Hello.
On 11/21/2015 3:17 AM, Joshua Henderson wrote:
From: Andrei Pistirica <[email protected]>
Document the devicetree bindings for the USART peripheral found on
Microchip PIC32 class devices.
Signed-off-by: Andrei Pistirica <[email protected]>
Signed-off-by: Joshua Henderson <[email protected]>
---
.../bindings/serial/microchip,pic32-usart.txt | 29 ++++++++++++++++++++
1 file changed, 29 insertions(+)
create mode 100644
Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
b/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
new file mode 100644
index 0000000..c87321c
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-usart.txt
@@ -0,0 +1,29 @@
+* Microchip Universal Synchronous Asynchronous Receiver/Transmitter (USART)
+
+Required properties:
+- compatible: Should be "microchip,pic32-usart"
+- reg: Should contain registers location and length
+- interrupts: Should contain interrupt
+- pinctrl: Should contain pinctrl for TX/RX/RTS/CTS
No such prop in the example.
+
+Optional properties:
+- microchip,uart-has-rtscts : Indicate the uart has hardware flow control
+- rts-gpios: RTS pin for USP-based UART if microchip,uart-has-rtscts
+- cts-gpios: CTS pin for USP-based UART if microchip,uart-has-rtscts
+
+Example:
+ usart0: serial@1f822000 {
+ compatible = "microchip,pic32-usart";
+ reg = <0x1f822000 0x50>;
+ interrupts = <UART1_FAULT DEFAULT_INT_PRI IRQ_TYPE_NONE>,
+ <UART1_RECEIVE_DONE DEFAULT_INT_PRI IRQ_TYPE_NONE>,
+ <UART1_TRANSFER_DONE DEFAULT_INT_PRI
IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &pinctrl_uart1
+ &pinctrl_uart1_cts
+ &pinctrl_uart1_rts>;
The above 2 props are undocumented.
[...]
MBR, Sergei
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
