Add and remove space as per coding style for loops,comma , open and
close parenthesis.It also removes whitespace.
This patch is to the ataflop.c file that fixes up following ERRORs
reported by checkpatch:
- space prohibited before that close parenthesis ')'
- space prohibited after that open parenthesis '('
- trailing whitespace
- space required after that ',' (ctx:VxV)
- space required before the open parenthesis '('
Signed-off-by: Punit Vara <[email protected]>
---
drivers/block/ataflop.c | 244 ++++++++++++++++++++++++------------------------
1 file changed, 122 insertions(+), 122 deletions(-)
diff --git a/drivers/block/ataflop.c b/drivers/block/ataflop.c
index 5b31772..62763fd 100644
--- a/drivers/block/ataflop.c
+++ b/drivers/block/ataflop.c
@@ -32,7 +32,7 @@
* the FDC will otherwise wait forever when no disk is inserted...
*
* ++ Freddi Aschwanden (fa) 20.9.95 fixes for medusa:
- * - MFPDELAY() after each FDC access -> atari
+ * - MFPDELAY() after each FDC access -> atari
* - more/other disk formats
* - DMA to the block buffer directly if we have a 32bit DMA
* - for medusa, the step rate is always 3ms
@@ -45,7 +45,7 @@
* Roman 10/15/95:
* - implement some more ioctls
* - disk formatting
- *
+ *
* Andreas 95/12/12:
* - increase gap size at start of track for HD/ED disks
*
@@ -95,39 +95,39 @@ static struct atari_disk_type {
} atari_disk_type[] = {
{ "d360", 9, 720, 0, 0}, /* 0: 360kB diskette */
{ "D360", 9, 720, 0, 1}, /* 1: 360kb in 720k or 1.2MB drive */
- { "D720", 9,1440, 0, 0}, /* 2: 720kb in 720k or 1.2MB drive */
- { "D820", 10,1640, 0, 0}, /* 3: DD disk with 82 tracks/10
sectors */
+ { "D720", 9, 1440, 0, 0}, /* 2: 720kb in 720k or 1.2MB drive */
+ { "D820", 10, 1640, 0, 0}, /* 3: DD disk with 82 tracks/10
sectors */
/* formats above are probed for type DD */
#define MAX_TYPE_DD 3
- { "h1200",15,2400, 3, 0}, /* 4: 1.2MB diskette */
- { "H1440",18,2880, 3, 0}, /* 5: 1.4 MB diskette (HD) */
- { "H1640",20,3280, 3, 0}, /* 6: 1.64MB diskette (fat HD) 82 tr
20 sec */
+ { "h1200", 15, 2400, 3, 0}, /* 4: 1.2MB diskette */
+ { "H1440", 18, 2880, 3, 0}, /* 5: 1.4 MB diskette (HD) */
+ { "H1640", 20, 3280, 3, 0}, /* 6: 1.64MB diskette (fat HD) 82 tr
20 sec */
/* formats above are probed for types DD and HD */
#define MAX_TYPE_HD 6
- { "E2880",36,5760, 3, 0}, /* 7: 2.8 MB diskette (ED) */
- { "E3280",40,6560, 3, 0}, /* 8: 3.2 MB diskette (fat ED) 82 tr
40 sec */
+ { "E2880", 36, 5760, 3, 0}, /* 7: 2.8 MB diskette (ED) */
+ { "E3280", 40, 6560, 3, 0}, /* 8: 3.2 MB diskette (fat ED) 82 tr
40 sec */
/* formats above are probed for types DD, HD and ED */
#define MAX_TYPE_ED 8
/* types below are never autoprobed */
- { "H1680",21,3360, 3, 0}, /* 9: 1.68MB diskette (fat HD) 80 tr
21 sec */
- { "h410",10,820, 0, 1}, /* 10: 410k diskette 41 tr 10 sec,
stretch */
- { "h1476",18,2952, 3, 0}, /* 11: 1.48MB diskette 82 tr 18 sec */
