Add and enable the external crystal for the SCIF_CLK and its pinctrl, to
be used by the Baud Rate Generator for External Clock (BRG) on (H)SCIF.
This increases the range and accuracy of supported baud rates:
- SCIF:
- Supports now 50, 75, 110, 1152000, 1500000, 2000000, and
4000000 bps,
- Perfect match for standard 50-460800, and 9216000 bps.
- More accurate 576000 bps.
- HSCIF:
- Supports now 50, 75, 110, 134, 150, and 200 bps,
- Perfect match for standard 50-460800, and 9216000 bps.
- More accurate 576000, 1152000, 3000000, 3500000, and 4000000
bps.
Signed-off-by: Geert Uytterhoeven <geert+rene...@glider.be>
---
arch/arm/boot/dts/r8a7791-koelsch.dts | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts
b/arch/arm/boot/dts/r8a7791-koelsch.dts
index da263dbb126db78c..9c3bc94791fc932a 100644
--- a/arch/arm/boot/dts/r8a7791-koelsch.dts
+++ b/arch/arm/boot/dts/r8a7791-koelsch.dts
@@ -320,6 +320,9 @@
};
&pfc {
+ pinctrl-0 = <&scif_clk_pins>;
+ pinctrl-names = "default";
+
i2c2_pins: i2c2 {
renesas,groups = "i2c2";
renesas,function = "i2c2";
@@ -340,6 +343,11 @@
renesas,function = "scif1";
};
+ scif_clk_pins: scif_clk {
+ renesas,groups = "scif_clk";
+ renesas,function = "scif_clk";
+ };
+
ether_pins: ether {
renesas,groups = "eth_link", "eth_mdio", "eth_rmii";
renesas,function = "eth";
@@ -440,6 +448,11 @@
status = "okay";
};
+&scif_clk {
+ clock-frequency = <14745600>;
+ status = "okay";
+};
+
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
