Pro KT133 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
SCSI subsystem driver Revision: 1.00
request_module[scsi_hostadapter]: Root fs not mounted
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 8192)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
ACPI: support found
ACPI: PBLK 1 @ 0x0810:0
ACPI: S1 supported
ACPI: S5 supported
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 212k freed
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hdb: dma_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: dma_intr: error=0x84 { DriveStatusError BadCRC }
hda: DMA disabled
ide0: reset: success
hdb: DMA disabled
hda: DMA disabled
Adding Swap: 127976k swap-space (priority -1)
reiserfs: checking transaction log (device 03:47) ...
reiserfs: replayed 1 transactions in 4 seconds
Using tea hash to sort names
ReiserFS version 3.6.18
reiserfs: checking transaction log (device 03:49) ...
Using tea hash to sort names
ReiserFS version 3.6.18
MSDOS FS: Using codepage 852