- { "H1722",21,3444, 3, 0}, /* 12: 1.72MB diskette 82 tr 21 sec */
- { "h420",10,840, 0, 1}, /* 13: 420k diskette 42 tr 10 sec,
stretch */
- { "H830",10,1660, 0, 0}, /* 14: 820k diskette 83 tr 10 sec */
- { "h1494",18,2952, 3, 0}, /* 15: 1.49MB diskette 83 tr 18 sec */
- { "H1743",21,3486, 3, 0}, /* 16: 1.74MB diskette 83 tr 21 sec */
- { "h880",11,1760, 0, 0}, /* 17: 880k diskette 80 tr 11 sec */
- { "D1040",13,2080, 0, 0}, /* 18: 1.04MB diskette 80 tr 13 sec */
- { "D1120",14,2240, 0, 0}, /* 19: 1.12MB diskette 80 tr 14 sec */
- { "h1600",20,3200, 3, 0}, /* 20: 1.60MB diskette 80 tr 20 sec */
- { "H1760",22,3520, 3, 0}, /* 21: 1.76MB diskette 80 tr 22 sec */
- { "H1920",24,3840, 3, 0}, /* 22: 1.92MB diskette 80 tr 24 sec */
- { "E3200",40,6400, 3, 0}, /* 23: 3.2MB diskette 80 tr 40 sec */
- { "E3520",44,7040, 3, 0}, /* 24: 3.52MB diskette 80 tr 44 sec */
- { "E3840",48,7680, 3, 0}, /* 25: 3.84MB diskette 80 tr 48 sec */
- { "H1840",23,3680, 3, 0}, /* 26: 1.84MB diskette 80 tr 23 sec */
- { "D800",10,1600, 0, 0}, /* 27: 800k diskette 80 tr 10 sec */
+ { "H1680", 21, 3360, 3, 0}, /* 9: 1.68MB diskette (fat HD) 80 tr
21 sec */
+ { "h410", 10, 820, 0, 1}, /* 10: 410k diskette 41 tr 10
sec, stretch */
+ { "h1476", 18, 2952, 3, 0}, /* 11: 1.48MB diskette 82 tr 18 sec */
+ { "H1722", 21, 3444, 3, 0}, /* 12: 1.72MB diskette 82 tr 21 sec */
+ { "h420", 10, 840, 0, 1}, /* 13: 420k diskette 42 tr 10
sec, stretch */
+ { "H830", 10, 1660, 0, 0}, /* 14: 820k diskette 83 tr 10 sec */
+ { "h1494", 18, 2952, 3, 0}, /* 15: 1.49MB diskette 83 tr 18 sec */
+ { "H1743", 21, 3486, 3, 0}, /* 16: 1.74MB diskette 83 tr 21 sec */
+ { "h880", 11, 1760, 0, 0}, /* 17: 880k diskette 80 tr 11 sec */
+ { "D1040", 13, 2080, 0, 0}, /* 18: 1.04MB diskette 80 tr 13 sec */
+ { "D1120", 14, 2240, 0, 0}, /* 19: 1.12MB diskette 80 tr 14 sec */
+ { "h1600", 20, 3200, 3, 0}, /* 20: 1.60MB diskette 80 tr 20 sec */
+ { "H1760", 22, 3520, 3, 0}, /* 21: 1.76MB diskette 80 tr 22 sec */
+ { "H1920", 24, 3840, 3, 0}, /* 22: 1.92MB diskette 80 tr 24 sec */
+ { "E3200", 40, 6400, 3, 0}, /* 23: 3.2MB diskette 80 tr 40 sec */
+ { "E3520", 44, 7040, 3, 0}, /* 24: 3.52MB diskette 80 tr 44 sec */
+ { "E3840", 48, 7680, 3, 0}, /* 25: 3.84MB diskette 80 tr 48 sec */
+ { "H1840", 23, 3680, 3, 0}, /* 26: 1.84MB diskette 80 tr 23 sec */
+ { "D800", 10, 1600, 0, 0}, /* 27: 800k diskette 80 tr 10 sec */
};
static int StartDiskType[] = {
@@ -199,7 +199,7 @@ static struct atari_disk_type user_params[FD_MAX_UNITS];
/*
* User-provided permanent type information. 'drive' points to
- * the respective entry of this array. Set by FDDEFPRM ioctls,
+ * the respective entry of this array. Set by FDDEFPRM ioctls,
* restored upon disk change by floppy_revalidate() if valid (as seen by
* default_params[].blocks > 0 - a bit in unit[].flags might be used for this?)
