Hi Felipe,
On 2015년 11월 20일 14:33, Chanwoo Choi wrote:
> Hi Felipe,
>
> Looks good to me. But I have one comment.
>
> On 2015년 11월 13일 02:57, Felipe Balbi wrote:
>> TPS659038 can remux its GPIO_1 as VBUSDET output,
>> which can be tied to a SoC GPIO and used as a VBUS
>> interrupt.
>>
>> Beagle X15 uses that, in fact, and without it, I
>> could not get USB peripheral working with that
>> board.
>>
>> Signed-off-by: Felipe Balbi <ba...@ti.com>
>> ---
>> drivers/extcon/extcon-palmas.c | 22 ++++++++++++++++++++--
>> 1 file changed, 20 insertions(+), 2 deletions(-)
>>
>> diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
>> index 93c30a885740..7985d092c069 100644
>> --- a/drivers/extcon/extcon-palmas.c
>> +++ b/drivers/extcon/extcon-palmas.c
>> @@ -296,10 +296,28 @@ static int palmas_usb_probe(struct platform_device
>> *pdev)
>> }
>>
>> if (palmas_usb->enable_vbus_detection) {
>> + int irq = platform_get_irq(pdev, 0);
>> +
>> + if (irq > 0) {
>> + /* remux GPIO_1 as VBUSDET */
>> + status = palmas_update_bits(palmas,
>> PALMAS_PU_PD_OD_BASE,
>> + PALMAS_PRIMARY_SECONDARY_PAD1,
>> +
>> PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_MASK,
>> + (1 << 3));
>
> PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT is appropriate instead of using
> '3'.
> Also, I don't recommend the over line 80. The everything else is good
>
>
>> + if (status < 0) {
>> + dev_err(&pdev->dev, "can't remux GPIO1\n");
>> + return status;
>> + }
>> +
>> + palmas_usb->vbus_irq = irq;
>> + } else {
>> + irq = regmap_irq_get_virq(palmas->irq_data,
>> + PALMAS_VBUS_IRQ);
>> + palmas_usb->vbus_irq = irq;
>> + }
>> +
>> palmas_usb->vbus_otg_irq = regmap_irq_get_virq(palmas->irq_data,
>> PALMAS_VBUS_OTG_IRQ);
>> - palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data,
>> - PALMAS_VBUS_IRQ);
>> status = devm_request_threaded_irq(palmas_usb->dev,
>> palmas_usb->vbus_irq, NULL,
>> palmas_vbus_irq_handler,
>>
>
> Thanks,
> Chanwoo Choi
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
>
If you are OK about following patch, I'll apply it on extcon branch.
diff --git a/drivers/extcon/extcon-palmas.c b/drivers/extcon/extcon-palmas.c
index 93c30a885740..f601370c9466 100644
--- a/drivers/extcon/extcon-palmas.c
+++ b/drivers/extcon/extcon-palmas.c
@@ -296,10 +296,29 @@ static int palmas_usb_probe(struct platform_device *pdev)
}
if (palmas_usb->enable_vbus_detection) {
+ int irq = platform_get_irq(pdev, 0);
+
+ if (irq > 0) {
+ /* remux GPIO_1 as VBUSDET */
+ status = palmas_update_bits(palmas,
+ PALMAS_PU_PD_OD_BASE,
+ PALMAS_PRIMARY_SECONDARY_PAD1,
+ PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_MASK,
+ (1 <<
PALMAS_PRIMARY_SECONDARY_PAD1_GPIO_1_SHIFT));
+ if (status < 0) {
+ dev_err(&pdev->dev, "can't remux GPIO1\n");
+ return status;
+ }
+
+ palmas_usb->vbus_irq = irq;
+ } else {
+ irq = regmap_irq_get_virq(palmas->irq_data,
+ PALMAS_VBUS_IRQ);
+ palmas_usb->vbus_irq = irq;
+ }
+
palmas_usb->vbus_otg_irq = regmap_irq_get_virq(palmas->irq_data,
PALMAS_VBUS_OTG_IRQ);
- palmas_usb->vbus_irq = regmap_irq_get_virq(palmas->irq_data,
- PALMAS_VBUS_IRQ);
status = devm_request_threaded_irq(palmas_usb->dev,
palmas_usb->vbus_irq, NULL,
palmas_vbus_irq_handler,
--
1.9.1
Thanks,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
