Since Linux gpio framework return 0 for output, 1 for input.
But HW use 0 stands for input, and 1 stands for output.
So use negative to correct it.
And gpio_chip.get is used to get input value, no need to get
output value, so removing it.
Signed-off-by: Hongzhou Yang <hongzhou.y...@mediatek.com>
---
Base on v4.4-rc1, resend it.
Add get direction support.
Remove gpio_chip.get value for output direction.
drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 11 ++++-------
1 file changed, 4 insertions(+), 7 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index f307f1d..5c71727 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -747,7 +747,7 @@ static int mtk_gpio_get_direction(struct gpio_chip *chip,
unsigned offset)
reg_addr = mtk_get_port(pctl, offset) + pctl->devdata->dir_offset;
bit = BIT(offset & 0xf);
regmap_read(pctl->regmap1, reg_addr, &read_val);
- return !!(read_val & bit);
+ return !(read_val & bit);
}
static int mtk_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -757,12 +757,8 @@ static int mtk_gpio_get(struct gpio_chip *chip, unsigned
offset)
unsigned int read_val = 0;
struct mtk_pinctrl *pctl = dev_get_drvdata(chip->dev);
- if (mtk_gpio_get_direction(chip, offset))
- reg_addr = mtk_get_port(pctl, offset) +
- pctl->devdata->dout_offset;
- else
- reg_addr = mtk_get_port(pctl, offset) +
- pctl->devdata->din_offset;
+ reg_addr = mtk_get_port(pctl, offset) +
+ pctl->devdata->din_offset;
bit = BIT(offset & 0xf);
regmap_read(pctl->regmap1, reg_addr, &read_val);
@@ -997,6 +993,7 @@ static struct gpio_chip mtk_gpio_chip = {
.owner = THIS_MODULE,
.request = gpiochip_generic_request,
.free = gpiochip_generic_free,
+ .get_direction = mtk_gpio_get_direction,
.direction_input = mtk_gpio_direction_input,
.direction_output = mtk_gpio_direction_output,
.get = mtk_gpio_get,
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