*/
@@ -241,7 +241,7 @@ static struct atari_floppy_struct {
__val & 0xff; \
})
-#define FDC_WRITE(reg,val) \
+#define FDC_WRITE(reg, val) \
do { \
/* unsigned long __flags; */ \
/* local_irq_save(__flags); */ \
@@ -250,7 +250,7 @@ static struct atari_floppy_struct {
dma_wd.fdc_acces_seccount = (val); \
MFPDELAY(); \
/* local_irq_restore(__flags); */ \
- } while(0)
+ } while (0)
/* Buffering variables:
@@ -281,7 +281,7 @@ static int BufferDrive, BufferSide, BufferTrack;
static int read_track; /* non-zero if we are reading whole tracks */
#define SECTOR_BUFFER(sec) (TrackBuffer + ((sec)-1)*512)
-#define IS_BUFFERED(drive,side,track) \
+#define IS_BUFFERED(drive, side, track) \
(BufferDrive == (drive) && BufferSide == (side) && BufferTrack == (track))
/*
@@ -339,35 +339,35 @@ static int NeedSeek = 0;
/***************************** Prototypes *****************************/
-static void fd_select_side( int side );
-static void fd_select_drive( int drive );
-static void fd_deselect( void );
-static void fd_motor_off_timer( unsigned long dummy );
-static void check_change( unsigned long dummy );
+static void fd_select_side(int side);
+static void fd_select_drive(int drive);
+static void fd_deselect(void);
+static void fd_motor_off_timer(unsigned long dummy);
+static void check_change(unsigned long dummy);
static irqreturn_t floppy_irq (int irq, void *dummy);
-static void fd_error( void );
+static void fd_error(void);
static int do_format(int drive, int type, struct atari_format_descr *desc);
-static void do_fd_action( int drive );
-static void fd_calibrate( void );
-static void fd_calibrate_done( int status );
-static void fd_seek( void );
-static void fd_seek_done( int status );
-static void fd_rwsec( void );
-static void fd_readtrack_check( unsigned long dummy );
-static void fd_rwsec_done( int status );
+static void do_fd_action(int drive);
+static void fd_calibrate(void);
+static void fd_calibrate_done(int status);
+static void fd_seek(void);
+static void fd_seek_done(int status);
+static void fd_rwsec(void);
+static void fd_readtrack_check(unsigned long dummy);
+static void fd_rwsec_done(int status);
static void fd_rwsec_done1(int status);
-static void fd_writetrack( void );
-static void fd_writetrack_done( int status );
-static void fd_times_out( unsigned long dummy );
-static void finish_fdc( void );
-static void finish_fdc_done( int dummy );
-static void setup_req_params( int drive );
-static void redo_fd_request( void);
+static void fd_writetrack(void);
+static void fd_writetrack_done(int status);
+static void fd_times_out(unsigned long dummy);
+static void finish_fdc(void);
+static void finish_fdc_done(int dummy);
+static void setup_req_params(int drive);
+static void redo_fd_request(void);
static int fd_locked_ioctl(struct block_device *bdev, fmode_t mode, unsigned
int
cmd, unsigned long param);
-static void fd_probe( int drive );
-static int fd_test_drive_present( int drive );
-static void config_types( void );
+static void fd_probe(int drive);
+static int fd_test_drive_present(int drive);
+static void config_types(void);
static int floppy_open(struct block_device *bdev, fmode_t mode);
static void floppy_release(struct gendisk *disk, fmode_t mode);
@@ -377,7 +377,7 @@ static DEFINE_TIMER(motor_off_timer, fd_motor_off_timer, 0,
0);
static DEFINE_TIMER(readtrack_timer, fd_readtrack_check, 0, 0);
static DEFINE_TIMER(timeout_timer, fd_times_out, 0, 0);
static DEFINE_TIMER(fd_timer, check_change, 0, 0);
-
+
static void fd_end_request_cur(int err)
{
if (!__blk_end_request_cur(fd_request, err))
@@ -390,7 +390,7 @@ static inline void start_motor_off_timer(void)
MotorOffTrys = 0;
}
-static inline void start_check_change_timer( void )
+static inline void start_check_change_timer(void)
{
mod_timer(&fd_timer, jiffies + CHECK_CHANGE_DELAY);
}
@@ -407,13 +407,13 @@ static inline void stop_timeout(void)
/* Select the side to use. */
-static void fd_select_side( int side )
+static void fd_select_side(int side)
{
unsigned long flags;
/* protect against various other ints mucking around with the PSG */
local_irq_save(flags);
-
+
sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
sound_ym.wd_data = (side == 0) ? sound_ym.rd_data_reg_sel | 0x01 :
sound_ym.rd_data_reg_sel & 0xfe;
@@ -426,11 +426,11 @@ static void fd_select_side( int side )
* clock speed for this disk's type.
