This patch describes overall binding for TI LMU MFD devices.

Cc: devicet...@vger.kernel.org
Cc: Lee Jones <lee.jo...@linaro.org>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Milo Kim <milo....@ti.com>
---
 Documentation/devicetree/bindings/mfd/ti-lmu.txt | 282 +++++++++++++++++++++++
 1 file changed, 282 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/ti-lmu.txt

diff --git a/Documentation/devicetree/bindings/mfd/ti-lmu.txt 
b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
new file mode 100644
index 0000000..7ccf07e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti-lmu.txt
@@ -0,0 +1,282 @@
+TI LMU(Lighting Management Unit) device tree bindings
+
+TI LMU driver supports lighting devices belows.
+
+   Name              Child nodes
+  ------      -------------------------
+  LM3532       Backlight
+  LM3631       Backlight and regulator
+  LM3632       Backlight and regulator
+  LM3633       Backlight, LED and HWMON
+  LM3695       Backlight
+  LM3697       Backlight and HWMON
+
+Required properties:
+  - compatible: Should be one of lists below.
+                "ti,lm3532"
+                "ti,lm3631"
+                "ti,lm3632"
+                "ti,lm3633"
+                "ti,lm3695"
+                "ti,lm3697"
+  - reg: I2C slave address.
+         0x11 is LM3632
+         0x29 is LM3631
+         0x36 is LM3633, LM3697
+         0x38 is LM3532
+         0x63 is LM3695
+
+Optional properties:
+  - enable-gpios: A GPIO specifier for hardware enable pin.
+
+Required node:
+  - backlight: All LMU devices have backlight child nodes.
+               For the properties, please refer to [1].
+
+Optional nodes:
+  - hwmon: Hardware fault monitoring driver for LM3633 and LM3697.
+           For the property, please refer to [2].
+  - leds: LED properties for LM3633. Please refer to [3].
+  - regulators: Regulator properties for LM3631 and LM3632.
+          Please refer to [4].
+
+[1] Documentation/devicetree/bindings/video/backlight/ti-lmu-backlight.txt
+[2] Documentation/devicetree/bindings/hwm/ti-lmu-hwmon.txt
+[3] Documentation/devicetree/bindings/leds/leds-lm3633.txt
+[4] Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
+
+Examples:
+
+LM3532 has a backlight device. External GPIO is used for enabling LM3532.
+
+lm3532@38 {
+       compatible = "ti,lm3532";
+       reg = <0x38>;
+
+       enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+       backlight {
+               compatible = "ti,lm3532-backlight";
+
+               lcd {
+                       hvled1-used;
+                       hvled2-used;
+                       hvled3-used;
+
+                       ramp-up-msec = <30>;
+                       ramp-down-msec = <0>;
+
+                       backlight-max-microamp = <5000>;
+               };
+       };
+};
+
+LM3631 has 5 regulators with one backlight device.
+
+lm3631@29 {
+       compatible = "ti,lm3631";
+       reg = <0x29>;
+
+       regulators {
+               compatible = "ti,lm363x-regulator";
+
+               vboost {
+                       regulator-name = "lcd_boost";
+                       regulator-min-microvolt = <4500000>;
+                       regulator-max-microvolt = <6350000>;
+                       regulator-always-on;
+               };
+
+               vcont {
+                       regulator-name = "lcd_vcont";
+                       regulator-min-microvolt = <1800000>;
+                       regulator-max-microvolt = <3300000>;
+               };
+
+               voref {
+                       regulator-name = "lcd_voref";
+                       regulator-min-microvolt = <4000000>;
+                       regulator-max-microvolt = <6000000>;
+               };
+
+               vpos {
+                       regulator-name = "lcd_vpos";
+                       regulator-min-microvolt = <4000000>;
+                       regulator-max-microvolt = <6000000>;
+                       regulator-boot-on;
+               };
+
+               vneg {
+                       regulator-name = "lcd_vneg";
+                       regulator-min-microvolt = <4000000>;
+                       regulator-max-microvolt = <6000000>;
+                       regulator-boot-on;
+               };
+       };
+
+       backlight {
+               compatible = "ti,lm3631-backlight";
+
+               lcd {
+                       backlight-name = "lcd_bl";
+                       hvled1-used;
+                       hvled2-used;
+
+                       ramp-up-msec = <300>;
+               };
+       };
+};
+
+LM3632 has 3 regulators with one backlight device. External GPIO is
+used for enabling LM3632.
