Signed-off-by: Marc Titinger <mtitin...@baylibre.com>
---
 drivers/iio/adc/ina2xx-iio.c | 51 ++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 49 insertions(+), 2 deletions(-)

diff --git a/drivers/iio/adc/ina2xx-iio.c b/drivers/iio/adc/ina2xx-iio.c
index 257d8d5..92169e1 100644
--- a/drivers/iio/adc/ina2xx-iio.c
+++ b/drivers/iio/adc/ina2xx-iio.c
@@ -42,7 +42,8 @@
 /* settings - depend on use case */
 #define INA219_CONFIG_DEFAULT           0x399F /* PGA=8 */
 #define INA226_CONFIG_DEFAULT           0x4327
-#define INA226_DEFAULT_AVG             4
+#define INA226_DEFAULT_AVG              4
+#define INA226_DEFAULT_FREQ             454
 
 #define INA2XX_RSHUNT_DEFAULT           10000
 
@@ -51,6 +52,8 @@
 #define INA226_READ_AVG(reg)            (((reg) & INA226_AVG_RD_MASK) >> 9)
 #define INA226_SHIFT_AVG(val)           ((val) << 9)
 
+#define INA226_SFREQ_RD_MASK            0x01f8
+
 static struct regmap_config ina2xx_regmap_config = {
        .reg_bits = 8,
        .val_bits = 16,
@@ -172,6 +175,10 @@ static int ina2xx_read_raw(struct iio_dev *indio_dev,
                return ina2xx_get_value(chip, INA2XX_CALIBRATION, regval,
                                        val, val2);
 
+       case IIO_CHAN_INFO_SAMP_FREQ:
+               *val = chip->freq;
+               return IIO_VAL_INT;
+
        default:
                return -EINVAL;
        }
@@ -216,6 +223,38 @@ static unsigned int ina226_set_average(struct 
ina2xx_chip_info *chip,
        return 0;
 }
 
+/*
+ * Conversion times in uS
+ */
+static const int ina226_conv_time_tab[] = { 140, 204, 332, 588, 1100,
+       2116, 4156, 8244};
+
+static unsigned int ina226_set_frequency(struct ina2xx_chip_info *chip,
+                                        unsigned int val,
+                                        unsigned int *config)
+{
+       int bits;
+
+       if (val > 3550  || val < 50)
+               return -EINVAL;
+
+       /* integration time in uS, for both voltage channels */
+       val = DIV_ROUND_CLOSEST(1000000, 2 * val);
+
+       bits = find_closest(val, ina226_conv_time_tab,
+                           ARRAY_SIZE(ina226_conv_time_tab));
+
+       chip->period_us = 2 * ina226_conv_time_tab[bits];
+
+       chip->freq = DIV_ROUND_CLOSEST(1000000, chip->period_us);
+
+       *config &= ~INA226_SFREQ_RD_MASK;
+       *config |= (bits << 3) | (bits << 6);
+
+       return 0;
+}
+
+
 static int ina2xx_write_raw(struct iio_dev *indio_dev,
                            struct iio_chan_spec const *chan,
                            int val, int val2, long mask)
@@ -238,6 +277,11 @@ static int ina2xx_write_raw(struct iio_dev *indio_dev,
                ret = ina226_set_average(chip, val, &tmp);
                break;
 
+       case IIO_CHAN_INFO_SAMP_FREQ:
+
+               ret = ina226_set_frequency(chip, val, &tmp);
+               break;
+
        default:
                ret = -EINVAL;
        }
@@ -257,6 +301,7 @@ _err:
        .channel = (_index), \
        .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
        .info_mask_shared_by_dir = BIT(IIO_CHAN_INFO_AVERAGE_RAW) | \
+                                       BIT(IIO_CHAN_INFO_SAMP_FREQ) | \
                                   BIT(IIO_CHAN_INFO_CALIBSCALE), \
        .scan_index = (_index), \
        .scan_type = { \
@@ -355,8 +400,10 @@ static int ina2xx_probe(struct i2c_client *client,
 
        /* Patch the current config register with default. */
        val = chip->config->config_default;
-       if (id->driver_data == ina226)
+       if (id->driver_data == ina226) {
                ina226_set_average(chip, INA226_DEFAULT_AVG, &val);
+               ina226_set_frequency(chip, INA226_DEFAULT_FREQ, &val);
+       }
 
        ret = ina2xx_init(chip, val);
        if (ret < 0) {
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to