*/
-static void fd_select_drive( int drive )
+static void fd_select_drive(int drive)
{
unsigned long flags;
unsigned char tmp;
-
+
if (drive == SelectedDrive)
return;
@@ -443,28 +443,28 @@ static void fd_select_drive( int drive )
local_irq_restore(flags);
/* restore track register to saved value */
- FDC_WRITE( FDCREG_TRACK, UD.track );
+ FDC_WRITE(FDCREG_TRACK, UD.track);
udelay(25);
/* select 8/16 MHz */
if (UDT)
if (ATARIHW_PRESENT(FDCSPEED))
dma_wd.fdc_speed = UDT->fdc_speed;
-
+
SelectedDrive = drive;
}
/* Deselect both drives. */
-static void fd_deselect( void )
+static void fd_deselect(void)
{
unsigned long flags;
/* protect against various other ints mucking around with the PSG */
local_irq_save(flags);
atari_dont_touch_floppy_select = 0;
- sound_ym.rd_data_reg_sel=14; /* Select PSG Port A */
+ sound_ym.rd_data_reg_sel = 14; /* Select PSG Port A */
sound_ym.wd_data = (sound_ym.rd_data_reg_sel |
(MACH_IS_FALCON ? 3 : 7)); /* no drives selected */
/* On Falcon, the drive B select line is used on the printer port, so
@@ -479,7 +479,7 @@ static void fd_deselect( void )
* counts the index signals, which arrive only if one drive is selected.
*/
-static void fd_motor_off_timer( unsigned long dummy )
+static void fd_motor_off_timer(unsigned long dummy)
{
unsigned char status;
@@ -490,7 +490,7 @@ static void fd_motor_off_timer( unsigned long dummy )
if (stdma_islocked())
goto retry;
- status = FDC_READ( FDCREG_STATUS );
+ status = FDC_READ(FDCREG_STATUS);
if (!(status & 0x80)) {
/* motor already turned off by FDC -> deselect drives */
@@ -515,7 +515,7 @@ static void fd_motor_off_timer( unsigned long dummy )
* as possible) and keep track of the current state of the write protection.
*/
-static void check_change( unsigned long dummy )
+static void check_change(unsigned long dummy)
{
static int drive = 0;
@@ -534,11 +534,11 @@ static void check_change( unsigned long dummy )
old_porta = sound_ym.rd_data_reg_sel;
sound_ym.wd_data = (old_porta | DSKDRVNONE) &
~(drive == 0 ? DSKDRV0 : DSKDRV1);
- stat = !!(FDC_READ( FDCREG_STATUS ) & FDCSTAT_WPROT);
+ stat = !!(FDC_READ(FDCREG_STATUS) & FDCSTAT_WPROT);
sound_ym.wd_data = old_porta;
if (stat != UD.wpstat) {
- DPRINT(( "wpstat[%d] = %d\n", drive, stat ));
+ DPRINT(("wpstat[%d] = %d\n", drive, stat));
UD.wpstat = stat;
set_bit (drive, &changed_floppies);
}
@@ -548,7 +548,7 @@ static void check_change( unsigned long dummy )
start_check_change_timer();
}
-
+
/* Handling of the Head Settling Flag: This flag should be set after each
* seek operation, because we don't use seeks with verify.
*/
@@ -562,7 +562,7 @@ static inline int get_head_settle_flag(void)
{
int tmp = HeadSettleFlag;
HeadSettleFlag = 0;
- return( tmp );
+ return(tmp);
}
static inline void copy_buffer(void *from, void *to)
@@ -574,25 +574,25 @@ static inline void copy_buffer(void *from, void *to)
*p2++ = *p1++;
}
-
-
+
+
/* General Interrupt Handling */
-static void (*FloppyIRQHandler)( int status ) = NULL;
+static void (*FloppyIRQHandler)(int status) = NULL;
static irqreturn_t floppy_irq (int irq, void *dummy)
{
unsigned char status;
- void (*handler)( int );
+ void (*handler)(int);
handler = xchg(&FloppyIRQHandler, NULL);
if (handler) {
nop();
- status = FDC_READ( FDCREG_STATUS );
- DPRINT(("FDC irq, status = %02x handler =
%08lx\n",status,(unsigned long)handler));
- handler( status );
+ status = FDC_READ(FDCREG_STATUS);
+ DPRINT(("FDC irq, status = %02x handler = %08lx\n", status,
(unsigned long)handler));
+ handler(status);
}
else {
DPRINT(("FDC irq, no handler\n"));
@@ -605,7 +605,7 @@ static irqreturn_t floppy_irq (int irq, void *dummy)
* recalibrate, then try again, and fail after MAX_ERRORS.