+
+lm3632@11 {
+       compatible = "ti,lm3632";
+       reg = <0x11>;
+
+       enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+       regulators {
+               compatible = "ti,lm363x-regulator";
+
+               ti,lcm-en1-gpio = <&pioC 0 GPIO_ACTIVE_HIGH>;
+               ti,lcm-en2-gpio = <&pioC 1 GPIO_ACTIVE_HIGH>;
+
+               vboost {
+                       regulator-name = "lcd_boost";
+                       regulator-min-microvolt = <4500000>;
+                       regulator-max-microvolt = <6400000>;
+                       regulator-always-on;
+               };
+
+               vpos {
+                       regulator-name = "lcd_vpos";
+                       regulator-min-microvolt = <4000000>;
+                       regulator-max-microvolt = <6000000>;
+               };
+
+               vneg {
+                       regulator-name = "lcd_vneg";
+                       regulator-min-microvolt = <4000000>;
+                       regulator-max-microvolt = <6000000>;
+               };
+       };
+
+       backlight {
+               compatible = "ti,lm3632-backlight";
+
+               lcd {
+                       backlight-name = "lcd";
+                       hvled1-used;
+                       hvled2-used;
+               };
+       };
+};
+
+LM3633 has multiple backlight channels, LED channels and hardware fault
+monitoring driver. External GPIO is used for enabling LM3633.
+
+lm3633@36 {
+       compatible = "ti,lm3633";
+       reg = <0x36>;
+
+       enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+       backlight {
+               compatible = "ti,lm3633-backlight";
+
+               pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
+               pwm-names = "lmu-backlight";
+
+               main {
+                       backlight-name = "main_lcd";
+                       hvled2-used;
+                       hvled3-used;
+                       backlight-max-microamp = <20000>;
+
+                       ramp-up-msec = <500>;
+                       ramp-down-msec = <500>;
+               };
+
+               front {
+                       backlight-name = "front_lcd";
+                       hvled1-used;
+
+                       ramp-up-msec = <1000>;
+                       ramp-down-msec = <0>;
+
+                       pwm-period = <10000>;
+               };
+       };
+
+       leds {
+               compatible = "ti,lm3633-leds";
+
+               chan2 {
+                       channel-name = "status";
+                       lvled2-used;
+                       led-max-microamp = <6000>;
+               };
+
+               chan456 {
+                       channel-name = "rgb";
+                       lvled4-used;
+                       lvled5-used;
+                       lvled6-used;
+               };
+       };
+
+       hwmon {
+               compatible = "ti,lm3633-hwmon";
+       };
+};
+
+LM3695 is single backlight device.
+
+lm3695@63 {
+       compatible = "ti,lm3695";
+       reg = <0x63>;
+
+       backlight {
+               compatible = "ti,lm3695-backlight";
+
+               lcd {
+                       hvled1-used;
+                       hvled2-used;
+                       backlight-max-microamp = <20000>;
+               };
+       };
+};
+
+LM3697 has one backlight device and hardware fault monitoring driver.
+External GPIO is used for enabling LM3697.
+
+lm3697@36 {
+       compatible = "ti,lm3697";
+       reg = <0x36>;
+
+       enable-gpios = <&pioC 2 GPIO_ACTIVE_HIGH>;
+
+       backlight {
+               compatible = "ti,lm3697-backlight";
+
+               pwms = <&pwm0 0 10000 0>; /* pwm number, period, polarity */
+               pwm-names = "lmu-backlight";
+
+               lcd {
+                       backlight-name = "bl";
+                       hvled1-used;
+                       hvled2-used;
+                       hvled3-used;
+                       backlight-max-microamp = <20000>;
+
+                       ramp-up-msec = <500>;
+                       ramp-down-msec = <500>;
+                       pwm-period = <10000>;
+               };
+       };
+
+       hwmon {
+               compatible = "ti,lm3697-hwmon";
+       };
+};
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to