Jeff Garzik wrote:
>
> Remi Turk wrote:
> > Uniform Multi-Platform E-IDE driver Revision: 6.31
> > ide: Assuming 33MHz system bus speed for PIO modes; override with
> > idebus=xx
> > ALI15X3: IDE controller on PCI bus 00 dev 78
> > PCI: No IRQ known for interrupt pin A of device 00:0f.0. Please try
> > using pci=biosirq.
>
> test10-pre6 gives this warning?
>
> Can you post the output of dump_pirq, from the pcmcia_cs package? (if
> you don't have it already, http://pcmcia-cs.sourceforge.net/)
>
Here it is:
Interrupt routing table found at address 0xf0b40:
Version 1.0, size 0x00a0
Interrupt router is device 00:07.0
PCI exclusive interrupt mask: 0x0000 []
Compatible router: vendor 0x10b9 device 0x1533
Device 00:0c.0 (slot 1):
INTA: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:0b.0 (slot 2):
INTA: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:0a.0 (slot 3):
INTA: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:09.0 (slot 4): Multimedia audio controller
INTA: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:0d.0 (slot 5):
INTA: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:02.0 (slot 0): USB Controller
INTA: link 0x59, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:01.0 (slot 0): PCI bridge
INTA: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Device 00:06.0 (slot 0):
INTA: link 0x03, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTB: link 0x04, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTC: link 0x01, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
INTD: link 0x02, irq mask 0x1eb8 [3,4,5,7,9,10,11,12]
Interrupt router at 00:07.0: AcerLabs Aladdin M1533 PCI-to-ISA bridge
INT1 (link 1): irq 11
INT2 (link 2): unrouted
INT3 (link 3): irq 5
INT4 (link 4): irq 10
INT5 (link 5): unrouted
INT6 (link 6): unrouted
INT7 (link 7): unrouted
INT8 (link 8): unrouted
Serial IRQ: [disabled] [quiet] [frame=21] [pulse=12]
--
Linux 2.4.0-test10-pre6 #1 Sat Oct 28 14:15:54 CEST 2000
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
Please read the FAQ at http://www.tux.org/lkml/