*/
-static void fd_error( void )
+static void fd_error(void)
{
if (IsFormatting) {
IsFormatting = 0;
@@ -619,11 +619,11 @@ static void fd_error( void )
fd_request->errors++;
if (fd_request->errors >= MAX_ERRORS) {
- printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive );
+ printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive);
fd_end_request_cur(-EIO);
}
else if (fd_request->errors == RECALIBRATE_ERRORS) {
- printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive );
+ printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive);
if (SelectedDrive != -1)
SUD.track = -1;
}
@@ -632,16 +632,16 @@ static void fd_error( void )
-#define SET_IRQ_HANDLER(proc) do { FloppyIRQHandler = (proc); } while(0)
+#define SET_IRQ_HANDLER(proc) do { FloppyIRQHandler = (proc); } while
(0)
/* ---------- Formatting ---------- */
-#define FILL(n,val) \
+#define FILL(n, val) \
do { \
- memset( p, val, n ); \
+ memset(p, val, n); \
p += n; \
- } while(0)
+ } while (0)
static int do_format(int drive, int type, struct atari_format_descr *desc)
{
@@ -650,12 +650,12 @@ static int do_format(int drive, int type, struct
atari_format_descr *desc)
unsigned long flags;
DPRINT(("do_format( dr=%d tr=%d he=%d offs=%d )\n",
- drive, desc->track, desc->head, desc->sect_offset ));
+ drive, desc->track, desc->head, desc->sect_offset));
wait_event(fdc_wait, cmpxchg(&fdc_busy, 0, 1) == 0);
local_irq_save(flags);
stdma_lock(floppy_irq, NULL);
- atari_turnon_irq( IRQ_MFP_FDC ); /* should be already, just to be sure
*/
+ atari_turnon_irq(IRQ_MFP_FDC); /* should be already, just to be sure */
local_irq_restore(flags);
if (type) {
@@ -679,38 +679,38 @@ static int do_format(int drive, int type, struct
atari_format_descr *desc)
contents become invalid! */
BufferDrive = -1;
/* stop deselect timer */
- del_timer( &motor_off_timer );
+ del_timer(&motor_off_timer);
- FILL( 60 * (nsect / 9), 0x4e );
- for( sect = 0; sect < nsect; ++sect ) {
- FILL( 12, 0 );
- FILL( 3, 0xf5 );
+ FILL(60 * (nsect / 9), 0x4e);
+ for (sect = 0; sect < nsect; ++sect) {
+ FILL(12, 0);
+ FILL(3, 0xf5);
*p++ = 0xfe;
*p++ = desc->track;
*p++ = desc->head;
*p++ = (nsect + sect - desc->sect_offset) % nsect + 1;
*p++ = 2;
*p++ = 0xf7;
- FILL( 22, 0x4e );
- FILL( 12, 0 );
- FILL( 3, 0xf5 );
+ FILL(22, 0x4e);
+ FILL(12, 0);
+ FILL(3, 0xf5);
*p++ = 0xfb;
- FILL( 512, 0xe5 );
+ FILL(512, 0xe5);
*p++ = 0xf7;
- FILL( 40, 0x4e );
+ FILL(40, 0x4e);
}
- FILL( TrackBuffer+BUFFER_SIZE-p, 0x4e );
+ FILL(TrackBuffer+BUFFER_SIZE-p, 0x4e);
IsFormatting = 1;
FormatError = 0;
ReqTrack = desc->track;
ReqSide = desc->head;
- do_fd_action( drive );
+ do_fd_action(drive);
wait_for_completion(&format_wait);
redo_fd_request();
- return( FormatError ? -EIO : 0 );
+ return(FormatError ? -EIO : 0);
}
@@ -723,18 +723,18 @@ static int do_format(int drive, int type, struct
atari_format_descr *desc)
* set function to propagate the request down to fd_rwsec_done().
