Hi, Andy Gross <[email protected]> writes: > This patch adds automatic configuration of the TCSR phy mux register based on > the syscon-tcsr devicetree entry. This configuration is optional, as some > platforms may not require the mux selection. > > Signed-off-by: Andy Gross <[email protected]>
just when I find a way to make a generic dwc3-of-simple.c glue layer :-p
I can, certainly drop my patches but I need more details on the syscon
usage below.
> ---
> drivers/usb/dwc3/dwc3-qcom.c | 25 +++++++++++++++++++++++++
> 1 file changed, 25 insertions(+)
>
> diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
> index 0880260..fcf264c 100644
> --- a/drivers/usb/dwc3/dwc3-qcom.c
> +++ b/drivers/usb/dwc3/dwc3-qcom.c
> @@ -17,6 +17,8 @@
> #include <linux/of.h>
> #include <linux/of_platform.h>
> #include <linux/platform_device.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
>
> struct dwc3_qcom {
> struct device *dev;
> @@ -30,6 +32,9 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
> {
> struct device_node *node = pdev->dev.of_node;
> struct dwc3_qcom *qdwc;
> + struct regmap *regmap;
> + u32 mux_offset;
> + u32 mux_bit;
> int ret;
>
> qdwc = devm_kzalloc(&pdev->dev, sizeof(*qdwc), GFP_KERNEL);
> @@ -58,6 +63,26 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
> qdwc->sleep_clk = NULL;
> }
>
> + /* look for tcsr and if present, provision it */
> + regmap = syscon_regmap_lookup_by_phandle(node, "syscon-tcsr");
> + if (!IS_ERR(regmap)) {
> + if (of_property_read_u32_index(node, "syscon-tcsr", 1,
> + &mux_offset)) {
> + dev_err(qdwc->dev, "missing USB TCSR mux offset\n");
> + return -EINVAL;
> + }
> + if (of_property_read_u32_index(node, "syscon-tcsr", 2,
> + &mux_bit)) {
> + dev_err(qdwc->dev, "missing USB TCSR mux bit\n");
> + return -EINVAL;
> + }
> +
> + regmap_update_bits(regmap, mux_offset, BIT(mux_bit),
> + BIT(mux_bit));
what is tcsr and what does it ? It also seems to be optional, why's that ?
--
balbi
signature.asc
Description: PGP signature