*/
-static void do_fd_action( int drive )
+static void do_fd_action(int drive)
{
DPRINT(("do_fd_action\n"));
-
+
if (UseTrackbuffer && !IsFormatting) {
repeat:
- if (IS_BUFFERED( drive, ReqSide, ReqTrack )) {
+ if (IS_BUFFERED(drive, ReqSide, ReqTrack)) {
if (ReqCmd == READ) {
- copy_buffer( SECTOR_BUFFER(ReqSector), ReqData );
+ copy_buffer( SECTOR_BUFFER(ReqSector), ReqData);
if (++ReqCnt < blk_rq_cur_sectors(fd_request)) {
/* read next sector */
- setup_req_params( drive );
+ setup_req_params(drive);
goto repeat;
}
else {
@@ -847,7 +847,7 @@ static void fd_seek_done(int status)
dma_wd.fdc_speed = SUDT->fdc_speed;
if (status & FDCSTAT_RECNF) {
printk(KERN_ERR "fd%d: seek error (to track %d)\n",
- SelectedDrive, ReqTrack );
+ SelectedDrive, ReqTrack);
/* we don't know exactly which track we are on now! */
SUD.track = -1;
fd_error();
@@ -924,7 +924,7 @@ static void fd_rwsec(void)
dma_wd.dma_hi = (unsigned char)paddr;
MFPDELAY();
local_irq_restore(flags);
-
+
/* Clear FIFO and switch DMA to correct mode */
dma_wd.dma_mode_status = 0x90 | rwflag;
MFPDELAY();
@@ -1251,10 +1251,10 @@ static void fd_times_out(unsigned long dummy)
FDC_WRITE(FDCREG_CMD, FDCCMD_FORCI);
udelay(25);
- printk(KERN_ERR "floppy timeout\n" );
+ printk(KERN_ERR "floppy timeout\n");
fd_error();
end:
- atari_enable_irq( IRQ_MFP_FDC );
+ atari_enable_irq(IRQ_MFP_FDC);
}
@@ -1284,7 +1284,7 @@ static void finish_fdc(void)
}
-static void finish_fdc_done( int dummy )
+static void finish_fdc_done(int dummy)
{
unsigned long flags;
@@ -1304,7 +1304,7 @@ static void finish_fdc_done( int dummy )
local_irq_save(flags);
stdma_release();
fdc_busy = 0;
- wake_up( &fdc_wait );
+ wake_up(&fdc_wait);
local_irq_restore(flags);
DPRINT(("finish_fdc() finished\n"));
@@ -1552,7 +1552,7 @@ static int fd_locked_ioctl(struct block_device *bdev,
fmode_t mode,
switch (cmd) {
case FDSETPRM:
case FDDEFPRM:
- /*
+ /*
* MSch 7/96: simple 'set geometry' case: just set the
* 'default' device params (minor == 0).
* Currently, the drive geometry is cleared after each
@@ -1566,8 +1566,8 @@ static int fd_locked_ioctl(struct block_device *bdev,
fmode_t mode,
return -EBUSY;
if (copy_from_user(&setprm, argp, sizeof(setprm)))
return -EFAULT;
- /*
- * first of all: check for floppy change and revalidate,
+ /*
+ * first of all: check for floppy change and revalidate,
* or the next access will revalidate - and clear UDT :-(
*/
@@ -1585,10 +1585,10 @@ static int fd_locked_ioctl(struct block_device *bdev,
fmode_t mode,
return -EINVAL;
}
- /*
+ /*
* type == 0: first look for a matching entry in the type list,
* and set the UD.disktype field to use the perdefined entry.
- * TODO: add user-defined format to head of autoprobe list ?
+ * TODO: add user-defined format to head of autoprobe list ?
* Useful to include the user-type for future autodetection!
*/
@@ -1602,9 +1602,9 @@ static int fd_locked_ioctl(struct block_device *bdev,
fmode_t mode,
dtp = &atari_disk_type[setidx];
/* found matching entry ?? */
- if ( dtp->blocks == setprm.size
+ if (dtp->blocks == setprm.size
&& dtp->spt == setprm.sect
- && dtp->stretch == setprm.stretch ) {
+ && dtp->stretch == setprm.stretch) {
if (UD.flags & FTD_MSG)
printk (KERN_INFO "floppy%d: setting %s
%p!\n",
drive, dtp->name, dtp);
@@ -1619,7 +1619,7 @@ static int fd_locked_ioctl(struct block_device *bdev,
fmode_t mode,
default_params[drive].fdc_speed =
dtp->fdc_speed;
default_params[drive].stretch = dtp->stretch;
}
-
+
return 0;
}
@@ -1715,7 +1715,7 @@ static void __init fd_probe(int drive)
UD.connected = 1;
UD.track = 0;
- switch(UserSteprate[drive]) {
+ switch (UserSteprate[drive]) {
case 2:
UD.steprate = FDCSTEP_2;
break;
--
2.5.3
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
